Image
Product
Price
- Performance Air Intake, fits 2022+ Subaru WRX
- Performance Air Intake, fits 2022+ Subaru WRX
- Product Attributes:
- SellingPoint04: Highly-aggressive Intake Tone Under Acceleration
- SellingPoint05: Powder-coated Airbox Keeps Unwanted Hot Air From Entering The Air Intake
- SellingPoint06: Precision Cnc-machined Aluminum Maf Housing For Improved Flow And Accurate Maf Readings
- SellingPoint07: Mandrel-bent Aluminum Pipe Eliminates Restrictions And Increases Airflow
- SellingPoint01: Direct Fit For 2022+ Subaru Wrx
- SellingPoint02: Power Gains Of Up To 13.3 Hp And 16.6 Lb-ft On Stock Tune
- SellingPoint03: Dyno-tested For Safe Air/fuel Ratios Without Tuning
- TechSpec Air Filter Part Number: Mmaf-3007
- TechSpec Chassis Codes: N/a
- SellingPoint08: Mishimoto High-flow Oiled Air Filter Receives Maximum Airflow From The Front Of The Vehicle
- SellingPoint09: Us Patent Pending
- SellingPoint10: Mishimoto Lifetime Warranty
- TechSpec Note: Filter Re-oil Is Not Included In Lifetime Warranty.
- SellingPoint15: N/a
- TechSpec Filter Diameter: 5.875
- Install Difficulty: 2
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: Fa24
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Caution: N/a
- TechSpec Applications: 2022+ Subaru Wrx
- TechSpec Includes: (1) Aluminum Intake Pipe--(1) Cnc-machined Aluminum Maf Sensor Housing--(1) High-flow, Oiled Filter--(1) Powder Coated Airbox--(1) Silicone Coupler--(3) Worm Gear Clamps--mounting Hardware--mishimoto Lifetime Warranty
-
Features:
- Direct fit for 2022+ Subaru WRX
- Power gains of up to 13.3 HP and 16.6 lb-ft on stock tune
- Dyno-tested for safe air/fuel ratios without tuning
- Highly-aggressive intake tone under acceleration
- Powder-coated airbox keeps unwanted hot air from entering the air intake
- Precision CNC-machined aluminum MAF housing for improved flow and accurate MAF readings
- Mandrel-bent aluminum pipe eliminates restrictions and increases airflow
- Mishimoto high-flow oiled air filter receives maximum airflow from the front of the vehicle
- Mishimoto Lifetime Warranty
- Air intakes are some of the most fundamental bolt-on upgrades to a vehicle, often making them a first for many enthusiasts. The 2022+ Subaru WRX is no different. While the stock set up is adequate for daily commuting, your 2022+ WRX needs to be able to breathe easy to keep up with the demands of an enthusiast's spirited driving. The engineers at Mishimoto set out to unlock your WRX’s full potential with the 2022+ Subaru WRX Performance Air Intake.----Our engineers started by replacing the restrictive stock air filter with our performance oiled cone filter to substantially increase air volume, then paired it with a durable powder-coated steel airbox for superior heat protection. Our CNC-machined, precision-designed MAF housing allows for increased intake air flow while maintaining safe air-fuel ratios, eliminating the need for a tune after installation. This mates with our mandrel-bent aluminum inlet pipe to provide superior airflow over stock and gives your WRX a more aggressive tone under acceleration. This intake boasts a 75.4-percent reduction in air restriction with dyno-proven gains of up to 13.3 HP and 16.6 lb-ft of torque on stock tune.----The included Mishimoto oiled air filter is completely serviceable, allowing for a lifetime of reliable use. Additionally, this kit includes a silicone coupler, clamps, and all other hardware necessary to complete a quick installation for easy bolt-on performance. As with all Mishimoto products, this 2022+ Subaru WRX Performance Air Intake is backed by the Mishimoto Lifetime Warranty.
This Part Fits the Following OEM/Substitute Numbers:
200-60-INT-003
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Subaru WRX |
- Performance Air Intake System
- Includes Air Filter/Heat Shield/Textured Black Tubing; Estimated Horsepower Gain 5.22 HP At 4683 RPM
- K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Typhoon Cold Air Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Clamp Style: Worm Gear
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 5.22 Hp @ 4683 Rpm
- California Restricted: Not Legal For Sale Or Use In California
- TUV Approved (Europe): No
- Replacement Filter: Ru-4960xd
- Item Weight: 11.200 Lbs. (5.1 Kg)
- RPM: 4683
- Product Box Height: 12.500 In. (318mm)
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Product Box Width: 18.250 In. (464 Mm)
- Product Box Length: 18.250 In. (464mm)
- System Type: Complete Cold Air
- Clamp Quantity: 5
- Intake Pipe Color: Black
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Stainless Steel
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: Aluminum
- Horse Power Increase: 5 Hp
- Air Filter Element Washable: Yes
- Package Material: Corrugated
- Couplers Included: 2
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: No
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Easy To Install Usually In 90 Minutes or Less
- Lasts Up To 100000 Miles Before Service Is Required
- Replaces Entire Factory Air Intake System
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2023 - Subaru Crosstrek | H | 1995 | 4 Cyl 2.0L | Touring | - |
- Replacement Air Filter
- Panel; H-1.563 in.; L-9.125 in.; W-8.656 in.
- K/N s replacement High-Flow Air Filters are designed to increase horsepower while providing exceptional engine protection; and are covered by K/N s No-Hassle Lifetime Limited Warranty.
- Air Filter
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- WARNING CA Proposition 65: Yes
- Item Weight: 1.300 Lbs. (0.6 Kg)
- Machine Washable: Yes
- Product Box Height: 11.560 In. (294mm)
- Filter Material: Cotton Gauze
- Inside Diameter: Oem
- Product Box Width: 1.750 In. (44 Mm)
- Product Box Length: 10.440 In. (265mm)
- Item Height: 1.563 In. (40mm)
- Prop 65 (C, R or CR): Cr
- Package Content: 1
- Pre-Screened: No
- Automotive Item Grade: High Performance
- Outside Width: 8.656 In. (220mm)
- Package Contents: 1 Air Filter
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Flange Angle: 0 Degree
- Overall Length: 9.125 In.
- Package Quantity: 1
- Shape: Panel
- Package Material: Corrugated
- Frame Design: Flexible
- Filter Re-Oiling Amount: 1.36 Oz (40 Ml)
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Cap Outside Diameter: N/a
- Filter Style: Washable
- Outside Length: 9.125 In. (232mm)
- Package Type: Box
-
Features:
- Designed To Boost Horsepower And Acceleration
- Washable And Reusable
- High Air Flow With Exceptional Filtration
- Lasts Up To 50000 Miles Before Cleaning
- Works With Original Equip. Mfg. Vehicle Electronics
- Will Not Void Vehicle Warranty
- Million Mile Limited Warranty
- K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!
This Part Fits the Following OEM/Substitute Numbers:
16546AA150, 16546AA16A, A1985, A3109C, A35592, PA35592, SA9997
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Subaru Outback |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Subaru Forester |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Production: -04/21/2022
Additional Fitment Information:
| Vehicle | Prod. Date Range |
|---|---|
| 2023 - Subaru Crosstrek | To:04-21-22 |
- PUR offers premium air filters at reasonable pricing and have been the reference accross North America for over 40 years.
- PUR
-
Features:
- Keeps damaging particles from entering the engine and causing increased engine wear
- Improves engine response time Protects the operational performance of your engine
- Reduces ecological footprint through fuel economy
- Boosts fuel economy by 6% to 11%
- 98% Efficiency Against Rocks And Other Debris on the Road
This Part Fits the Following OEM/Substitute Numbers:
93926, A31464, CA12295, N/A, PA99365, WA10713, XA11536
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Subaru WRX |
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Subaru Forester |
Additional Fitment Information:
| Vehicle | Prod. Date Range |
|---|---|
| 2023 - Subaru Crosstrek | To:04-21-22 |
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Subaru BRZ |
- DryFlow Air Filter
- Panel; H-1.563 in.; L-9.125 in.
- AEM Dryflow Air Filters are washable synthetic air filters designed for an optimum combination of air flow; filtration; and performance. They use an oil-free filtration material that allows easy cleaning and excellent filtration.
- Dryflow Air Filter
- Product Attributes:
- Shape: Panel
- WARNING CA Proposition 65: Yes
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Outside Length: 9.125 In. (232mm)
- Item Height: 1.563 In. (40mm)
- Prop 65 (C, R or CR): Cr
-
Features:
- Designed To Increase Horsepower And Throttle Response
- Cleanable And Guaranteed For The Life Of Your Vehicle
- Captures Up To 99 Percent Of Harmful Contaminants
- Outstanding Performance Even In Dusty Racing Conditions
- Does Not Require Oil
- Will NOT Void Vehicle Warranty
- Manufactured In The USA
- Limited Lifetime Warranty
- AEM Dryflow Air Filters are washable synthetic air filters designed for an optimum combination of air flow, filtration, and performance. AEM Dryflow filters use an innovative high performance oil-free filtration material that allows easy cleaning, durable service, and excellent filtration.
This Part Fits the Following OEM/Substitute Numbers:
16546AA150, 16546AA16A, A1985, A3109C, A35592, PA35592, SA9997
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Subaru Ascent |
Showing 1 - 10 of 18 products
Loading...