Image
Product
Price
- FRAM, PH3506, Oil Filter
- Spin-on Oil Filter Alternate filter for PH3675
- Extra Guard
- Product Attributes:
- Gasket Inside Diameter: 4.010
- Non Slip Grip: Yes
- Gasket Thickness: 0.480
- Micron Rating: 8.000
- Torque Nut: No
- Burst Pressure: 310.000
- Gasket Material: Base
- Housing Color: Orange
- Inside Thread Diameter: 13/16-16
- Marine Approved: No
- Outside Diameter: 3.984
- Gasket Outside Diameter: 4.664
- Bypass Relief Valve: No
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
12187, 1931018, ABP/N10G-LF3000, LF438, LF515, LFP2258
Additional Fitment Information:
| Vehicle |
|---|
| 1989 - Cadillac Fleetwood |
- Stock Replacement Push Rod
- Stock Replacement Push Rod
- Stock
- Product Attributes:
- Diameter:
- 0.312
- 7.92
- 8.0
- Drilled: Yes
- Length:
- 195.60
- 196.0
- 7.701
- Top Tip Diameter:
- 0.375
- 10.0
- 9.53
- Title: Engine Push Rod
- Top Tip Type: Ball End
- Bottom Tip Diameter:
- 0.375
- 10.0
- 9.53
- Bottom Tip Type: Ball End
- Diameter:
- Made In USA. Melling offers a broad selection of push rods for both standard and performance engine applications. Melling push rods are built to the most stringent specifications using only the highest quality materials and manufacturing processes. Melling recommends always installing new push rods to assure proper valve train geometry and performance. In addition to OEM push rod applications, Melling select offers chrome molly push rods for high performance applications.
-
Suggested Purchase Quantity: 16
- Most jobs typically require 16 of this item.
This Part Fits the Following OEM/Substitute Numbers:
190-1489, 215-4218, 22533631, 48195, MPR-365, PR-1489, PR-3244, PR-365, RP-3244, RP302
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Engine VIN | CID |
|---|---|---|---|---|---|
| 1989 - Cadillac Brougham | V | - | 8 Cyl 5.0L | Y | 307 |
- Stock Replacement Push Rod
- Stock Replacement Push Rod
- Stock
- Product Attributes:
- Diameter:
- 0.312
- 8.0
- Drilled: Yes
- Length:
- 196.0
- 7.701
- Top Tip Diameter:
- 0.375
- 10.0
- Title: Engine Push Rod
- Top Tip Type: Ball End
- Bottom Tip Diameter:
- 0.375
- 10.0
- Bottom Tip Type: Ball End
- Diameter:
- Made In USA. Melling offers a broad selection of push rods for both standard and performance engine applications. Melling push rods are built to the most stringent specifications using only the highest quality materials and manufacturing processes. Melling recommends always installing new push rods to assure proper valve train geometry and performance. In addition to OEM push rod applications, Melling select offers chrome molly push rods for high performance applications.
-
Suggested Purchase Quantity: 16
- Most jobs typically require 16 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Engine VIN | CID |
|---|---|---|---|---|---|
| 1989 - Cadillac Brougham | V | - | 8 Cyl 5.0L | Y | 307 |
- Engine Valve Lifter
- Hydraulic Roller Lifters; Riveted Retaining Pin
- Sealed Power HT-2148A Lifter (Pack of 4)
- Sealed Power® Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.
-
Suggested Purchase Quantity: 16
- Most jobs typically require 16 of this item.
This Part Fits the Following OEM/Substitute Numbers:
12499225, 12564012, 12576400, 12648846, 17089852, 17109057, 17120090, 17120735, 17121905, 17122490, 213-1738, 2131738, 36-2148, 5233745, 5234660, 5234670, 5234890, 5235498...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1989 - Cadillac Seville | V | - | 8 Cyl 4.5L | 273 |
- Engine Oil Filler Cap
- Product Attributes:
- Meets or Exceeds Original Equipment Manufacture Specifications: Yes
- Vented: No
- Neck Diameter: 1.18 In
- Shell Diameter: 2.25 In
- Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
This Part Fits the Following OEM/Substitute Numbers:
06410891, 10044670, 10066, 10110855, 10149601, 10149603, 10191498, 11066, 12334506, 12551693, 12553195, 12C19, 14047082, 14057100, 14058750, 14063774, 14066, 14077921...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1989 - Cadillac Brougham | V | - | 8 Cyl 5.0L | 307 |
- WIX Spin-On Lube Filter
- Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.921
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 9-11 Gpm
- Style: Spin-on Lube Filter
- Class: C
- Burst Pressure: 325
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: None
- Media Material: Enhanced Cellulose
- Anti-Drain Back Valve: No
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
This Part Fits the Following OEM/Substitute Numbers:
0FE00174, 1045, 12587552, 13429, 166, 1717252, 2045, 21522, 2224512, 23.483.00, 23.483.40, 230, 25010276, 25010324, 31.522.00, 31522, 3I1108, 41522...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1989 - Cadillac Commercial Chassis | V | - | United States | 8 Cyl 4.5L | 273 |
- Oil Drain Plug Pilot Point M12-1.75, Head Size 15Mm
- 15 mm Head M12 x 1.75 Thread 1.06 In. Length Package Quantity: 1 Dorman - AutoGrade - Oil-Tite! - Clamshell Packaging Type: Clamshell Thread Pitch: 1.75 Multi-Fit
- Product Attributes:
- Thread Size: M12x1.75
- Threads Per Inch: 0
- SAE or Metric: Metric
- Package Contents: 1 Drain Plug; 1 Gasket
- Head Size (SAE/Metric): 15 Mm
- Magnetic: No
- Thread Type: Metric
- Oversized Thread: No
- Bolt Grade: 5.8
- Special Tool Required: No
- Gasket Type: Gasket
- Socket Points: 6
- Head Drive Type: Hex
- Describe Type: Pilot Point
- Program: Universal Oil
- Drain Method: Conventional
-
Features:
- Ideal replacement - this engine oil drain plug matches the fit and function of the original drain plug
- Durable construction - this replacement drain plug is made of corrosion-resistant materials for reliable service
- Cost-effective solution - offers original equipment performance at competitive price
- Quality tested - this part has undergone try-on testing to ensure a quality seal
- This replacement engine oil drain plug is a direct replacement for a damaged or worn original equipment drain plug, precisely matching the thread pitch to ensure a quality seal.
This Part Fits the Following OEM/Substitute Numbers:
10017615, 10055425, 11518377, 11519408, 1151A78J01, 12552966, 24100042, 3522351, 3536964, 3538469, 652116, 8100176150, 8115183770, 8115194080, 8132293, 8241000420, 88891787, 9L8Z6730A...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 1989 - Cadillac Allante |
- Metal/Rubber Drain Plug Gasket, Fits 1/2, M12, M12 So
- Metal/Rubber Gasket Package Quantity: 25 Dorman - AutoGrade - Boxed Packaging Type: Box Inside Diameter (in): 0.453 in Gasket Metal; Rubber Package Contents: 25 Metal/rubber Gaskets
- Product Attributes:
- Inside Diameter: 0.453
- Package Contents: 25 Metal/rubber Gaskets
- Outside Diameter: 0.973
- Thickness: 2.06
-
Features:
- Direct replacement - these engine oil drain plug gaskets are made to match the fit and performance of the original equipment components
- Restores functionality - built to restore a proper seal
- Durable construction - this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- These oil drain plug gaskets are designed to specific sizes and standards for reliable replacement at every oil change.
This Part Fits the Following OEM/Substitute Numbers:
1051, 14079550, 14090908, 1625762, 1631748, 17631pk, 2124, 24571185, 25524544, 263-875, 323281, 5741252, 704-1093, 74-08, 8140909080
Additional Fitment Information:
| Vehicle |
|---|
| 1989 - Cadillac Allante |
- Oil Pan Gasket Set
- Cork
- FEL-PRO OS 13419 C Oil Pan Gasket Set
- Product Attributes:
- Part Material: Blue Stripe Cork-rubber
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
16314, 22519181, 2605, 384472, 7424930, CS 2562CE, OS30534, OS5250, OS554, RA1206
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1989 - Cadillac Brougham | V | - | 8 Cyl 5.0L | 307 |
- Metal Clip Nut No.8
- Package Quantity: 3 Packaging Type: Clamshell
- Product Attributes:
- Package Contents: 3 Clip Nuts
- Length: 0.83
- Thread Direction: Clockwise
- Integral Washer: No
- Heat Hardened: No
- Zinc Coated: No
- Inside Diameter: 0.125
- Shape: Rectangular
- ACQ Rated: No
- Grade: Standard
- Open End Design: Yes
- Grade Or Class: Standard
- Metric Or SAE: Sae
-
Features:
- Constructed of high-quality materials for long-lasting durability
- Many different styles are available, including threaded and wide panel
- Packaged in a variety of piece counts for use with both small and large projects
- Also suitable for a broad range of industrial and commercial uses
- Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.
This Part Fits the Following OEM/Substitute Numbers:
15650655, 381818S2, 454060, 9424837, 9431530
Additional Fitment Information:
| Vehicle |
|---|
| 1989 - Cadillac Seville |
Showing 1 - 10 of 47 products
Loading...