Image
Product
Price
- Z16 EVO CERAMIC PAD
- Z16 EVOLUTION CERAMIC BRAKE PADS
- Z16 Evolution Premium Ceramic Brake Pads
- Product Attributes:
- Slotted: Yes
- Inner Pad Overall Thickness: 15.80mm
- Grade Type: Performance
- Mounting Hardware Included: No
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Cadmium; Chromium (hexavalent Compounds); Lead; Nickel And Antimony Trioxide; Which Are Known To The State Of California To Cause Cancer; And Arsenic; Cadmium And Chromium (hexavalent Co
- Outer Pad Overall Thickness: 15.80mm
- Friction Surface Scorched: Yes
- Brake Lubricant Included: No
- Pad Shims Included: Yes
- Chamfered Edges: Yes
- Friction Material Composition: Ceramic
- Pad Wear Sensor Type: Mechanical
- Pad Wear Sensor Included: Yes
-
Features:
- OEM Positive Mold Technology For Consistent Fade Free Performance
- Thermal Scorched For Fast Break-In
- Positive Mold Technology
- Low Dust Formulation
- Shims Made w/Dual Rubber Layers To Eliminate Noise
- The Power Stop Z16 Evolution ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z16 pads maintain consistent wear and performance while ensuring a fast break-in. The Z16 Evolution ceramic brake pads are an affordable stock replacement for all vehicles.
- They are sold as a set and only quantity 1 is required for both wheels
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Mazda 3 Sport | Front |
- R-Line
- Product Attributes:
- Overall Height:
- 1.535
- 39.000
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.524
- 13.300
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Harmonize Code: 8708.30.5030
- Inside Diameter:
- 174.500
- 6.870
- Center Hole Diameter:
- 2.677
- 68.000
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Solid
- Nominal Thickness:
- 0.354
- 9.000
- Surface Type: Smooth
- Outside Diameter:
- 10.413
- 264.500
- Mounting Bolt Hole Quantity: 5
- Discard Thickness:
- 0.276
- 7.000
- UNSPSC Code: 25171715
- Mounting Bolt Hole Circle Diameter:
- 114.300
- 4.500
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
083-3586, 120.45081, 120.45093, 121.45081, 121.45093, 126.45081SL, 126.45081SR, 126.45093SL, 126.45093SR, 127.45081L, 127.45081R, 128.45081L, 128.45081R, 14-610005, 320.45081, 320.45093, 474743, 604-80049...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2022 - Mazda CX-30 | Rear | 2.5 S | AWD |
- R-Line; Ceramic
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Silica, Which Is Known To The State Of California To Cause Cancer, And Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go T
- Mounting Hardware Included: Yes
- Friction Material Composition: Ceramic
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
103.18460, 10318460, 105.18460, 10518460, 17-1846, 171846, 301.18460, 30118460, kay02648z, KBY62648Z, OEX1846, QC1846, ZD1846
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Mazda CX-5 | Rear |
- R-Line
- Product Attributes:
- Overall Height:
- 1.557
- 39.550
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 114.300
- 4.500
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Harmonize Code: 8708.30.5030
- Inside Diameter:
- 212.350
- 8.360
- Center Hole Diameter:
- 2.677
- 68.000
- Nominal Thickness:
- 0.394
- 10.000
- Surface Type: Smooth
- Outside Diameter:
- 11.918
- 302.700
- Discard Thickness:
- 0.315
- 8.000
- UNSPSC Code: 25171715
- Mounting Bolt Hole Circle Diameter:
- 114.300
- 4.500
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
120.45083, 120.45083CRY, 120.45084, 120.45084CRY, 121.45083, 121.45084, 126.45083SL, 126.45083SR, 126.45084SL, 126.45084SR, 127.45083L, 127.45083R, 127.45084L, 127.45084R, 128.45083L, 128.45083R, 128.45084L, 128.45084R...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Mazda CX-5 | Rear |
- R-Line
- Product Attributes:
- Salability Restrictions: No
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Harmonize Code: 8708.30.5030
- UNSPSC Code: 25171715
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
BEET33251
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2022 - Mazda 3 | Front | AWD |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Japan Built
- 2 Per Wheel
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2022 - Mazda 3 | 2.5 S |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Jaban Built
- 2 Per Wheel
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2022 - Mazda 3 | 2.5 Turbo Premium Plus |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- 2 Per Wheel
Additional Fitment Information:
| Vehicle |
|---|
| 2022 - Mazda MX-30 EV |
- R-Line; Ceramic
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Silica, Which Is Known To The State Of California To Cause Cancer, And Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go T
- Inner Pad Width: 5.585
- Outer Pad Width: 5.585
- FMSI Number: D1623-8836
- Inner Pad Overall Thickness: 0.625
- Mounting Hardware Included: Yes
- Friction Material Composition: Ceramic
- Outer Pad Overall Thickness: 0.625
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
105.16230, 16-1623, 17-1623, 171623, 301.16230, 308.16230, 500.16230, BC1623, CFC1623, D1623C, K0Y13323Z, K0Y13328Z, K0Y13328ZA, KDY93328Z, KGY03328Z, OEX1623, QC1623, SBC1623...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Aspiration |
|---|---|---|
| 2022 - Mazda CX-5 | Front | Naturally Aspirated |
- Mexico Built
- R-Line
- Product Attributes:
- Overall Height:
- 2.028
- 51.500
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.524
- 13.300
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Harmonize Code: 8708.30.5030
- Inside Diameter:
- 180.200
- 7.094
- Center Hole Diameter:
- 2.677
- 68.000
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Vented
- Nominal Thickness:
- 1.098
- 27.900
- Surface Type: Smooth
- Outside Diameter:
- 11.677
- 296.600
- Mounting Bolt Hole Quantity: 5
- Discard Thickness:
- 0.984
- 25.000
- UNSPSC Code: 25171715
- Mounting Bolt Hole Circle Diameter:
- 114.300
- 4.500
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
120.45094, 121.45094, 126.45094SL, 126.45094SR, 127.45094L, 127.45094R, 128.45094L, 128.45094R, 320.45094, 574882, 600-80076, 604-80076, 77112DG, 77112DL, 922004RGS, BD180685E, GBFT33251, GBFT33251A...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2022 - Mazda 3 | Front | FWD |
Showing 1 - 10 of 347 products
Loading...