1991 Mercedes Benz 190E Belts and Cooling Parts
Choose your Part Name for your 1991 Mercedes-Benz 190E
A/C Drive Belt Idler Pulley Bolt
Accessory Drive Belt
Accessory Drive Belt Idler Pulley
Accessory Drive Belt Tensioner
Accessory Drive Belt Tensioner Kit
Accessory Drive Belt Tensioner Pulley
Automatic Transmission Oil Cooler Hose
Auxiliary Engine Cooling Fan Relay
Belt Tensioner Adjuster
Belt Tensioner Bracket
Belt Tensioner Damper
Drive Belt Idler Nut
Engine Auxiliary Water Pump
Engine Coolant Bleeder Screw
Engine Coolant Bypass Hose
Engine Coolant Level Sensor
Engine Coolant Level Sensor O-Ring
Engine Coolant Overflow Hose
Engine Coolant Reservoir
Engine Coolant Reservoir Cap
Engine Coolant Reservoir Plug Kit
Engine Coolant Temperature Sensor
Engine Coolant Thermostat
Engine Coolant Thermostat / Water Outlet Assembly
Engine Coolant Thermostat Banjo Fitting
Engine Coolant Thermostat Housing Cap
Engine Coolant Thermostat Housing Gasket
Engine Coolant Thermostat Seal
Engine Cooling Fan
Engine Cooling Fan Assembly
Engine Cooling Fan Blade
Engine Cooling Fan Clutch
Engine Cooling Fan Clutch Bearing Bracket
Engine Cooling Fan Clutch Blade
Engine Cooling Fan Clutch Bolt
Engine Cooling Fan Clutch Nut
Engine Cooling Fan Controller
Engine Cooling Fan Pulley
Engine Cooling Fan Resistor
Engine Cooling Fan Shroud
Engine Cooling Fan Shroud Clamp
Engine Cooling Fan Switch
Engine Water Pump
Engine Water Pump Drain Tube
Engine Water Pump Gasket
Engine Water Pump Housing
Engine Water Pump O-Ring
Engine Water Pump Pulley Bolt Cover
Radiator
Radiator Cap
Radiator Coolant Hose
Radiator Cooling Unit Holder
Radiator Drain Plug
Radiator Mount Kit
Serpentine Belt
Image
Product
Price
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .807
- 20
- Outside Circumference:
- 2428
- 95.585
- OE Comparison Rating: Oe Performance
- Washer Pump Included: Epdm
- Cross Section Designation: K
- Effective Length:
- 2414
- 95.02
- Rib Quantity: 6
- Cord Material: Polyester
- Top Width:
This Part Fits the Following OEM/Substitute Numbers:
0099971692, 0109975892, 0109978192, 0119974792, 059903137AG, 06004122, 06E903137A, 06E903137J, 10229101, 12550111, 12557719, 12559312, 12569434, 12576747, 12636138, 12636139, 141-1466, 146-062415...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 1991 - Mercedes-Benz 190E | L | 2599 | GAS | 6 Cyl 2.6L | - |
- 17in. High Output Single RAD Pusher/Puller Fan with Standard Mount Kit
- w/Standard Mount Kit; 23.5/17.4 Amp Draw High/Low; 16-7/8 in. Width; 16-7/8 in. Height; 2-5/8 in. Depth; 8-7/8 in. x 15-5/8 in. Mounting; Single
- 17in. High Output Electric Fan; Std Kit
- Radiator Pusher/Puller Fan
- Product Attributes:
- Diameter (in.): 17.000 In.
-
Features:
- Mounts As Pusher Or Puller w/out Flipping Blade
- State-Of-The-Art Symmetrical Design
- High Output 265 Watt 2-Speed Motor
- 2400 CFM On High Speed/1800 CFM On Low Speed
- Our most popular, this 17 in. High Output Single RAD fan is a self-shrouded, symmetrical design with four molded mounting points. Motivated by a 2-speed 265 watt Bosch motor driving 11 patented skewed blades, it can be used as a pusher or puller fan by simply flipping brackets without changing direction of the unit. Moves up to 2400 CFM while drawing up to 23.5 amps.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1991 - Mercedes-Benz 190E | 2.3 |
- 16in. Tornado Electric Puller Fan; Standard Mounting Kit
- 2175 CFM; 16 in. Fan Size; 3/4-16 in. Width; 14-1/2 in. x 9-3/4 in. Mounting; 15-3/4 in. Height; 1-3/4 in. Depth; 18.4 Amp Draw
- 16in. Tornado Electric Fan; Standard Kit
- Tornado Electric Puller Fan
- Product Attributes:
- Diameter (in.): 16.000 In.
-
Features:
- Reliable/Efficient/High Torque Motors
- 2175 CFM
- Reversible Design/Can Be Used As Pusher Or Puller
- Includes Nylon Mounting Kit
- Our top of the line 16 in. Tornado fan uses 8 skewed blades, producing a healthy 2175 CFM at 0 static pressure, drawing only 18.4 amps from its quiet, high torque 225 watt motor. Includes mounting kit and illustrated installation instructions.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1991 - Mercedes-Benz 190E | 2.3 |
- Adjustable Electric Fan Controller; 3/8in. NPT Thread In Probe
- Adjustable; w/3/8 in. NPT Thread In Probe; Maximum Draw Of 25 Amps
- Adjustable turn-on temperature from 150-240deg.F; Turn-off temperature is preset at 10deg.F below turn-on temperature; Thread in 3/8in. NPT probe; Heavy duty 40/60 amp relay maximum 25 amp continuous draw; AC override circuit included
- Electric Fan Controller
-
Features:
- Adjustable Turn-On Temperature From 150 To 240 Degrees Fahrenheit
- 10 Degrees Lower Turn-Off Temperature Than Turn-On Temperature
- Thread in 3/8 in. NPT Temperature Sensor
- Heavy Duty 40/60 Amp Relay
- Includes AC Override Circuit
- Ground Circuit Relay
- Replacement 3/8 in. NPT Sensor Part Number 16750
- This newly redesigned adjustable electric fan control kit is designed to activate up to 2 fans with a total maximum draw of 25 amps. Includes a water jacket 3/8 in. NPT thread-in probe, relay wire harness and electrical connectors for an easy installation. A/C override circuit included. Adjustable fan controller turn-on range from 150°F - 240°F, and turn-off preset at 10°F lower than turn-on.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1991 - Mercedes-Benz 190E | 2.3 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Behr
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1991 - Mercedes-Benz 190E | L | 2599 | 6 Cyl 2.6L | - |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Vernet
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1991 - Mercedes-Benz 190E | L | 2599 | 6 Cyl 2.6L | - |
- 95 In. Belt
- Product Attributes:
- Cross Section: K-section
- Top Width: .82
- Rib Profile: Straight Rib
- Outside Circumference:
- 2429.26
- 95.64
- Rib Depth: Standard
- Standards: Sae J1459, Sae J2432
- Effective Length:
- 2415.04
- 95.08
- Minimum Operating Temperature:
- -42.7
- -45
- 381: 6
- Maximum Operating Temperature:
- 100
- 212
This Part Fits the Following OEM/Substitute Numbers:
06004122, 06E.903.137A, 06E.903.137J, 10229101, 12550111, 12557719, 12564761, 12569350, 12569434, 12576453, 12576747, 12636138, 12636139, 12637200, 146-062415, 25-060950, 25-060952, 25-76095...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1991 - Mercedes-Benz 190E | L | 2599 | Main Drive | 6 Cyl 2.6L | - |
- Radiator cap
- Relief pressure 20 lb
- Standard
- Product Attributes:
- Valve OD: 1.54 In
- Cap Depth: 1.18
- Filler Neck Outside Diameter: 2.13
- Lever Type:
- No
- Standard
- Coolant Recovery System: Open & Closed System
- Quick Pressure Release: No
- Filler Neck Height: 0.75
- Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
This Part Fits the Following OEM/Substitute Numbers:
10235, 10235ST, 10391, 12R11, 1678-44402, 17020, 31522, 380177, 7020, 703-2465, 902-5202, 9T20, DLR14713, DLR14716, P7020, T20
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1991 - Mercedes-Benz 190E | L | 2299 | 4 Cyl 2.3L | - |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .807
- 20
- Outside Circumference:
- 1996
- 78.586
- OE Comparison Rating: Oe Performance
- Washer Pump Included: Epdm
- Cross Section Designation: K
- Effective Length:
- 1982
- 78.02
- Rib Quantity: 6
- Cord Material: Polyester
- Top Width:
This Part Fits the Following OEM/Substitute Numbers:
0079978092, 0089927392, 0089977392, 0130363001, 1029970492, 12605208, 12653318, 1342417, 141-1369, 146-061980, 205872, 23780AA010, 23780AA140, 24441692, 25-060780, 25-71981, 276788, 406-0780...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 1991 - Mercedes-Benz 190E | L | 2299 | GAS | 4 Cyl 2.3L | - |
- Thermostat-192 Degrees
- Temperature 192F OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.64
- Flange Thickness: 0.05 In
- Bypass Diameter: 1.69 In
- Jiggle Pin Weep Hole: Yes
- Bypass Length: 0.97 In
- Temperature (Degree): 192
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
1102000515, 13649, 1601-230892, 1L2Z8575AA, 248-192JV, 24893, 280, 2L2Z8575AA, 33079, 33079S, 33972, 33979, 33980, 3529, 3529-TS, 35649, 48019, 48089...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1991 - Mercedes-Benz 190E | L | 2299 | 4 Cyl 2.3L | - |
Showing 1 - 10 of 115 products
Loading...