Image
Product
Price
- Oil Filter
- H-3.406 in.; OD-3.15 in.; M20 x 1.5-6H Thread; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: M20 X 1.500 In. -6h
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 0.800 Lbs. (0.3 Kg)
- Product Box Height: 4.000 In. (102mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.190 In. (81mm)
- Package Material: Paperboard
- Product Box Length: 3.190 In. (81mm)
- PSI Relief Valve: 11-17
- Outside Diameter: 3.156 In. (80mm)
- Removal Nut: Yes
- Item Height: 3.406 In. (87mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Kia Niro |
- Oil Filter
- H-3.406 in.; OD-3.15 in.; M20 x 1.5-6H Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: M20 X 1.500 In. -6h
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 0.800 Lbs. (0.3 Kg)
- Product Box Height: 4.000 In. (102mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.190 In. (81mm)
- Package Material: Paperboard
- Product Box Length: 3.190 In. (81mm)
- PSI Relief Valve: 11-17
- Outside Diameter: 3.156 In. (80mm)
- Removal Nut: Yes
- Item Height: 3.406 In. (87mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
102703301, 104079A1, 1146934, 116182, 116509, 11713229, 11900535100, 11900535151, 119530030, 11966035150, 1200664, 121433, 1216382301, 12195035152, 12195035153, 1220827, 1220833, 12445035100...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2019 - Kia Sorento | L | 2359 | 4 Cyl 2.4L | LX | - |
- Harmonic Balancer Assembly
- Product Attributes:
- Color/Finish: Black
- Grade Type: Regular
- Package Contents: Balancer; Woodruff Key; Instruction Sheet
- Degree Markings: Yes
- Drive Belt Type: Serpentine
-
Features:
- Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement
- Durable construction - stringent specifications and careful construction help ensure longevity
- Thoroughly tested - this harmonic balancer has undergone dimensional verification, material validation and functional testing
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.
This Part Fits the Following OEM/Substitute Numbers:
102222, 231243C100, 231243C101, 231243C110, 231243C111, 231243C201, 231243C700, 2312532000, 594279, PB1528N, SK594268, SK594279
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2019 - Kia Cadenza | V | 3342 | 6 Cyl 3.3L | - |
- FRAM, PH9688, Oil Filter
- Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Non Slip Grip: Yes
- Micron Rating: 8.000
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 310.000
- Housing Color: White
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 9-15'
- Marine Approved: No
- Outside Diameter: 3.020
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
24346, 33935, 3I-1288, FF1073, FS19520, P559114, TP1057, WD-394
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2019 - Kia Optima | L | 1999 | 4 Cyl 2.0L | 122 |
- FRAM, CH11934, Oil Filter
- Full-Flow Lube Cartridge
- Extra Guard
- Product Attributes:
- Inside Diameter Top: 1.102
- Gasket Type: O-ring
- Housing Color: Na
- Outside Diameter: 2.587
- Inner Diameter Bottom: 1.102
- Non Slip Grip: No
- Bypass Relief Valve: No
- Filter Media Material: Cellulose
- Anti-Drain Back Valve: No
- Torque Nut: No
- FRAM Extra Guard® Oil Filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
2931095, A13211, ABP/N10G-LF3914, E721H, LF375, LF3914, LF552, PS-7026
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Kia Sedona |
- FRAM, TG9688, Oil Filter
- Spin-on Oil Filter
- Tough Guard
- Product Attributes:
- Burst Pressure: 310.000
- Inside Thread Diameter: 20mm X 1.5mm
- Bypass Relief Valve Setting: 9-15
- Marine Approved: No
- Outside Diameter: 3.020
- Non Slip Grip: Yes
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- Micron Rating: 3.000
- Torque Nut: No
- FRAM Tough Guard® Oil Filters with SureGrip® deliver premium high mileage engine protection for today's passenger cars and light duty trucks. Tough Guard provides premium engine protection for drivers in stop-and-go traffic and the durability to withstand tougher driving conditions and towing. Top quality engineering makes it an ideal pairing for any oil type. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
11541, 3I-1231, 3I-1342, 42991, 59365-CS, 6513641, B20161M, C428, HF700, PF996, RV-40
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2019 - Kia Soul | L | 1999 | 4 Cyl 2.0L | 122 |
- FRAM, XG9688, Oil Filter
- Spin-on Oil Filter
- Ultra Synthetic
- Product Attributes:
- Non Slip Grip: Yes
- Micron Rating: 3.000
- Torque Nut: No
- Burst Pressure: 310.000
- Replaceable Filter: No
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 9-15'
- Marine Approved: No
- Outside Diameter: 3.020
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- FRAM Ultra Synthetic® Oil Filters with SureGrip® is the proven leader in ultimate engine protection for today's cars and light duty trucks. Ultra Synthetic is engineered for drivers who require maximum engine protection and use synthetic motor oils for extended 20,000 mile change intervals. This high capacity, high efficiency filter delivers peak performance. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
1719859, CB35
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2019 - Kia Stinger | L | 1998 | 4 Cyl 2.0L | 122 |
- Stock Replacement Exhaust Valve
- Stock Replacement Exhaust Valve
- Stock
- Product Attributes:
- Lock Groove Quantity: 1
- Valve Head Diameter:
- 1.137
- 28.88
- 29.0
- Grade Type: Regular
- Seat Angle: 45.0
- Length:
- 105.89
- 106.0
- 4.169
- Coated Finish: Yes
- Stem Diameter:
- 0.215
- 5.0
- 5.46
- Title: Engine Exhaust Valve
- Oversized: No
- Locks Included: No
- Precision engineering, selection of superior grade alloy materials and advanced manufacturing processes ensure that Melling exhaust valves meet the exacting specifications required for efficient, durable and powerful performance. Melling exhaust valves feature high fatigue strength materials, excellent heat resistance and years of dependable performance. Melling exhaust valve selections are available in a wide variety of designs and materials for most OEM and performance vehicle applications.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1011A178, 13256, 22212-25000, 22212-25002, E-5283, EV168, EVHY11, V3256
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Engine | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 2019 - Kia Sportage | L | 2359 | DOHC | 4 Cyl 2.4L | C | - |
- Stock Replacement Exhaust Valve
- Stock Replacement Exhaust Valve
- Stock
- Product Attributes:
- Lock Groove Quantity: 1
- Valve Head Diameter:
- 1.137
- 29.0
- Grade Type: Regular
- Seat Angle: 45.0
- Length:
- 106.0
- 4.169
- Coated Finish: Yes
- Stem Diameter:
- 0.215
- 5.0
- Title: Engine Exhaust Valve
- Oversized: No
- Locks Included: No
- Precision engineering, selection of superior grade alloy materials and advanced manufacturing processes ensure that Melling exhaust valves meet the exacting specifications required for efficient, durable and powerful performance. Melling exhaust valves feature high fatigue strength materials, excellent heat resistance and years of dependable performance. Melling exhaust valve selections are available in a wide variety of designs and materials for most OEM and performance vehicle applications.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Engine | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 2019 - Kia Optima | L | 2359 | DOHC | 4 Cyl 2.4L | 3 | - |
- Engine Oil Filler Cap
- Product Attributes:
- Meets or Exceeds Original Equipment Manufacture Specifications: Yes
- Vented: No
- Neck Diameter: 1.32 In
- Shell Diameter: 2.63 In
- Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
This Part Fits the Following OEM/Substitute Numbers:
14151, 2651026611, 2651026630, 703-1922, 8151, 9MO151, MO151, NI, P8151
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2019 - Kia Optima | L | 2359 | 4 Cyl 2.4L | - |
Showing 1 - 10 of 234 products
Loading...