2021 Ram Driveline and Axles Parts
Choose a Model for your 2021 Ram
Image
Product
Price
- Wheel Bearing and Hub Assembly
- MOOG 515151 Hub Assembly
- Product Attributes:
- Flange Bolt Hole Quantity: 3
- Anti Lock Brake Sensor Included: Yes
- Brake Pilot Diameter: 78.400
- Flange Offset: 46.800
- Bolt Circle Diameter:
- 139.700
- 5.500
- Hub Pilot Diameter: 90.000
- Wheel Pilot Diameter: 77.700
- Spline Quantity: 33
- Flange Diameter: 183.000
- Wheel Stud Quantity: 5
-
Features:
- RELIABLE PERFORMANCE -- Precise roll-form design ensures consistent and optimal factory-installed preload to minimize excessive noise and wear
- EXTENDED SERVICE LIFE -- Application-specific advanced raceway design reduces stress, rotation and heat on components
- KEEPS WATER AND DIRT OUT -- Quad lip seal design inhibits damage by keeping moisture and other contaminants out
- EASY TO INSTALL -- Engineered and designed for fast, hassle-free installation
- CORROSION PROTECTION -- Coated wheel studs resist corrosion and rust for easier removal and proper torqueing
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG hub assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
4779829AD, 5154171AA, 68230055AB, 68267298AA, BR930858, HA590492
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Ram 1500 Classic | Front |
- Rear; w/2 Piece Rear Drive Shaft
- Drive Shaft Boot Kit; Rear; w/2 Piece Rear Drive Shaft;
- Drive Shaft Boot Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Drive Shaft Boot Kit
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Ram 1500 |
- Right Outer Intermediate Axle Shaft
- Intermediate w/Sales Code DMD (3.55 Axle Ratio) w/Dana Axle
- Product Attributes:
- Dynamic Damper Attached: No
- Inboard Flange Mount Hole Quantity: 0
- Compressed Length: 11.5
- Mounting Hardware Included: No
- Package Contents: Axle Shaft; Retainer Clip; O-ring; Dust Shield; Bearings; Axle Shaft Seal
- Extended Length: 11.5
- Outside Diameter: 1.21
- Inboard End Type: Splined
- Outboard End Spline Quantity: 29
- Outboard Flange Mount Hole Quantity: 0
- Outboard End Type: Splined
-
Features:
- Ideal replacement - this intermediate shaft directly replaces the original equipment shaft on specified vehicle years, makes and models
- Durable construction - this intermediate shaft is pre-assembled using quality materials and components to ensure easy installation and reliable service
- Cost-effective solution - offers original equipment quality at competitive price
- Quality tested - this part has undergone try-on testing to ensure a quality fit and long service life
- This replacement CV intermediate shaft is engineered to match the fit and function of the original shaft on specified vehicles. Using quality materials and components, this intermediate shaft is pre-assembled and ready to install.
This Part Fits the Following OEM/Substitute Numbers:
68257421AG
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2021 - Ram 1500 Classic | Front Right Outer | 4WD |
- Front Axle Shaft Replacement Kit
- w/Sales Code DMD (3.55 Axle Ratio) Includes Interim Shafts And 4WD Collar
- Product Attributes:
- Axle Type: Solid Shaft Axle
- Differential Case Design Type: Ifs
- CV Joints Included: No
- Retainer Clips Included: Yes
- Minimum Length: 203 Mm
- Axle Shaft Seal Included: Yes
- Package Contents: Inner Axle Shaft; Outer Axle Shaft; 4wd Collar; Bearings; Axle Seal; O-ring; Retainer Clips; Dust Shield
- Wheel Bolt Pattern Size: 5 X 5.5
- Inboard Spline Quantity: 37
- Shaft Material: Carbon Steel
- ABS Tone Ring Installed: No
- ABS Sensor Ring Included: No
- ABS Tone Ring Included: No
- Axle Nut Included: No
- Rust Resistant Coating: No
- Outboard Spline Quantity: 29
- Brake Hardware Included: No
- Diameter: 30.8 Mm
- Hole Quantity: 0
- Wheel Lug Quantity: 5
- Shaft Length: 470
- Shaft Diameter: 30.8
-
Features:
- Direct replacement - this axle shaft replaces the original equipment on specific vehicle years, makes and models
- Complete kit - each shaft includes critical installation hardware and components needed for specific vehicle applications
- Durable construction - designed to rigorous standards and tested to ensure performance
- Trustworthy solution - backed by team of engineers and quality control specialists in the United States
- Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2021 - Ram 1500 Classic | Front | 4WD |
- Right Inner Intermediate Axle Shaft
- Intermediate w/Sales Code DMD (3.55 Axle Ratio) w/Dana Axle
- Product Attributes:
- Dynamic Damper Attached: No
- Inboard Flange Mount Hole Quantity: 0
- Compressed Length: 7.9
- Mounting Hardware Included: No
- Package Contents: Axle Shaft; Retainer Clip; Bearing
- Extended Length: 7.9
- Outside Diameter: 1.21
- Inboard End Spline Quantity: 37
- Inboard End Type: Splined
- Outboard Flange Mount Hole Quantity: 0
- Outboard End Type: Splined
-
Features:
- Ideal replacement - this intermediate shaft directly replaces the original equipment shaft on specified vehicle years, makes and models
- Durable construction - this intermediate shaft is pre-assembled using quality materials and components to ensure easy installation and reliable service
- Cost-effective solution - offers original equipment quality at competitive price
- Quality tested - this part has undergone try-on testing to ensure a quality fit and long service life
- This replacement CV intermediate shaft is engineered to match the fit and function of the original shaft on specified vehicles. Using quality materials and components, this intermediate shaft is pre-assembled and ready to install.
This Part Fits the Following OEM/Substitute Numbers:
68257421AG
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2021 - Ram 1500 Classic | Front Right Inner | 4WD |
- Differential Cover Gasket
- with 12 Bolt Holes with 9.25in Ring Gear ; Chrysler
- FEL-PRO RDS 55073 Differential Cover Gasket
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
36013, 53007762, DS14213, P29352, P29352TC
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Ram 1500 Classic | Rear |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ram 3500 | Front | Big Horn |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ram 2500 | Front | Laramie |
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2021 - Ram 1500 | V | - | Rear | MILD HYBRID EV-GAS (MHEV) | 8 Cyl 5.7L | Lone Star | 345 |
- 4WD Front Differential Actuator
- Product Attributes:
- Package Contents: Actuator
- Connector/Terminal Configuration: Blade
- Actuator Design: Electronic
-
Features:
- Ideal replacement - this differential lock actuator directly replaces the original equipment part on specific vehicle years, makes and models
- Effective fix - installation addresses inoperative differential lock caused by failed original actuator
- Cost-effective solution - offers original equipment fit and function at a competitive price
- Trustworthy quality - backed by a team of designers and engineers in the United States
- This differential lock actuator directly replaces the original equipment part on specific vehicle applications. It is reverse engineered to reliably restore proper functionality.
This Part Fits the Following OEM/Substitute Numbers:
1S12657, 52114387AA, 52114387AB, 52114387AC, 52114387AD, 52114387AE, 52114387AF, 68399418AA, TCA-81
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2021 - Ram 1500 Classic | Front | 4WD |
Showing 1 - 10 of 88 products
Loading...