Image
Product
Price
- Oil Filter
- H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: M20 X 1.500 In.
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 0.600 Lbs. (0.2 Kg)
- Product Box Height: 3.630 In. (92mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Outside Diameter: 2.688 In. (68mm)
- Removal Nut: Yes
- Item Height: 2.875 In. (73mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
1173228, 11930535150, 11930535151, 1321800010, 1520831UOB, 1520865F0C, 1520865F0E, 15208AA12A, 15208K010, 15400PFB004, 15400PFB014, 15400PJ7005, 15400PM3004, 15410MFJD01, 158332430, 1585332430, 1585399179, 1857444...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Honda HR-V |
- FRAM, TG7317, Oil Filter
- Spin-on Oil Filter
- Tough Guard
- Product Attributes:
- Gasket Inside Diameter: 4.130
- Non Slip Grip: Yes
- Gasket Thickness: 0.125
- Micron Rating: 3.000
- Torque Nut: No
- Burst Pressure: 350.000
- Gasket Material: O-ring (1) O-ring 1
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 9-15'
- Marine Approved: No
- Outside Diameter: 2.688
- Gasket Outside Diameter: 4.375
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- FRAM Tough Guard® Oil Filters with SureGrip® deliver premium high mileage engine protection for today's passenger cars and light duty trucks. Tough Guard provides premium engine protection for drivers in stop-and-go traffic and the durability to withstand tougher driving conditions and towing. Top quality engineering makes it an ideal pairing for any oil type. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
230962, D52932, L688, PF1089
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Honda Pilot |
- FRAM, PH7317, Oil Filter
- Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Non Slip Grip: Yes
- Micron Rating: 8.000
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 350.000
- Housing Color: White
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 9-15'
- Marine Approved: No
- Outside Diameter: 2.688
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
1661964, 20514654, BF1366-O, BW5183, FP531, FS19735, H700WK, R260P
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Honda Clarity | L | 1497 | 4 Cyl 1.5L | - |
- FRAM, XG7317, Oil Filter
- Spin-on Oil Filter
- Ultra Synthetic
- Product Attributes:
- Non Slip Grip: Yes
- Micron Rating: 3.000
- Torque Nut: No
- Burst Pressure: 350.000
- Replaceable Filter: No
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 9-15'
- Marine Approved: No
- Outside Diameter: 2.688
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- FRAM Ultra Synthetic® Oil Filters with SureGrip® is the proven leader in ultimate engine protection for today's cars and light duty trucks. Ultra Synthetic is engineered for drivers who require maximum engine protection and use synthetic motor oils for extended 20,000 mile change intervals. This high capacity, high efficiency filter delivers peak performance. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
46986, 6986BP, B23142M, BE-478, CB33, CF105
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Honda Odyssey |
- Interference engine application
- PowerGrip Premium OE Timing Belt
- Product Attributes:
- Top Width:
- .787
- 20
- Belt Material: Hsn
- OE Comparison Rating: Oe Exact
- Timing Marks: No
- Pitch: .315
- Cog Quantity: 197
- Pitch Length:
- 1576
- 62.047
- Profile Type: Modified Curvilinear (iii)
- Cord Material: Fiberglass
- Top Width:
This Part Fits the Following OEM/Substitute Numbers:
12581899, 14400R9PA01, 14400RCAA01, 250329, 40329, 95329, 95329FN, B329, CD329, HS620YU20, OHC329, T329, TB329
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2018 - Honda Pilot | V | 3471 | GAS | 6 Cyl 3.5L | - |
- Engine Timing Camshaft Sprocket
- Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Cloyes timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation. Featuring helical tooth form for quiet operation, and precision-machined bore for true fit, Cloyes Timing Sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs. Cloyes parts are CAD designed and manufactured using advanced materials. Each part is extensively tested for function and durability to ensure optimal performance. Cloyes recommends the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced as these components play a vital role in supporting the chain and keeping it tight. Refer to our online catalog for detailed application-specific information.
This Part Fits the Following OEM/Substitute Numbers:
14211-PWA-000, S1030
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Engine Version | CID |
|---|---|---|---|---|---|---|
| 2018 - Honda Accord | L | 1993 | Front | 4 Cyl 2.0L | i-VTEC | 122 |
- Honda Civic 1.5L T Baffled Oil Catch Can, PCV Side, 2016-2021
- Baffled Oil Catch Can, PCV Side, fits Honda Civic 1.5 Turbo 2016-2021
- Product Attributes:
- SellingPoint04: Application-specific Bracket Mounts The Can In A Serviceable Location
- SellingPoint05: Billet 6061 Aluminum Sealed Can
- SellingPoint06: Internal Air Diverter Turbulates Air Longer To Improve Oil Separation
- SellingPoint07: Defends Intercooler, Intake System, And Essential Components From Oil Blow-by
- SellingPoint01: Direct Fit For 2016-2021 Honda Civic 1.5 Turbo
- SellingPoint02: Single Can Mounts In Line With The Pcv System To Separate Oil From Air Using A 50 Micron Bronze Filter
- SellingPoint03: Installs In Under 30 Minutes
- TechSpec Chassis Codes: N/a
- SellingPoint08: Helps Maintain Proper Octane Levels To Reduce Potential Detonation
- SellingPoint09: Mishimoto Lifetime Warranty
- TechSpec Drain Plug Thread Size: N/a
- TechSpec Outlet: N/a
- TechSpec Catch Can Diameter (in): N/a
- Installation Difficulty: 2
- SellingPoint10: Patent Numberus D884,760 S
- TechSpec Note: N/a
- TechSpec Installation Notes: N/a
- Prop 65 (C, R or CR): Cr
- SellingPoint15: N/a
- Install Difficulty: 2
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: N/a
- SellingPoint13: N/a
- TechSpec Height (in): N/a
- SellingPoint14: N/a
- Prop 65 - Short Label: Prop65_warning.jpg
- TechSpec Material: N/a
- TechSpec Applications: N/a
- TechSpec Includes: N/a
- TechSpec Inlet: N/a
- Title: Mishimoto Honda Civic 1.5l T Baffled Oil Catch Can, Pcv Side, 2016-2021
-
Features:
- Direct fit for 2016+ Honda Civic 1.5 Turbo
- Single can mounts in line with the PCV system to separate oil from air using a 50 micron bronze filt
- Installs in under 30 minutes
- Defends intercooler, intake system, and essential components from oil blow-by
- Mishimoto Lifetime Warranty
- We here at Mishimoto are very excited to see the first turbocharged Honda engine in the US domestic market. It may be small, but It's still packs a punch for having a displacement of only 1.5L. The Mishimoto Civic catch can will make sure that your 1.5L turbocharged engine keeps running like it just rolled off the assembly line. The 2-port baffled catch can mounts in the back of the engine bay by means of the included application-specific bracket. The 50 micron bronze filter keeps blow-by from making a mess of your intake tract. This 2016-2021 Civic catch can kit includes direct-fit hoses to make for an easy 30 minute installation. The included Mishimoto Lifetime Warranty ensures that your Civic will always have the protection it needs! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you've seen what We've seen in the bottom of our catch cans, you won't want that draining back into your oil either.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2018 - Honda Civic | L | 1497 | GAS | 4 Cyl 1.5L | - |
- Oil Filter
- H-3.75 in.; PD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 0.600 Lbs. (0.3 Kg)
- Product Box Height: 4.130 In. (105mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 2.810 In. (71 Mm)
- Package Material: Paperboard
- Product Box Length: 2.880 In. (73mm)
- PSI Relief Valve: 11-17
- Outside Diameter: 2.688 In. (68mm)
- Removal Nut: Yes
- Item Height: 3.750 In. (95mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2018 - Honda Clarity | L | 1497 | 4 Cyl 1.5L | Plug-In Hybrid Touring | - |
- Oil Filter
- H-3.75 in.; PD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 0.600 Lbs. (0.3 Kg)
- Product Box Height: 4.130 In. (105mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 2.810 In. (71 Mm)
- Package Material: Paperboard
- Product Box Length: 2.880 In. (73mm)
- PSI Relief Valve: 11-17
- Outside Diameter: 2.688 In. (68mm)
- Removal Nut: Yes
- Item Height: 3.750 In. (95mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
0410755, 0410769, 0410789, 0410797, 0410812, 0418064, 0418075, 0418076, 0418135, 0986452036, 102827901, 1041426, 1041427, 11715829, 11715849, 120137, 120722, 122497...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Honda HR-V | L | 1799 | 4 Cyl 1.8L | - |
- Interference engine application
- Timing Belt Tensioner
- Product Attributes:
- Pulley Quantity: 0
- Tensioner Type: Hydraulic Cylinder
- OE Comparison Rating: Oe Exact
- Contents: Tensioner
This Part Fits the Following OEM/Substitute Numbers:
12581902, 14520RCAA01, 420-127, 85019, 85019FN, 85067, BTH001, T43129
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2018 - Honda Ridgeline | V | 3471 | GAS | 6 Cyl 3.5L | - |
Showing 1 - 10 of 338 products
Loading...