You have arrived at our Exhaust Parts section at AutoPartsWAY.com. Here you will discover the Exhaust we stock
in our vast storage warehouse network. With our entirely North American established warehouse network, we provide a
Low Price Guarantee on all Exhaust Parts.
Our proficient staff of trained and qualified automotive pros is here to help you find the suitable Exhaust Parts you need
and have them transported to your destination of choice. No matter if you are a do it yourselfer or just want to buy
Exhaust Parts cheaper than from your regional shop or auto mechanic, and are having them professionally installed,
our staff can enable you in placing your Exhaust Parts purchase order.
Whether you want to place your Exhaust Parts purchase order over our safe and secure website, on the telephone or
through our safe and secure live chat, your purchase order will be sent speedily and accurately.
Some Exhaust Parts may be delicate. For this specific purpose we take extreme care in packaging your Exhaust Parts
purchase order right, and we utilize UPS, FedEx or USPS to ship your Exhaust Parts around the globe. Eventhough we
do everything possible to guarantee the safe and sound packaging and delivery of your Exhaust Parts order, it is
ridiculously uncommon yet still potential that your purchase order may be chipped or misplaced in transportation.
For this specific purpose we provide and promote you to buy shipping insurance on your Exhaust Parts order. This way,
in the uncommon case that your parcel is misplaced or damaged in transport, we can either rapidly send out a replacement
or refund you fully for the parts.
Then keeping in mind, if you require Exhaust Parts, delivered quickly and accurately, select AutoPartsWAY.com for all your Exhaust Parts.
We look forward to providing you with our highly rated service.
Vehicle | Block | CC | Engine | CID |
---|---|---|---|---|
1978 - Jeep Wagoneer | V | 6572 | 8 Cyl 6.6L | 401 |
Brand | Magnaflow |
---|---|
Part # | M66339106 |
Condition | New |
Warehouse | B |
Vehicle | Sub Model |
---|---|
1978 - Jeep Cherokee | Base |
Brand | Crown Automotive |
---|---|
Part # | C1YJ4004110 |
Condition | New |
Warehouse | B |
Vehicle |
---|
1978 - Jeep CJ7 |
Brand | Crown Automotive |
---|---|
Part # | C1Y83300061 |
Condition | New |
Warehouse | B |
Vehicle |
---|
1978 - Jeep Wagoneer |
Brand | Crown Automotive |
---|---|
Part # | C1YJ4004109 |
Condition | New |
Warehouse | B |
Vehicle | Block | CC | Position | Engine | CID |
---|---|---|---|---|---|
1978 - Jeep CJ7 | L | - | Front | 6 Cyl 3.8L | 232 |
Brand | MagnaFlow Performance Exhaust |
---|---|
Part # | 94006 |
Condition | New |
Warehouse | C |
Vehicle | Block | CC | Position | Engine | Sub Model | CID |
---|---|---|---|---|---|---|
1978 - Jeep Cherokee | V | - | Front | 8 Cyl 5.9L | Base | 360 |
Brand | MagnaFlow Performance Exhaust |
---|---|
Part # | 94006 |
Condition | New |
Warehouse | C |
Hedman Hedders has been manufacturing quality headers in the USA since 1954, and they've been manufacturing Jeep headers for decades. Each set uses mild steel, smooth flowing, CNC mandrel bent tubes, that are hand-welded to ensure each pair is identical to the next. Hedman's unique, gasketless ball and socket collector design allows your exhaust system to bolt up to these GEN-3 AMC V8 headers, even if it is not perfectly aligned with the header collectors.
These uncoated, LONG-TUBE, Fenderwell-Exit headers fit 1972-1986 Jeep CJ5, CJ6 and CJ7 models with a 304-401 AMC V8. They are compatible with both manual and automatic transmission setups, and the long, smooth 1-3/4 in. tube, Dog-Leg port design provides excellent exhaust flow to let your CJ's Tall-Deck, AMC V8 engine breathe freely, and produce maximum torque to power you through virtually any trail.
These headers are uncoated, and ship from the factory with a temporary black paint that will burn off when submitted to normal operating temperatures. For protection against the element and lower underhood temperatures, these headers are also available with a silver or black ceramic-metallic finish.
Each set includes a pair of gaskets, header flange bolts and collector bolts. No collector gasket is needed.
Hedman Hedders is so confident in the quality of its headers that these headers are factory backed by a Limited Lifetime Warranty.
Vehicle | Transmission | Region | Fuel Type | Drive Type |
---|---|---|---|---|
1978 - Jeep CJ5 | Manual | United States | GAS | 4WD |
Brand | Hedman |
---|---|
Part # | H5699190 |
Condition | New |
Warehouse | B |
Hedman Hedders has been manufacturing quality headers in the USA since 1954, and they've been manufacturing Jeep headers for decades. Each set uses mild steel, smooth flowing, CNC mandrel bent tubes, that are hand-welded to ensure each pair is identical to the next. Hedman's unique, gasketless ball and socket collector design allows your exhaust system to bolt up to these Inline 6 AMC headers, even if it is not perfectly aligned with the header collectors.
These uncoated, 6-into-1, LONG-TUBE, headers fit 1972-1986 Jeep CJ5, CJ6 and CJ7 models with AMC's "torquey" 232-258 I6 engine. They are compatible with both manual and automatic transmission setups, and the long, smooth 1-1/2 in. tube design provides excellent exhaust flow to let your CJ's Inline 6 AMC engine exhale better, to pull out every bit of available torque and power you down any trail.
These headers are uncoated, and ship from the factory with a temporary black paint that will burn off when submitted to normal operating temperatures. For protection against the element and lower underhood temperatures, these headers are also available with a silver or black ceramic-metallic finish.
Each set includes a pair of gaskets, header flange bolts and collector bolts. No collector gasket is needed.
Hedman Hedders is so confident in the quality of its headers that these headers are factory backed by a Limited Lifetime Warranty.
Vehicle | Transmission | Region | Fuel Type | Drive Type |
---|---|---|---|---|
1978 - Jeep CJ7 | Automatic | United States | GAS | 4WD |
Brand | Hedman |
---|---|
Part # | H5699610 |
Condition | New |
Warehouse | B |
Hedman Hedders has been manufacturing quality headers in the USA since 1954, and they've been manufacturing these Jeep CJ, SB Chevy V8 engine swap specific header model for over 20 years. Each set uses mild steel, smooth flowing, CNC mandrel bent tubes, that are hand-welded to ensure each pair is identical to the next. Hedman's unique, gasketless ball and socket collector design allows your Small Block Chevy exhaust system to bolt up, even if it is not perfectly aligned with the header collectors.
These uncoated, LONG-TUBE headers are designed specifically for installing a Small Block Chevy 283-400 (Gen 1) engine into a 1976-1986 Jeep CJ5, CJ6 and CJ7. The smooth 1-5/8 in. tube design provides ample exhaust flow to let your CJ's transplanted 283-400 SB Chevy engine breathe easy, and produce maximum torque to power you through virtually any trail.
These headers were designed in conjunction with Trans-Dapt Performance Products' #4100 engine mount kit, and to avoid possible header installation issues, it is recommended that the headers be ihnstalled with the Trans-Dapt #4100 engine mounts.<\p>
These headers are uncoated, and ship from the factory with a temporary black paint that will burn off when submitted to normal operating temperatures. For protection against the element and lower underhood temperatures, these headers are also available with a silver or black ceramic-metallic finish.
Each set includes a pair of gaskets, header flange bolts and collector bolts. No collector gasket is needed.
Hedman Hedders is so confident in the quality of its headers that these headers are factory backed by a Limited Lifetime Warranty.
Vehicle | Transmission | Region | Fuel Type | Drive Type |
---|---|---|---|---|
1978 - Jeep CJ7 | Manual | United States | GAS | 4WD |
Brand | Hedman |
---|---|
Part # | 69510 |
Condition | New |
Hedman Hedders has been manufacturing quality headers in the USA since 1954, and they've been manufacturing these Jeep CJ, SB Chevy V8 engine swap specific header model for over 20 years. Each set uses mild steel, smooth flowing, CNC mandrel bent tubes, that are hand-welded to ensure each pair is identical to the next. Hedman's unique, gasketless ball and socket collector design allows your Small Block Chevy exhaust system to bolt up, even if it is not perfectly aligned with the header collectors.
These uncoated, LONG-TUBE headers are designed specifically for installing a Small Block Chevy 283-400 (Gen 1) engine into a 1976-1986 Jeep CJ5, CJ6 and CJ7. The smooth 1-5/8 in. tube design provides ample exhaust flow to let your CJ's transplanted 283-400 SB Chevy engine breathe easy, and produce maximum torque to power you through virtually any trail.
These headers were designed in conjunction with Trans-Dapt Performance Products' #4100 engine mount kit, and to avoid possible header installation issues, it is recommended that the headers be ihnstalled with the Trans-Dapt #4100 engine mounts.<\p>
These headers are uncoated, and ship from the factory with a temporary black paint that will burn off when submitted to normal operating temperatures. For protection against the element and lower underhood temperatures, these headers are also available with a silver or black ceramic-metallic finish.
Each set includes a pair of gaskets, header flange bolts and collector bolts. No collector gasket is needed.
Hedman Hedders is so confident in the quality of its headers that these headers are factory backed by a Limited Lifetime Warranty.
Vehicle | Transmission | Region | Fuel Type | Drive Type |
---|---|---|---|---|
1978 - Jeep CJ7 | Automatic | United States | GAS | 4WD |
Brand | Hedman |
---|---|
Part # | 69510 |
Condition | New |