1989 Buick Skyhawk Engine Parts
Choose your Part Name for your 1989 Buick Skyhawk
Air Charge Temperature Sensor
Engine Crankshaft Repair Sleeve
Engine Crankshaft Seal
Engine Cylinder Head Gasket
Engine Cylinder Head Plug
Engine Oil Drain Plug
Engine Oil Drain Plug Gasket
Engine Oil Filter
Engine Oil Pan Gasket
Engine Oil Pan Gasket Set
Engine Oil Pressure Switch
Engine Timing Chain
Engine Timing Chain Guide
Engine Timing Chain Tensioner
Engine Timing Cover Gasket
Engine Timing Cover Repair Sleeve
Engine Timing Crankshaft Gear
Engine Timing Crankshaft Sprocket
Engine Valve Cover Gasket
Image
Product
Price
- Repair Sleeve
- Use w/installation tool
- FEL-PRO 16202 Repair Sleeve
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
14907, 66597RS, 7426679, A228, A2281, AM228, HB4121, HB4124, TC11236
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1989 - Buick Skyhawk | L | - | 4 Cyl 2.0L | 122 |
- FRAM, PH3980, Oil Filter
- Spin-on Oil Filter Refer to CV Boot bulletin
- Extra Guard
- Product Attributes:
- Gasket Inside Diameter: 2.469
- Non Slip Grip: Yes
- Gasket Thickness: 0.078
- Micron Rating: 8.000
- Torque Nut: No
- Burst Pressure: 310.000
- Gasket Type: Base
- Marine Approved: No
- Outside Diameter: 2.984
- Gasket Outside Diameter: 2.828
- Bypass Relief Valve: No
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
51791EC, 7E-6013, 84182MP, WC19
Additional Fitment Information:
| Vehicle |
|---|
| 1989 - Buick Skyhawk |
- PRO-TEC Spin-On Lube Filter
- Oil Drain Intervals of up to 5000 miles
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.921
- Capacity: 0.00
- Burst Pressure: 325
- Duty Type: Ld
- Bypass Relief Valve Setting: None
- Flow Rate: 7-9 Gpm
- Style: Spin-on Lube Filter
- Media Material: Synthetic
- Class: B
- Anti-Drain Back Valve: Yes
- Protec Oil Filters provide good engine protection using conventional motor oil for everyday normal driving conditions such as city and highway travel. Recommended for traditional oil and filter change intervals, typically 3,000 to 5,000 miles. Laboratory Test Performance per ISO 454812 13 grams dirt (Protec 101), 95% efficient at 29 microns (Based on Protec 164, 115, 101)
This Part Fits the Following OEM/Substitute Numbers:
1036, 120, 1717106, 21036, 21036MP, 2224516, 234, 31036, 393A, 42051, 5001202786, 51036, 51036XP, 61036, 61036BP, 618-51036, 8-51036, 85036...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1989 - Buick Skyhawk | L | - | Canada | 4 Cyl 2.0L | 122 |
- PRO-TEC Spin-On Lube Filter
- Master Pack Version; Oil Drain Intervals of up to 5000 miles
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.921
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 7-9 Gpm
- Style: Spin-on Lube Filter
- Class: A
- Burst Pressure: 325
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: None
- Media Material: Enhanced Cellulose
- Anti-Drain Back Valve: Yes
- Protec Oil Filters provide good engine protection using conventional motor oil for everyday normal driving conditions such as city and highway travel. Recommended for traditional oil and filter change intervals, typically 3,000 to 5,000 miles. Laboratory Test Performance per ISO 454812 13 grams dirt (Protec 101), 95% efficient at 29 microns (Based on Protec 164, 115, 101)
- This item must be purchased in quantities of 12
This Part Fits the Following OEM/Substitute Numbers:
1036, 1036MP, 120, 1717106, 21036, 21036MP, 2224516, 234, 31036, 393A, 42051, 5001202786, 51036, 51036XP, 61036, 61036BP, 618-51036, 618-51036MP...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1989 - Buick Skyhawk | L | - | Canada | 4 Cyl 2.0L | 122 |
- Redi-sleeve
- with 0.563 (in) Width 2.063 (in) Outside Diameter
- National 99176 Redi-sleeve
- Product Attributes:
- Width on Shaft (MM): 14.300
- Shaft Size (Inch): 1.766
- Installation Depth (Inch): 0.813
- Shaft Size Minimum (Inch): 1.761
- Overall Width (Inch): 0.688
- Shaft Size Maximum (Inch): 1.767
- Product Description: Repair Sleeve
- Width on Shaft (Inch): 0.563
- Flanged Outside Diameter (Inch): 2.063
- Flanged Outside Diameter (MM): 52.400
- Unit of Dimension: Inch
- Installation Depth (MM): 20.650
- Shaft Size Maximum (MM): 44.880
- Shaft Size Minimum (MM): 44.730
- Shaft Size (MM): 44.856
- National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
This Part Fits the Following OEM/Substitute Numbers:
0704-7882, 66597RS, 99176, 99176RS, KWK99176, N99176, NN99176
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1989 - Buick Skyhawk | L | - | Front | 4 Cyl 2.0L | 122 |
- WIX Spin-On Lube Filter
- Also Available In Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.921
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 7-9 Gpm
- Style: Spin-on Lube Filter
- Class: A
- Burst Pressure: 325
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: None
- Media Material: Enhanced Cellulose
- Anti-Drain Back Valve: Yes
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
This Part Fits the Following OEM/Substitute Numbers:
0A37970001, 0FE00265, 1036, 120, 12555891, 13505802, 15611-U3160-71, 1717106, 1804087, 187879, 19210286, 2036, 2051A, 21036, 218, 2224516, 2318700, 234...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1989 - Buick Skyhawk | L | - | Canada | 4 Cyl 2.0L | 122 |
- Crankshaft Seal
- with 0.375 (in) Width 2.416 (in) Outside Diameter
- National 9845 Crankshaft Seal
- Product Attributes:
- Inside Diameter:
- 1.763
- 44.780
- Shaft (Inch): 1.763
- Helix Type: Clockwise-spiral Lip Design
- Width (Inch): 0.375
- Unit of Dimension: Inch
- Housing Bore (Inch): 2.409
- Outside Diameter:
- 2.416
- 61.370
- Outside Diameter (Inch): 2.416
- Redicoat: Yes
- Shaft (MM): 44.780
- Part Description: Oil Seal
- Inside Diameter:
- National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
This Part Fits the Following OEM/Substitute Numbers:
07042962, 09110, 10036286, 10111769, 10243247, 10243965, 12043247, 12303604, 14033199, 14076303, 15-00106, 15527588, 17280, 17286, 17775, 211-6232, 295-24, 296-04...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1989 - Buick Skyhawk | L | - | Front | 4 Cyl 2.0L | 122 |
- Oil Drain Plug Pilot Point M12-1.75, Head Size 15Mm
- 15 mm Head M12 x 1.75 Thread 1.06 In. Length Package Quantity: 1 Dorman - AutoGrade - Oil-Tite! - Clamshell Packaging Type: Clamshell Thread Pitch: 1.75 Multi-Fit
- Product Attributes:
- Thread Size: M12x1.75
- Threads Per Inch: 0
- SAE or Metric: Metric
- Package Contents: 1 Drain Plug; 1 Gasket
- Head Size (SAE/Metric): 15 Mm
- Magnetic: No
- Thread Type: Metric
- Oversized Thread: No
- Bolt Grade: 5.8
- Special Tool Required: No
- Gasket Type: Gasket
- Socket Points: 6
- Head Drive Type: Hex
- Describe Type: Pilot Point
- Program: Universal Oil
- Drain Method: Conventional
-
Features:
- Ideal replacement - this engine oil drain plug matches the fit and function of the original drain plug
- Durable construction - this replacement drain plug is made of corrosion-resistant materials for reliable service
- Cost-effective solution - offers original equipment performance at competitive price
- Quality tested - this part has undergone try-on testing to ensure a quality seal
- This replacement engine oil drain plug is a direct replacement for a damaged or worn original equipment drain plug, precisely matching the thread pitch to ensure a quality seal.
This Part Fits the Following OEM/Substitute Numbers:
10017615, 10055425, 11518377, 11519408, 1151A78J01, 12552966, 24100042, 3522351, 3536964, 3538469, 652116, 8100176150, 8115183770, 8115194080, 8132293, 8241000420, 88891787, 9L8Z6730A...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 1989 - Buick Skyhawk |
- Pipe Plug C.S. Hex 1/8-27 Npt X 5/16 In.
- 2 Required Package Quantity: 5 Dorman - AutoGrade - Boxed
- Product Attributes:
- Open End Diameter (in): 0.4 In
- Package Contents: 5 Pipe Plugs
- Closed End Diameter: 0.21 In
-
Features:
- Direct replacement - this engine cylinder head plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution - this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction - this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This engine cylinder head plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
This Part Fits the Following OEM/Substitute Numbers:
10040001, 24572543, 94028733, 96067803
Additional Fitment Information:
| Vehicle |
|---|
| 1989 - Buick Skyhawk |
- Metal/Rubber Drain Plug Gasket, Fits 1/2, M12, M12 So
- Metal/Rubber Gasket Package Quantity: 25 Dorman - AutoGrade - Boxed Packaging Type: Box Inside Diameter (in): 0.453 in Gasket Metal; Rubber Package Contents: 25 Metal/rubber Gaskets
- Product Attributes:
- Inside Diameter: 0.453
- Package Contents: 25 Metal/rubber Gaskets
- Outside Diameter: 0.973
- Thickness: 2.06
-
Features:
- Direct replacement - these engine oil drain plug gaskets are made to match the fit and performance of the original equipment components
- Restores functionality - built to restore a proper seal
- Durable construction - this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- These oil drain plug gaskets are designed to specific sizes and standards for reliable replacement at every oil change.
This Part Fits the Following OEM/Substitute Numbers:
1051, 14079550, 14090908, 1625762, 1631748, 17631pk, 2124, 24571185, 25524544, 263-875, 323281, 5741252, 704-1093, 74-08, 8140909080
Additional Fitment Information:
| Vehicle |
|---|
| 1989 - Buick Skyhawk |
Showing 1 - 10 of 53 products
Loading...