2006 Ford Focus Engine Parts
Choose your Part Name for your 2006 Ford Focus
Engine Core Plug
Engine Crankcase Cover Gasket Set
Engine Crankshaft Pulley
Engine Crankshaft Seal
Engine Crankshaft Seal Kit
Engine Cylinder Head Gasket
Engine Harmonic Balancer
Engine Intake Manifold
Engine Intake Manifold Gasket
Engine Mount
Engine Oil Drain Plug
Engine Oil Drain Plug Gasket
Engine Oil Filler Cap
Engine Oil Filter
Engine Oil Filter Adapter
Engine Oil Filter Adapter Gasket
Engine Oil Filter Stand Gasket
Engine Oil Pan
Engine Oil Pressure Switch
Engine Oil Pump
Engine Oil Pump Chain
Engine Timing Chain
Engine Timing Chain Guide
Engine Timing Chain Tensioner
Engine Timing Chain Tensioner Guide
Engine Valve Cover Gasket
Engine Valve Cover Gasket Set
Engine Valve Stem Oil Seal
Image
Product
Price
- Oil Filter
- H-3.75 in.; OD-3 in.; 3/4 in. - 16 Thread; psi Relief Valve 11-14 Premium Oil Filter w/Wrench Off Nut; Spin On
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: .750 In. - 16
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 0.800 Lbs. (0.4 Kg)
- Product Box Height: 4.000 In. (102mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.190 In. (81mm)
- Package Material: Paperboard
- Product Box Length: 3.190 In. (81mm)
- PSI Relief Valve: 11-14
- Outside Diameter: 3.000 In. (76mm)
- Removal Nut: Yes
- Item Height: 3.750 In. (95mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
04E115561, 04E115561H, 104044, 11421258039, 1164626, 11715272, 1174416, 1183358, 119139, 1205002, 1220406, 1220645, 130144, 132023, 140517050, 1520813210, 1520813212, 1520855400...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Ford Focus | L | 1999 | 4 Cyl 2.0L | 122 |
- Harmonic Balancer Assembly
- Product Attributes:
- Color/Finish: Black
- Grade Type: Regular
- Package Contents:
- 1 Harmonic Balancer
- Harmonic Balancer; Woodruff Key
- Degree Markings: Yes
- Drive Belt Type: Serpentine
-
Features:
- Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement
- Durable construction - stringent specifications and careful construction help ensure longevity
- Thoroughly tested - this harmonic balancer has undergone dimensional verification, material validation and functional testing
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.
This Part Fits the Following OEM/Substitute Numbers:
102286, 1F2011371, 1S7Z6312BA, 5L8Z6312AA, 7U7Z6312A, 7U7Z6312B, 8M6Z6312A, 8S7Z6312A, 8U7Z6312A, LF0111400, LF0111400A, PB1587N, SK594318, ZZC211400, ZZC211400A, ZZC211400B, ZZCA11371, ZZCA11371A...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Ford Focus | L | 1989 | 4 Cyl 2.0L | 121 |
- FRAM, XG3614, Oil Filter
- Spin-on Oil Filter
- Ultra Synthetic
- Product Attributes:
- Non Slip Grip: Yes
- Micron Rating: 3.000
- Torque Nut: No
- Burst Pressure: 310.000
- Replaceable Filter: No
- Inside Thread Diameter: 3/4-16
- Bypass Relief Valve Setting: 12.000
- Marine Approved: No
- Outside Diameter: 2.984
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- FRAM Ultra Synthetic® Oil Filters with SureGrip® is the proven leader in ultimate engine protection for today's cars and light duty trucks. Ultra Synthetic is engineered for drivers who require maximum engine protection and use synthetic motor oils for extended 20,000 mile change intervals. This high capacity, high efficiency filter delivers peak performance. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
5214435, AF27, B23145, BE-231, FB100
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Ford Focus | L | 1999 | 4 Cyl 2.0L | 122 |
- FRAM, PH3614, Oil Filter
- Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Gasket Inside Diameter: 2.500
- Non Slip Grip: Yes
- Gasket Thickness: 0.078
- Micron Rating: 8.000
- Torque Nut: No
- Burst Pressure: 310.000
- Gasket Material: Base
- Gasket Type: Base
- Inside Thread Diameter: 3/4-16
- Bypass Relief Valve Setting: 12.000
- Marine Approved: No
- Outside Diameter: 2.984
- Gasket Outside Diameter: 2.859
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
2900535100, 600-211-6240, A44081, B236, LF283, LF3415, PF2158, RV-51
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Ford Focus | L | 1999 | 4 Cyl 2.0L | 122 |
- Spin-On Oil Defense, DL3614
- DEFENSE Spin-on Oil Filter
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Ford Focus | L | 1999 | 4 Cyl 2.0L | 122 |
- Oil Drain Plug Pilot Point M14-1.50, Head Size 16Mm
- 16 mm Head Package Quantity: 5 Dorman - AutoGrade - Boxed Packaging Type: Box Thread Pitch: 1.5 mm
- Product Attributes:
- Thread Size: M14-1.50
- Threads Per Inch: 0
- SAE or Metric: Metric
- Package Contents: 5 Oil Drain Plugs
- Head Size (SAE/Metric): 16 Mm
- Length: 0.857
- Magnetic: No
- Thread Type: Fine
- Oversized Thread: No
- Bolt Grade: 5.8
- Special Tool Required: No
- Gasket Type: Gasket
- Socket Points: 6
- Head Drive Type: Hex
- Describe Type: Pilot Point
- Program: Universal Oil
- Drain Method: Conventional
-
Features:
- Ideal replacement - this engine oil drain plug matches the fit and function of the original drain plug
- Durable construction - this replacement drain plug is made of corrosion-resistant materials for reliable service
- Cost-effective solution - offers original equipment performance at competitive price
- Quality tested - this part has undergone try-on testing to ensure a quality seal
- This replacement engine oil drain plug is a direct replacement for a damaged or worn original equipment drain plug, precisely matching the thread pitch to ensure a quality seal.
This Part Fits the Following OEM/Substitute Numbers:
0924714027, 0B6S710404A, 1013938, 1027, 113115193, 1151785Z00, 1151786Z00, 1151786Z02, 11569943, 12582347, 17613pk, 2151221000, 2151221010, 2151223000, 2151223001, 215122X000, 263-917, 323276...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Ford Focus | L | 1989 | 4 Cyl 2.0L | 121 |
- Oil Drain Plug Pilot Point M14-1.50, Head Size 13Mm
- 13 mm Head Package Quantity: 5 Dorman - AutoGrade - Boxed Packaging Type: Box Thread Pitch: 1.5 mm
- Product Attributes:
- Thread Size: M14-1.50
- Threads Per Inch: 0
- SAE or Metric: Metric
- Package Contents: 5 Oil Drain Plugs
- Head Size (SAE/Metric): 13 Mm
- Magnetic: No
- Length: 0.838
- Thread Type: Fine
- Oversized Thread: No
- Bolt Grade: 3
- Special Tool Required: No
- Gasket Type: Gasket
- Socket Points: 6
- Head Drive Type: Hex
- Describe Type: Pilot Point
- Drain Method: Conventional
-
Features:
- Ideal replacement - this engine oil drain plug matches the fit and function of the original drain plug
- Durable construction - this replacement drain plug is made of corrosion-resistant materials for reliable service
- Cost-effective solution - offers original equipment performance at competitive price
- Quality tested - this part has undergone try-on testing to ensure a quality seal
- This replacement engine oil drain plug is a direct replacement for a damaged or worn original equipment drain plug, precisely matching the thread pitch to ensure a quality seal.
This Part Fits the Following OEM/Substitute Numbers:
1013938, 1040, 1054, 1066, 11970pk, 323528, 6506214AA, 6507741AA, 68094567AA, 7B0103193, 80-06, 80-26, AJ83017, AJ88461, F6TZ6730BA, LF1310404, YF091046Y, ZZM210407...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Ford Focus | L | 1989 | 4 Cyl 2.0L | 121 |
- Valve Cover Gasket Set
- PermaDry molded rubber gskt. incl.
- FEL-PRO VS 50639 R-1 Valve Cover Gasket Set
- Product Attributes:
- Part Material: Permadry Molded Rubber
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Ford Focus | L | 1999 | 4 Cyl 2.0L | 122 |
- Oil Pan Drain Plug Gasket
- 0.550in Inside Diameter x 0.890in Outside Diameter Rubber ; Dished Washer
- FEL-PRO 72907 Oil Pan Drain Plug Gasket
- Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Ford Focus | L | 1999 | 4 Cyl 2.0L | 122 |
- Engine Mount Bushing
- OEM Replacement Insert Only
This Part Fits the Following OEM/Substitute Numbers:
3103, 3S4Z6038BA, 5S4Z6038AA, 5S4Z6038BA, 5S4Z6038BB, 5S4Z6038CA, 605312, A5312, B3103, EM-3103
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2006 - Ford Focus | L | - | Front Right | 4 Cyl 2.3L | 140 |
Showing 1 - 10 of 72 products
Loading...