2021 Jeep Gladiator Engine Parts
Choose your Part Name for your 2021 Jeep Gladiator
Air Charge Temperature Sensor
Engine Core Plug
Engine Crankshaft Main Bearing Cap Bolt
Engine Crankshaft Pulley
Engine Crankshaft Seal
Engine Cylinder Head Bolt
Engine Cylinder Head Gasket Set
Engine Harmonic Balancer
Engine Intake Manifold Gasket
Engine Oil Dipstick Tube Seal
Engine Oil Drain Plug
Engine Oil Drain Plug Gasket
Engine Oil Filter
Engine Oil Filter Adapter
Engine Oil Filter Adapter O-Ring
Engine Oil Filter Adapter Seal
Engine Oil Filter Cover
Engine Oil Filter Housing
Engine Oil Filter Kit
Engine Oil Pump Pickup Tube Gasket
Engine Timing Cover Gasket Set
Engine Valve Cover Gasket
Engine Valve Cover Gasket Set
Engine Valve Spring
Engine Valve Spring Retainer
Engine Variable Valve Timing (VVT) Solenoid
Engine Variable Valve Timing (VVT) Solenoid Seal
Image
Product
Price
- FRAM, CH11665, Oil Filter
- Cartridge Oil Filter
- Extra Guard
- Product Attributes:
- Gasket Inside Diameter: 2.840
- Inner Diameter Bottom: 0.914
- Non Slip Grip: No
- Gasket Thickness: 0.140
- Torque Nut: No
- Inside Diameter Top: 0.914
- Gasket Material: O-ring (1) O-ring 1
- Gasket Type: O-ring
- Outside Diameter: 1.990
- Gasket Outside Diameter: 3.125
- Bypass Relief Valve: No
- Filter Media Material: Cellulose
- Anti-Drain Back Valve: No
- FRAM Extra Guard® Oil Filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
57128, E154HD48, HF35288, LF16176, LF481F, LF529, P856, PF1707
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2021 - Jeep Gladiator | V | 3604 | 6 Cyl 3.6L | 220 |
- Defense Oil - Full Flow LubeCartridge
- Cartridge Oil Filter DEFENSE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2021 - Jeep Gladiator | V | 3604 | 6 Cyl 3.6L | 220 |
- Aluminum Oil Filter Housing Kit, Fits 3.6L/3.2L Pentastar 2011-2017
- Aluminum Oil Filter Housing Kit, Fits 3.6L/3.2L Pentastar 2011-2017
- Product Attributes:
- SellingPoint04: Helps Prevent Hard-to-diagnose And Potentially Costly Oil Leaks
- SellingPoint05: Includes New, Pre-installed Oil Pressure And Temperature Sensors
- SellingPoint06: Upgraded Viton Seals Resist Fuel And Oil For Extended Service Life
- TechSpec Overall Length (in): 15
- SellingPoint07: Mishimoto Lifetime Warranty
- SellingPoint01: Fits 3.6l/3.2l Pentastar Engines Found In Many Jeep, Chrysler, And Dodge/ram Vehicles
- SellingPoint02: All-aluminum Housing Won't Crack Or Split Like Stock Plastic
- SellingPoint03: Includes New Oil Filter, Filter Cap, Intake Manifold Gaskets, Oil Seals, And Bolts For A One-stop Solution
- TechSpec Chassis Codes: N/a
- SellingPoint08: N/a
- SellingPoint09: N/a
- TechSpec Outlet: N/a
- TechSpec Core Height (in): 2.32
- TechSpec Core Thickness (in): 2.02
- Installation Difficulty: 3
- SellingPoint10: N/a
- TechSpec Note: Replaces Oe Part Numbers: 5184294ac, 5184294ad, 5184294ae, 5184304ae, 5184304af, 68105583aa, 68105583ab, 68105583ac, 68105583ad, 68105583ae, 68105583af, 68105583ag, 68308741aa, 68308741ab, 68308741ac, 68308741af, 68310865aa, 68310865ab, 68310865ac, 683108
- TechSpec Installation Notes: N/a
- SellingPoint15: N/a
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: Pentastar
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): 5.3
- TechSpec Overall Height (in): 9
- TechSpec Fluid Capacity (qts): N/a
- TechSpec Caution: To Avoid Damage, This Vehicle Must Use A Filter For 2014+ Vehicles. Oem Part Number 68191349ac Or Equivalent.
- TechSpec Applications: 2011-2017 Chrysler 200 3.6l V6--2011-2017 Chrysler 300 3.6l V6--2014-2016 Chrysler Town & Country 3.6l V6--2011-2014 Dodge Avenger 3.6l V6--2011-2017 Dodge Challenger 3.6l V6--2011-2017 Dodge Charger 3.6l V6--2011-2015 Dodge Durango 3.6l V6--2011-2017 Dod
- TechSpec Includes: (1) Oil Filter Housing--(1) Heat Exchanger--(1) Oil Filter Cap--(1) Oil Filter--(1) Oil Temperature Sensor--(1) Oil Pressure Sensor--(6) Gaskets--(1) Hardware Pack--mishimoto Lifetime Warranty
- TechSpec Rows: 8
- TechSpec Inlet: N/a
- TechSpec Core Construction: Stacked Plate
- TechSpec Overall Width (in): 4
- but they're not without their flaws.----The stock 3.6 oil filter housing is made from plastic and is known to become brittle after repeated heat cycles. When that happens, even the slightest amount of torque on the filter cap while performing an oil change can be enough to crack the housing and cause significant oil leaks. To make matters worse, the oil filter housing lives underneath the intake manifold, making it difficult to identify and diagnose the leak. Oil running down the back of the engine can look like a failed rear-main seal and end up costing you thousands in parts and labor, only to have the problem continue. Luckily, Mishimoto offers a solution to prevent the headache of chasing down oil leaks and give you peace of mind.----Our all-aluminum 3.6/3.2L Pentastar oil filter housing kit is a complete safeguard against frustrating oil leaks. As the name suggests, our oil filter housing swaps the stock brittle plastic for a robust aluminum replacement. This housing is significantly stronger than the stock polymer version and won't become brittle over time. We've also upgraded the seals to Viton for improved oil and fuel resistance, ensuring a long service life. This complete kit includes the aluminum housing, oil filter, filter cap, intake manifold gaskets, filter housing seals, heat exchanger, oil temp and pressure sensors, and bolts, making it a one-stop solution for your Pentastar. Like all Mishimoto products, this 3.6L/3.2L Pentastar aluminum oil filter housing kit is backed by our Mishimoto Lifetime Warranty, for a lifetime of leak-free reliability.
This Part Fits the Following OEM/Substitute Numbers:
5184294AC, 5184294AD, 5184294AE, 5184304AE, 5184304AF, 68105583AA, 68105583AB, 68105583AC, 68105583AD, 68105583AE, 68105583AF, 68105583AG, 68308741AA, 68308741AB, 68308741AC, 68308741AF, 68310865AA, 68310865AB...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Engine Version | CID |
|---|---|---|---|---|---|---|
| 2021 - Jeep Gladiator | V | 3604 | 6 Cyl 3.6L | Texas Trail | Pentastar | 220 |
- Models w/Pentastar Engine; Includes All Seals For Oil Filter And Adapter
- Engine Oil Filter Adapter O-Ring Kit; Models w/Pentastar Engine; Includes All Seals For Oil Filter And Adapter;
- Engine Oil Filter Adapter O-Ring Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Engine Oil Filter Adapter O-Ring Kit
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2021 - Jeep Gladiator | Willys Sport |
- w/3.6L Engine
- Intake Manifold Seal; w/3.6L Engine;
- Intake Manifold Seal
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm; Http://www.p65warnings.ca.gov/
-
Features:
- Intake Manifold Seal
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2021 - Jeep Gladiator | V | 3604 | 6 Cyl 3.6L | 220 |
- w/3.6L Engine
- Valve Cover Gasket Set; w/3.6L Engine;
- Valve Cover Gasket Set
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Valve Cover Gasket Set
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2021 - Jeep Gladiator | V | 3604 | 6 Cyl 3.6L | Willys Sport | 220 |
- Oil Drain Plug Pilot Point M14-1.50, Head Size 13Mm
- 13 mm Head Package Quantity: 5 Dorman - AutoGrade - Boxed Packaging Type: Box Thread Pitch: 1.5 mm
- Product Attributes:
- Thread Size: M14-1.50
- Threads Per Inch: 0
- SAE or Metric: Metric
- Package Contents: 5 Oil Drain Plugs
- Head Size (SAE/Metric): 13 Mm
- Magnetic: No
- Length: 0.838
- Thread Type: Fine
- Oversized Thread: No
- Bolt Grade: 3
- Special Tool Required: No
- Gasket Type: Gasket
- Socket Points: 6
- Head Drive Type: Hex
- Describe Type: Pilot Point
- Drain Method: Conventional
-
Features:
- Ideal replacement - this engine oil drain plug matches the fit and function of the original drain plug
- Durable construction - this replacement drain plug is made of corrosion-resistant materials for reliable service
- Cost-effective solution - offers original equipment performance at competitive price
- Quality tested - this part has undergone try-on testing to ensure a quality seal
- This replacement engine oil drain plug is a direct replacement for a damaged or worn original equipment drain plug, precisely matching the thread pitch to ensure a quality seal.
This Part Fits the Following OEM/Substitute Numbers:
1013938, 1040, 1054, 1066, 11970pk, 323528, 6506214AA, 6507741AA, 68094567AA, 7B0103193, 80-06, 80-26, AJ83017, AJ88461, F6TZ6730BA, LF1310404, YF091046Y, ZZM210407...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2021 - Jeep Gladiator | V | 2987 | 6 Cyl 3.0L | 182 |
- Oil Drain Plug Pilot Point M14-1.50, Head Size 16Mm
- 16 mm Head Package Quantity: 5 Dorman - AutoGrade - Boxed Packaging Type: Box Thread Pitch: 1.5 mm
- Product Attributes:
- Thread Size: M14-1.50
- Threads Per Inch: 0
- SAE or Metric: Metric
- Package Contents: 5 Oil Drain Plugs
- Head Size (SAE/Metric): 16 Mm
- Length: 0.857
- Magnetic: No
- Thread Type: Fine
- Oversized Thread: No
- Bolt Grade: 5.8
- Special Tool Required: No
- Gasket Type: Gasket
- Socket Points: 6
- Head Drive Type: Hex
- Describe Type: Pilot Point
- Program: Universal Oil
- Drain Method: Conventional
-
Features:
- Ideal replacement - this engine oil drain plug matches the fit and function of the original drain plug
- Durable construction - this replacement drain plug is made of corrosion-resistant materials for reliable service
- Cost-effective solution - offers original equipment performance at competitive price
- Quality tested - this part has undergone try-on testing to ensure a quality seal
- This replacement engine oil drain plug is a direct replacement for a damaged or worn original equipment drain plug, precisely matching the thread pitch to ensure a quality seal.
This Part Fits the Following OEM/Substitute Numbers:
0924714027, 0B6S710404A, 1013938, 1027, 113115193, 1151785Z00, 1151786Z00, 1151786Z02, 11569943, 12582347, 17613pk, 2151221000, 2151221010, 2151223000, 2151223001, 215122X000, 263-917, 323276...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2021 - Jeep Gladiator | V | 2987 | 6 Cyl 3.0L | 182 |
- Black; Rubber
- Variable Valve Control Solenoid Seal; Black; Rubber;
- Variable Valve Control Solenoid Seal
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Direct Replacement
- Crown Supports Its Entire Line With A 12-Month Warranty
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2021 - Jeep Gladiator | Willys Sport |
- Models w/3.6L Engine
- Intake Manifold Seal; Models w/3.6L Engine;
- Intake Manifold Seal
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm; Http://www.p65warnings.ca.gov/
-
Features:
- Intake Manifold Seal
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2021 - Jeep Gladiator | V | 3604 | 6 Cyl 3.6L | 220 |
Showing 1 - 10 of 51 products
Loading...