Image
Product
Price
- Wheel Bearing
- Install Identical to OE
- National 510092 Wheel Bearing
- Product Attributes:
- Design: Double Row Angular Contact
- Width (Inch): 1.732
- Outer Race Outside Diameter (Inch): 3.583
- Outer Race Outside Diameter (MM): 91.000
- Inner Race Bore (Inch): 2.008
- Inner Race Width (MM): 44.000
- Footnote: Gen1
- Inner Race Width (Inch): 1.732
- Outer Race Width (Inch): 1.732
- Outer Race Width (MM): 44.000
- Bore (Inch): 2.008
- Inner Race Bore (MM): 51.000
- Outside Diameter (Inch): 3.583
- Part Description: Wheel Bearing
- Designed to meet or exceed OE quality, premium-quality bearings from National® are manufactured to exacting standards to deliver lasting performance and extended bearing life.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
051-4187, 44300-SJK-J01, 44300-STK-951, FW97, WB000011, WB000012
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Acura RDX | Front |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- This bearing is equipped with an internal ABS sensor magnet. Care must be taken during installation on vehicles with ABS to insure that the sensor magnet is located on the correct side of the bearing housing. Failure to do so may cause a malfunction in the ABS system. For more info, refer to the factory service information or check with your local dealer.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Acura RDX | Front |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- This bearing is equipped with an internal ABS sensor magnet. Care must be taken during installation to insure that the sensor magnet is located on the correct side of the bearing housing. Failure to do so may cause a malfunction in the ABS system. For more info, refer to the appropriate section of your service manual or check with your local dealer.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Acura TL | Front |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- This bearing is equipped with an internal ABS sensor magnet. Care must be taken during installation on vehicles with ABS to insure that the sensor magnet is located on the correct side of the bearing housing. Failure to do so may cause a malfunction in the ABS system. For more info, refer to the factory service information or check with your local dealer.
- Front
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Acura RDX | Front |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Acura TL | Front |
- Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
- Transit Auto
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive Drill and Slot design for left or right installation
- PPF USA-engineered low-resin Semi-Metallic formula eliminates brake fade and glazing for optimal braking power
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- INCLUDES: 2x Rear Kugel Wheel Bearing and Hub Assembly (Both Side) + 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Coated Drilled Slotted DS-One Disc Brake Rotor (Both Side) + 1x Front Semi-Metallic Positive Plus Brake Pad Set (Hardware Include
- Kit variations : KBB-106201 KBB-106596 KBB-106999 KBB-107426 KBB-107516 KBB-107668 KBB-108014 KBB-108356 KBB-117194 KBB-117545 KBB-117949
This Part Fits the Following OEM/Substitute Numbers:
120.40036, 120.40040, 121.40036, 121.40040, 125669, 2164607, 2164634, 24886711, 248880402, 31257, 31420, 4886711, 48880402, 510073, 510098, 512256, 537, 7256...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2007 - Acura CSX | Front and Rear | Touring |
- Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
- Transit Auto
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive G3000 heat-flowed castings steel give our rotors the ideal balance between tensile and hardness and provide consistent wear, long life, and quiet operation
- Exclusive high-density ceramic formula for optimal braking power and quietness. Our formula provides unmatched braking power in hot or cold weather with optimal pad life
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- INCLUDES: 2x Rear Kugel Wheel Bearing and Hub Assembly (Both Side) + 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Top Quality Disc Brake Rotor (Both Side) + 1x Front Ceramic TEC Brake Pad Set (Hardware Included) + 2x Rear Top Quality Disc Brak
- Kit variations : KBB-106171 KBB-106561 KBB-107643 KBB-107987 KBB-108328 KBB-117071 KBB-118046
This Part Fits the Following OEM/Substitute Numbers:
120.40046, 120.40047, 120.40061, 121.40046, 121.40047, 121.40061, 125670, 125674, 126209, 24886795, 24886849, 248880151, 248880666, 31275, 31286, 31316, 31519, 4886795...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2007 - Acura TL | Front and Rear | Base |
- Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
- Transit Auto
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive G3000 heat-flowed castings steel give our rotors the ideal balance between tensile and hardness and provide consistent wear, long life, and quiet operation
- Exclusive high-density ceramic formula for optimal braking power and quietness. Our formula provides unmatched braking power in hot or cold weather with optimal pad life
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- INCLUDES: 2x Rear Kugel Wheel Bearing and Hub Assembly (Both Side) + 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Top Quality Disc Brake Rotor (Both Side) + 1x Front Ceramic TEC Brake Pad Set (Hardware Included) + 2x Rear Top Quality Disc Brak
This Part Fits the Following OEM/Substitute Numbers:
1049, 120.40047, 120.40061, 120.40062, 121.40047, 121.40061, 121.40062, 125670, 126209, 24886849, 248880151, 248880304, 31286, 31316, 31374, 4886849, 48880151, 48880304...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2007 - Acura TL | Front and Rear | Type-S |
- Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
- Transit Auto
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive G3000 heat-flowed castings steel give our rotors the ideal balance between tensile and hardness and provide consistent wear, long life, and quiet operation
- Exclusive high-density ceramic formula for optimal braking power and quietness. Our formula provides unmatched braking power in hot or cold weather with optimal pad life
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- INCLUDES: 2x Rear Kugel Wheel Bearing and Hub Assembly (Both Side) + 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Top Quality Disc Brake Rotor (Both Side) + 1x Front Ceramic TEC Brake Pad Set (Hardware Included) + 2x Rear Top Quality Disc Brak
- Kit variations : KBB-106201 KBB-106596 KBB-107327 KBB-107426 KBB-107516 KBB-107668 KBB-108014 KBB-108356 KBB-117194 KBB-117545 KBB-117949
This Part Fits the Following OEM/Substitute Numbers:
120.40036, 120.40040, 121.40036, 121.40040, 125669, 24886711, 248880402, 31257, 31420, 4886711, 48880402, 510073, 510098, 512256, 537, 7256, 7418, 74886711...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2007 - Acura CSX | Front and Rear | Touring |
- Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
- Transit Auto
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive G3000 heat-flowed castings steel give our rotors the ideal balance between tensile and hardness and provide consistent wear, long life, and quiet operation
- Exclusive high-density ceramic formula for optimal braking power and quietness. Our formula provides unmatched braking power in hot or cold weather with optimal pad life
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- INCLUDES: 2x Rear Kugel Wheel Bearing and Hub Assembly (Both Side) + 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Top Quality Disc Brake Rotor (Both Side) + 1x Front Ceramic TEC Brake Pad Set (Hardware Included) + 2x Rear Top Quality Disc Brak
- Kit variations : KBB-106254 KBB-106653 KBB-107717 KBB-108065 KBB-108408 KBB-117288 KBB-118045
This Part Fits the Following OEM/Substitute Numbers:
120.40046, 120.40055, 121.40046, 121.40055, 125674, 126082, 24886795, 248880138, 248880666, 31275, 31315, 31519, 4886795, 48880138, 48880666, 510073, 510098, 512327...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Acura TSX | Front and Rear |
Showing 1 - 10 of 101 products
Loading...