2009 Ford Explorer Driveline and Axles Parts
Choose your Part Name for your 2009 Ford Explorer
Axle Differential Bearing
Axle Differential Bearing Race
Axle Nut
CV Axle Assembly
CV Axle Shaft Seal
CV Joint Boot Kit
Differential
Differential Carrier
Differential Carrier Bearing
Differential Carrier Bearing Race
Differential Cover
Differential Cover Bolt
Differential Cover Seal
Differential End Yoke
Differential Pinion Seal
Differential Ring and Pinion
Differential Side Bearing Spacer
Drive Axle Shaft Bearing
Drive Axle Shaft Seal
Spider Gear
Spindle Nut
Universal Joint
Universal Joint Strap Kit
Wheel Bearing
Wheel Bearing Snap Ring
Wheel Bearing and Hub Assembly
Wheel Bearing and Race Set
Wheel Hub
Wheel Hub Repair Kit
Image
Product
Price
- Uni-Fit C.V. Joint Boot Kit Outer greater than 3.58 In. Diameter
- Uni-Fit Joint Diameter 3.44 In.
- Product Attributes:
- Shaft End Inside Diameter: 0.98
- Boot Color: Black
- Package Contents: 1 Cv Joint Boot; 1 Cv Joint Grease Pack; 2 Clamps
- Split Or Solid Type: Solid
- Boot Material: Neoprene
- Rib Quantity: 6
- Vented Boot: No
- Joint End Inside Diameter: 3.44
-
Features:
- Direct replacement - this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself
- Ideal solution - this kit is a reliable replacement for original components that have failed due to wear
- Durable construction - this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2009 - Ford Explorer | Rear Outer | XLT |
- Uni-Fit C.V. Joint Boot Kit Outer greater than 3.58 In. Diameter
- Uni-Fit Joint Diameter 3.44 In.
- Product Attributes:
- Shaft End Inside Diameter: 0.98
- Boot Color: Black
- Package Contents: 1 Cv Joint Boot; 1 Cv Joint Grease Pack; 2 Clamps
- Split Or Solid Type: Solid
- Boot Material: Neoprene
- Rib Quantity: 6
- Vented Boot: No
- Joint End Inside Diameter: 3.44
-
Features:
- Direct replacement - this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself
- Ideal solution - this kit is a reliable replacement for original components that have failed due to wear
- Durable construction - this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.
This Part Fits the Following OEM/Substitute Numbers:
103-2623, 1032281, 1032288, 1032623, 1032640, 1032743, 2423, 2456, 2460, 2482, 2487, 4433, 4436, 4450, 4468, 4483, 4496, 5400...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2009 - Ford Explorer | Front Outer |
- Uni-Fit C.V. Joint Boot Kit Outer greater than 3.58 In. Diameter
- Uni-Fit Joint Diameter 3.44 In.
- Product Attributes:
- Shaft End Inside Diameter: 0.98
- Boot Color: Black
- Package Contents: 1 Cv Joint Boot; 1 Cv Joint Grease Pack; 2 Clamps
- Split Or Solid Type: Solid
- Boot Material: Neoprene
- Rib Quantity: 6
- Vented Boot: No
- Joint End Inside Diameter: 3.44
-
Features:
- Direct replacement - this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself
- Ideal solution - this kit is a reliable replacement for original components that have failed due to wear
- Durable construction - this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2009 - Ford Explorer | Rear Inner | XLT |
- Uni-Fit C.V. Joint Boot Kit Inner Greater Than 3.35 In. Diameter
- Uni-Fit Joint Diameter 3.50 In.
- Product Attributes:
- Shaft End Inside Diameter: 1.685
- Boot Color: Grey
- Package Contents: 1 Cv Joint Boot; 1 Cv Joint Grease Pack; 2 Clamps
- Split Or Solid Type: Solid
- Boot Material: Silicone
- Rib Quantity: 6
- Vented Boot: No
- Joint End Inside Diameter: 3.5
-
Features:
- Direct replacement - this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself
- Ideal solution - this kit is a reliable replacement for original components that have failed due to wear
- Durable construction - this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.
This Part Fits the Following OEM/Substitute Numbers:
103-2604, 1032282, 1032465, 1032604, 2406, 2422, 2423, 2460, 2482, 2487, 4404, 4436, 4492, 4496, 5400, 5404, 5405, 5408...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2009 - Ford Explorer | Front Inner |
- Differential Cover; 'Perfect Launch' Model; Fits Ford 8.8; Aluminum; Black
- Aluminum; Black
- Differential Cover; 'Perfect Launch' Model; Fits Ford 8.8 Rear Ends; Made From High-Quality Aluminum; Black Finish; Features 2 Bolts To Stabilize Bearing Main Caps, Two Magnetic Drain Plugs and Mounting Bolts. Sold Individually
- Product Attributes:
- Emblem: Perfect Launch Emblem
- Category: Differential Cover
- Feature/Benefit: Reinforced Lightweight Aluminum Rear End Covers Designed To Strengthen The Rear Housing Case In Heavy Torque Situations.
- Applications: Ford 8.8
- Part Type: Differential Cover
- Tool Type: Piston Installation Tools
- Reinforced lightweight aluminum rear end covers designed to strengthen the rear housing case in heavy torque situations. The PERFECT LAUNCH logo is prominently displayed on a precision milled surface. Each cover includes two bolts to stabilize bearing main caps, fluid capacity and magnetic drain plugs, and mounting bolts. All covers have a black painted finish.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Engine VIN | Aspiration | CID |
|---|---|---|---|---|---|---|---|
| 2009 - Ford Explorer | V | - | 8 Cyl 4.6L | XLT | 8 | Naturally Aspirated | 281 |
- Non-Greaseable Super Strength Universal Joint
- 1.188 (in) Bearing Caps with Steel Driveshaft 0.059 (in) Ring Thickness Non-Greasable Super Strength U-Joint
- MOOG Non-Greaseable Super Strength 231 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.188
- 30.1
- Bearing Diameter A - mm: 30.2
- Length Axis 1:
- 3.625
- 92.1
- Length Axis 2:
- 3.625
- 92.1
- Length A - Inch: 3.625
- OE Series: Spicer 1350 (spl30)
- Length A - mm: 92.1
- Bearing Diameter A - Inch: 1.188
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.188
- 30.2
- Bearing Diameter B - Inch: 1.188
- Bearing Type A: Round Plain
- Greaseable: No
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.625
- Length B - mm: 92.1
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 30.1
- Lubricateable: No
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
2-0053BF, 20053G, 20054P, 210-0447, 282, 45U0123, 5-282X, 5-471X, DT447, G5-447X, U178HP
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2009 - Ford Explorer | Rear Driveshaft at Transmission | 4WD |
- Greaseable Super Strength Universal Joint
- with Lube Fitting in Body Greasable Super Strength U-Joint with Lube Fitting in Body
- MOOG Greaseable Super Strength 280 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.063
- 27.0
- Bearing Diameter A - mm: 27.0
- Length Axis 1:
- 3.22
- 81.7
- Length Axis 2:
- 3.22
- 81.7
- Length A - Inch: 3.22
- OE Series: Spicer 1310
- Length A - mm: 81.7
- Bearing Diameter A - Inch: 1.063
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.063
- 27.0
- Bearing Diameter B - Inch: 1.063
- Bearing Type A: Round Plain
- Greaseable: Yes
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.22
- Length B - mm: 81.7
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 27.0
- Lube Fitting Location: Flush-type Lube Fitting In Bearing
- Lubricateable: Yes
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- GREASABLE DESIGN -- Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
2154153, 45U0111
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2009 - Ford Explorer | Front Driveshaft at Front Axle | 4WD |
- Non-Greaseable Super Strength Universal Joint
- with Lube Fitting in Body Non-Greasable Super Strength U-Joint
- MOOG Non-Greaseable Super Strength 269 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.063
- 27.0
- Bearing Diameter A - mm: 27.0
- Length Axis 1:
- 3.22
- 81.7
- Length Axis 2:
- 3.22
- 81.7
- Length A - Inch: 3.22
- OE Series: Spicer 1310
- Length A - mm: 81.7
- Bearing Diameter A - Inch: 1.063
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.063
- 27.0
- Bearing Diameter B - Inch: 1.063
- Bearing Type A: Round Plain
- Greaseable: No
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.22
- Length B - mm: 81.7
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 27.0
- Lubricateable: No
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
1-0153BF, 10153G, 20049P, 45U0145, 5-529X, 529, DT467, G5-467X, U153HP
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2009 - Ford Explorer | Front Driveshaft at Front Axle | 4WD |
- Grease/Oil Seal
- Vent holes allow lubricants to flow freely around the seal lip - cooling seal components and removing heat build-up
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2009 - Ford Explorer | Front Outer | AWD |
- Grease/Oil Seal
- Dana/Spicer Super 30 Axle
- Vent holes allow lubricants to flow freely around the seal lip - cooling seal components and removing heat build-up
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2009 - Ford Explorer | Front | AWD |
Showing 1 - 10 of 146 products
Loading...