1986 Mercury Marquis Engine Parts


Showing 1 - 10 of 56 products
Image
SKU
Product
Rating
Price

Sealed Power
  • Engine Valve Lifter
  • Box of 1; Hydraulic Lifter
  • Sealed Power HT-900 Lifter (Pack of 4)
  • Product Attributes:
    • Design Feature 1: Hydraulic
  • Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today's modern engines.
  • Suggested Purchase Quantity: 16
    • Most jobs typically require 16 of this item.

This Part Fits the Following OEM/Substitute Numbers:
213-1667, 36900, C20Z6500D, CE2DZ6500A, D0AE6500E, D1AZ6500A, D8AE6500A, D9HZ6500A, F0DE6500AA, F1DZ-6500A, H900, HA900, HL1900, HL1900P, HL44, HL69, HL900, J900...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
1986 - Mercury Marquis V - 6 Cyl 3.8L 232

Fram
  • FRAM, PH8A, Oil Filter
  • Spin-on Oil Filter
  • Extra Guard
  • Product Attributes:
    • Burst Pressure: 230.000
    • Inside Thread Diameter: 3/4-16
    • Bypass Relief Valve Setting: 12.000
    • Marine Approved: No
    • Outside Diameter: 3.797
    • Non Slip Grip: Yes
    • Bypass Relief Valve: Yes
    • Filter Media Material: Cellulose/synthetic Blend
    • Anti-Drain Back Valve: Yes
    • Micron Rating: 8.000
    • Torque Nut: No
  • FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.

This Part Fits the Following OEM/Substitute Numbers:
3645, 3I-1412, 6018, F76006, FF833, TP1049

Additional Fitment Information:
Vehicle Block CC Engine CID
1986 - Mercury Marquis L - 4 Cyl 2.3L 140

Cometic Gasket
  • Ford 2.5/3.0/3.1L Essex V6; Cosworth GA Cylinder Head Gasket
  • 0.040 in. Multi-Layer Steel; 95.5mm Bore
  • Ford 2.5/3.0/3.1L Essex V6; Cosworth GA .040in. MLS Cylinder Head Gasket; 95.5mm Bore
  • Cylinder Head Gasket
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
    • Engine Make/Size: Ford Essex V6
  • Features:
    • Cylinder Head Gasket
    • Embossed Outer Layers Coated w/Viton Rubber Material
    • Designed To Meet The Demands Of A Variety Of Harsh Sealing Cond.
  • The Cometic MLS gasket is comprised of three to five layers of stainless steel. Cometic uses stainless steel for increased strength, its ability to rebound and resist corrosion. The outer layers of the gasket are embossed and coated on both sides with a Viton rubber material designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 250°C or 482°F.

Additional Fitment Information:
Vehicle Block CC Engine CID
1986 - Mercury Marquis V - 6 Cyl 3.8L 232

Cometic Gasket
  • Ford 2.5/3.0/3.1L Essex V6; Cosworth GA Cylinder Head Gasket
  • 0.040 in. Multi-Layer Steel; 95.5mm Bore
  • Ford 2.5/3.0/3.1L Essex V6; Cosworth GA .040in. MLS Cylinder Head Gasket; 95.5mm Bore
  • Cylinder Head Gasket
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
    • Engine Make/Size: Ford Essex V6
  • Features:
    • Cylinder Head Gasket
    • Embossed Outer Layers Coated w/Viton Rubber Material
    • Designed To Meet The Demands Of A Variety Of Harsh Sealing Cond.
  • The Cometic MLS gasket is comprised of three to five layers of stainless steel. Cometic uses stainless steel for increased strength, its ability to rebound and resist corrosion. The outer layers of the gasket are embossed and coated on both sides with a Viton rubber material designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 250°C or 482°F.

Additional Fitment Information:
Vehicle Block CC Engine CID
1986 - Mercury Marquis V - 6 Cyl 3.8L 232

Wix
  • WIX Spin-On Lube Filter
  • Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
  • Product Attributes:
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 3.661
    • Capacity: 0.00
    • Duty Type: Ld
    • Flow Rate: 7-9 Gpm
    • Style: Spin-on Lube Filter
    • Class: A
    • Outlet: 0.00
    • Burst Pressure: 290
    • Bypass Relief Valve Setting: 8-11
    • Media Material: Synthetic
    • Anti-Drain Back Valve: Yes
    • Inlet: 0.00
  • WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
  • This item must be purchased in quantities of 12

This Part Fits the Following OEM/Substitute Numbers:
0 451 104 001, 0 451 104 063, 0 451 203 001, 0 451 203 001-850, 0 451 203 153, 0 451 203 176, 0 986 452 001, 0 986 452 002, 0 986 AF0 124, 0 986 AF1 077, 00 012 280 22, 00 03 141 914, 00 03 563 591, 00 050 426 21, 00 052 212 72, 00 052 213 13, 00 061 604 48, 00 750 614 09...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine CID
1986 - Mercury Marquis L - Canada 4 Cyl 2.3L 140

Wix
  • WIX Spin-On Lube Filter
  • Also Available In Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
  • Product Attributes:
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 3.661
    • Duty Type: Ld
    • Micron: 21.00
    • Flow Rate: 7-9 Gpm
    • Style: Spin-on Lube Filter
    • Class: A
    • Outlet: 0.00
    • Burst Pressure: 290
    • BetaRatio: 2/20=6/20
    • Bypass Relief Valve Setting: 8-11
    • Media Material: Enhanced Cellulose
    • Anti-Drain Back Valve: Yes
    • Inlet: 0.00
  • WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)

This Part Fits the Following OEM/Substitute Numbers:
0 451 104 001, 0 451 104 003, 0 451 203 001-850, 0 451 203 005, 0 451 203 153, 0 986 452 001, 0 986 452 002, 0 986 AF0 124, 0 986 AF1 077, 00 012 280 22, 00 050 426 21, 00 052 212 72, 00 052 213 13, 00 061 604 48, 00 750 614 09, 00 750 614 11, 00 750 650 49, 00013505015...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine CID
1986 - Mercury Marquis L - Canada 4 Cyl 2.3L 140

Dorman
  • Oil Drain Plug Pilot Point M14-1.50, Head Size 16Mm
  • 16 mm Head Package Quantity: 5 Dorman - AutoGrade - Boxed Packaging Type: Box Thread Pitch: 1.5 mm
  • Product Attributes:
    • Thread Size: M14-1.50
    • Threads Per Inch: 0
    • SAE or Metric: Metric
    • Package Contents: 5 Oil Drain Plugs
    • Head Size (SAE/Metric): 16 Mm
    • Length: 0.857
    • Magnetic: No
    • Thread Type: Fine
    • Oversized Thread: No
    • Bolt Grade: 5.8
    • Special Tool Required: No
    • Gasket Type: Gasket
    • Socket Points: 6
    • Head Drive Type: Hex
    • Describe Type: Pilot Point
    • Program: Universal Oil
    • Drain Method: Conventional
  • Features:
    • Ideal replacement - this engine oil drain plug matches the fit and function of the original drain plug
    • Durable construction - this replacement drain plug is made of corrosion-resistant materials for reliable service
    • Cost-effective solution - offers original equipment performance at competitive price
    • Quality tested - this part has undergone try-on testing to ensure a quality seal
  • This replacement engine oil drain plug is a direct replacement for a damaged or worn original equipment drain plug, precisely matching the thread pitch to ensure a quality seal.

This Part Fits the Following OEM/Substitute Numbers:
0924714027, 0B6S710404A, 1013938, 1027, 113115193, 1151785Z00, 1151786Z00, 1151786Z02, 11569943, 12582347, 17613pk, 2151221000, 2151221010, 2151223000, 2151223001, 215122X000, 263-917, 323276...VIEW MORE

Additional Fitment Information:
Vehicle
1986 - Mercury Marquis

K&N
  • Oil Filter
  • H-5.7 in.; OD-3.65 in.; 3/4 In. - 16UNF-2B Thread; psi Relief Valve 8-11 Pro-Series Oil Filter w/o Wrench Off Nut
  • K/N Performance Silver Oil Filters have been specially designed for professional installers. Their high flow design can help to improve engine performance by reducing oil filter restriction while they provide outstanding filtration.
  • High Flow Oil Filter
  • Product Attributes:
    • Thread Size: .750 In. - 16unf-2b
    • WARNING CA Proposition 65: No
    • Bypass Valve: Yes
    • Style: Canister
    • Item Weight: 1.300 Lbs. (0.6 Kg)
    • Product Box Height: 5.700 In. (145mm)
    • Filter Material: High Flow Premium Media
    • Gasket Material: Nitrile Rubber
    • Product Box Width: 3.810 In. (97 Mm)
    • Package Material: Paperboard
    • Product Box Length: 3.810 In. (97mm)
    • PSI Relief Valve: 8-11
    • Outside Diameter: 3.656 In. (93mm)
    • Removal Nut: No
    • Item Height: 5.719 In. (145mm)
    • Package Type: Box
    • Anti-Drain Back Valve: Yes
  • Features:
    • Designed To Improve Performance
    • Designed For Synthetic/Conventional/Blended Oils
    • Premium Filtration Media For Increased Capacity
    • Helps Improve Engine Performance by Reducing Oil Restriction
  • K&N Performance Silver Oil Filters have been specially designed for professional installers and service providers. Their high flow design can help to improve engine performance by reducing oil filter restriction. Our Performance Silver Oil Filters have a fluted canister shape so they can be removed with a traditional oil filter wrench commonly available to commercial installers. These Performance Silver oil filters provide outstanding filtration and engine protection throughout their service life. They are engineered to handle all grades of synthetic, conventional and blended motor oils. The pleated media provides high capacity making them suitable for extended oil change intervals when used in accordance with the vehicle and motor oil manufacturers recommendation. K&N Performance Silver Oil Filters are available for canister and cartridge type oil filter applications.

This Part Fits the Following OEM/Substitute Numbers:
122P193, 41515, 51515, 51525, 51545, 51622, 51775, AFL1, FL1A, FL1HP, FL281, HD222, HP1, HP3001, L30001, L30119, L30257, L30341...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
1986 - Mercury Marquis L - 4 Cyl 2.3L 140

Fram
  • FRAM, HP1, Oil Filter
  • FRAM HIGH PERFORMANCE High Performance Spin-on Oil Filter
  • Product Attributes:
    • Non Slip Grip: No
    • Torque Nut: No
    • Attachment Type: Spin-on
    • Burst Pressure: 500.000
    • Housing Color: Orange
    • Inside Thread Diameter: 3/4-16
    • Bypass Relief Valve Setting: 22.000
    • Marine Approved: No
    • Outside Diameter: 3.672
    • Bypass Relief Valve: Yes
    • Filter Media Material: Cellulose/synthetic Blend
    • Anti-Drain Back Valve: Yes
  • FRAM Racing® Oil Filters are optimized for both racing and high performance street cars, and are compatible with all oil types. These filters deliver performance-enhancing features to support operating high-performance vehicles with engines put under tremendous pressure. FRAM Racing Oil Filters are compatible with all oil types.

This Part Fits the Following OEM/Substitute Numbers:
3120MP, 33120, 86120MP, BF7613, BF992, FF204

Additional Fitment Information:
Vehicle Block CC Engine CID
1986 - Mercury Marquis L - 4 Cyl 2.3L 140

National Bearing
  • Crankshaft Seal
  • National 2692 Crankshaft Seal
  • Product Attributes:
    • Shaft (Inch): 1.875
    • Width (Inch): 0.528
    • Redicoat: Yes
    • Flanged Outside Diameter (Inch): 3.160
    • Inside Diameter:
      • 1.875
      • 47.630
    • Flanged Outside Diameter (MM): 80.260
    • Helix Type: Clockwise-spiral Lip Design
    • Unit of Dimension: Inch
    • Housing Bore (Inch): 2.561
    • Outside Diameter:
      • 2.565
      • 65.150
    • Outside Diameter (Inch): 2.565
    • Shaft (MM): 47.630
    • Part Description: Oil Seal
  • National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

This Part Fits the Following OEM/Substitute Numbers:
12304224, 18544, 18548, 23615607.5, 2692, 29520, 480185, 480186, 4F2E-6700AA, 61620S, 84694, A46893P, A46893S, B9TE6700A, B9TE6700A1, C0NN6701A, C1AE6700A, C1AE6700A1...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1986 - Mercury Marquis V - Front 6 Cyl 3.8L 232
Showing 1 - 10 of 56 products

Loading...