Image
Product
Price
- Universal Catalytic Converter - 2.00in.
- CARB Executive Order D-193-96 Engine Family Number VFJ2.2VJGKEK ; Certification Level : TIER1 OE Spec Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.00in.
- 2in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Orientation: Angled
- Inlet Diameter: 2
- Heat Shield Attached: No
- Body Width: 5.25
- Overall Length: 11.25
- Body Type: Clam Shell
- Body Height: 3.5
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Angled
- Body Shape: Oval
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Air Tube Adaptable: No
- Body Length: 7.75
- Outlet Diameter: 2
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1997 - Subaru Impreza | H | 2212 | Front | 4 Cyl 2.2L | - |
- Universal Catalytic Converter - 2.00in.
- CARB Executive Order D-193-96 Engine Family Number VFJ2.2VJG2EK ; Certification Level : TLEV OE Spec Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.00in.
- 2in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Orientation: Angled
- Inlet Diameter: 2
- Heat Shield Attached: No
- Body Width: 5.25
- Overall Length: 11.25
- Body Type: Clam Shell
- Body Height: 3.5
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Angled
- Body Shape: Oval
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Air Tube Adaptable: No
- Body Length: 7.75
- Outlet Diameter: 2
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1997 - Subaru Legacy | H | 2212 | Front | 4 Cyl 2.2L | - |
- Universal Catalytic Converter - 2.00in.
- CARB Executive Order D-193-96 Engine Family Number VFJ1.8VJGFEK ; Certification Level : TIER1 OE Spec Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.00in.
- 2in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Orientation: Angled
- Inlet Diameter: 2
- Heat Shield Attached: No
- Body Width: 5.25
- Overall Length: 11.25
- Body Type: Clam Shell
- Body Height: 3.5
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Angled
- Body Shape: Oval
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Air Tube Adaptable: No
- Body Length: 7.75
- Outlet Diameter: 2
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1997 - Subaru Impreza | H | 1781 | Front | 4 Cyl 1.8L | - |
- 2.25 in.; Includes Mufflers/Hardware/4 in. Single Round Rolled Angle-Cut Tip; Single Rear Exit;50 State Legal / California Emissions Compliant T-304 Stainless Steel
- S-Type Axle-Back Exhaust System; 2.25 in.; Includes Mufflers/Hardware/4 in. Single Round Rolled Angle-Cut Tip; Single Rear Exit;
- S-Type Axle-Back Exhaust System
- Product Attributes:
- Tail Pipe Diameter: 2.250 In.
- Tail Pipe Material: Stainless Steel
- Tubing Diameter: 2.250 In.
- Exhaust Type:
- Axle-back
- Single
- Muffler Type: Chambered
- Exit Position: Rear
- System Type: Axle Back
- WARNING CA Proposition 65: Yes
- Exit Style: Straight
- Inlet Inside Diameter: 2.250 In.
- Outlet Outside Diameter: 2.250 In.
-
Features:
- Made From High-Quality T-304 Austenitic Stainless Steel
- Mandrel Bent Pipes
- Ensures Consistent Diameter Through Each Curve
- Mufflers Have No Baffles/Chambers
- Produces High Velocity
- Million Mile Warranty
- Borla Performance has once again proven why we have a led the aftermarket performance exhaust industry for over 40 years. Borla Performance Industries; the original pioneers of high quality; austinetic stainless steel free flow exhaust utilizes patented award and race winning technology to deliver quality, sound, performance gains, and enhanced fuel economy. All with an easy bolt on installation. All Borla street products carry an unsurpassed written million-mile warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1997 - Subaru Legacy | H | 2458 | 4 Cyl 2.5L | GT | - |
- Universal Catalytic Converter - 2.00in.
- Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.00in.
- Universal HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2
- Heat Shield Attached: Yes
- Body Width: 4.375
- Overall Length: 13
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 4.375
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Heat Shield Included: Yes
- Outlet Orientation: Straight
- Body Shape: Round
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Air Tube Adaptable: No
- Body Length: 9
- Outlet Diameter: 2
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1997 - Subaru SVX | H | 3318 | Front Left | 6 Cyl 3.3L | - |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Cylinder Head to Y-pipe
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Subaru Impreza | H | 1781 | 4 Cyl 1.8L | - |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Cylinder Head to Y-pipe
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Subaru Legacy | H | 2458 | 4 Cyl 2.5L | - |
- Exhaust Manifold Gasket Set
- FEL-PRO MS 95088 Exhaust Manifold Gasket Set
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
0378019, 0951334, 14038-AA000, 18616, MS12392
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Subaru Legacy | H | 2458 | 4 Cyl 2.5L | - |
- Standard Grade Universal Catalytic Converter-2.00in.
- Standard Series; 2 in. Tubing/Inlet/Outlet; Overall L-13.00 in.; Not Air Tube Kit Adaptable;Not Legal For Sale Or Use On Vehicles Registered In CA Cutting And Welding Required During Installation
- Universal Catalytic Converter-2.00in.
- 91000 Series OBDII Compliant Universal Catalytic Converter
- Product Attributes:
- Inlet Diameter: 2.000 In.
- WARNING CA Proposition 65: No
- Body Width: 5.500 In.
- Outlet Attachment Type: Weld-on
- Body Height: 3.750 In.
- Recommended Use: Converter
- Body Material: Stainless Steel
- Heat Shield Included: Yes
- Inlet Type: Weld-on
- Air Tube Adaptable: No
- Body Length: 9.000 In.
- California Air Resources Board (CARB): No
- Catalytic Converter Format: Pre-catalytic Converter And Main Catalytic Converter
- Outlet Diameter: 2.000 In.
- Oxygen Sensor Location: None
- Heat Shield Attached: Yes
- Overall Length: 13.000 In.
- Subtitles: Federal / Epa Compliant
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.000 In.
- Outlet Outside Diameter: 2.000 In.
- Main Piping Diameter: 2.000 In.
- Converter Body Size: Oem
- Catalytic Converter Air Tube Adapter: Not Air Tube Kit Adaptable
- Body Shape: Oval
- Core Substrate Material: Ceramic
- Sensor Port Count: 0
- Emission: Non-california (49-state)
- Inlet Attachment Type: Weld-on
- Outlet Type: Weld-on
-
Features:
- For Small To Medium Weight Vehicles
- Compact Size
- Perfect For A Variety Of Import And Domestic
- MagnaFlow specializes in superior catalytic converter and exhaust technology and has spent the past 30+ years earning its reputation as a global market leader. American engineered and manufactured, MagnaFlow Catalytic Converters combine efficient industrial design to produce a product that exceeds, rather than meets, the highest standards of product performance and efficiency in the industry. MagnaFlow uses both Ceramic and Metallic substrates with different combinations of cell density and wall thickness to meet vehicle specific requirements. MagnaFlow Universal Catalytic Converters form the basic building blocks for a comprehensive line of direct-fit applications. The main benefit of the universal catalytic converter is that one unit may cover a wide variety of vehicle makes and models. Installing universal converters often requires the use of welding, cutting and tube bending equipment that is readily available to most professional installers.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1997 - Subaru Impreza | H | 1781 | Rear | 4 Cyl 1.8L | Brighton | - |
- Standard Series; 2 in. Tubing/Inlet/Outlet; Overall L-13.00 in.; Not Air Tube Kit Adaptable;Not Legal For Sale Or Use On Vehicles Registered In CA Cutting And Welding Required During Installation
- 91000 Series OBDII Compliant Universal Catalytic Converter
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1997 - Subaru Impreza | H | 1781 | Rear | 4 Cyl 1.8L | Brighton | - |
Showing 1 - 10 of 35 products
Loading...