Image
Product
Price
Additional Fitment Information:
| Vehicle |
|---|
| 2001 - Jaguar XKR |
- Fuel filters - trans cooler pipes - power steering hoses - etc
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Jaguar S-Type | V | 3996 | 8 Cyl 4.0L | 244 |
Additional Fitment Information:
| Vehicle | Position | Chassis Range |
|---|---|---|
| 2001 - Jaguar S-Type | Front Right | up to M10264 |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Jaguar S-Type | V | 3996 | 8 Cyl 4.0L | 244 |
- Reman Complete Long Rack
- w/o Outer Tie Rod Ends
Additional Fitment Information:
| Vehicle |
|---|
| 2001 - Jaguar XJ8 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Line Assembly - HP
- Pump to Rack
Additional Fitment Information:
| Vehicle |
|---|
| 2001 - Jaguar XJ8 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Line Assembly - HP
Additional Fitment Information:
| Vehicle |
|---|
| 2001 - Jaguar XJR |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Line Assembly - HP
- METAL Line From Pump to Secondary Rubber Hose portion - Includes Pressure Switch .Original hose was a Two Pressure Hose Configuration, IF YOU ARE REPLACING BOTH THE RUBBER AND METAL HOSE TO THE STEERING RACK AND THE SHORT METAL PIPE TO THE PUMP ORDER XR8 33363. Requires XR8 29166 O-Ring Also use (1) XR8 3924 and (1) XR8 3579 Hose fittings
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2001 - Jaguar S-Type | V | 2968 | Hose To Rack | 6 Cyl 3.0L | 181 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Line Assembly - HP
- Pressure Switch - Includes metal portion of the original hose. - Switch may have to be transferred to the new hose if the car is equipped with the 1 piece updated hose - See XR8 33363 if you need to replace the hose
- METAL Line From Pump to Secondary Rubber Hose portion - Includes Pressure Switch .Original hose was a Two Pressure Hose Configuration, IF YOU ARE REPLACING BOTH THE RUBBER AND METAL HOSE TO THE STEERING RACK AND THE SHORT METAL PIPE TO THE PUMP ORDER XR8 33363. Requires XR8 29166 O-Ring Also use (1) XR8 3924 and (1) XR8 3579 Hose fittings
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Jaguar S-Type | V | 2968 | 6 Cyl 3.0L | 181 |
- AKA: Steering Knuckle/Vertical Link - Includes Ball joint
- AKA: Steering Knuckle/Verticle Link
- Front - Right
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2001 - Jaguar S-Type | Front Right |
Showing 1 - 10 of 50 products
Loading...