Image
Product
Price
- Oil Cooler
- Product Attributes:
- Inlet Fitting Inside Diameter: 0.315
- Overall Width: 7.41 In
- Package Contents: Power Steering Cooler
- Length: 35.5
- Outlet Fitting Inside Diameter: 0.394
- Inlet Fitting Outside Diameter: 0.315
- Outlet Fitting Outside Diameter: 0.394
- Height: 2.64
-
Features:
- Direct replacement - this power steering cooler is designed to match the fit and function of the original cooler on specified vehicles
- Ideal solution - this power steering cooler is a reliable replacement for a failed original cooler
- Durable construction - made from quality, corrosion-resistant components to ensure reliable performance and long service life
- Trustworthy quality - backed by a team of product engineers based in the United States
- This power steering cooler is designed to match the fit and function of the original cooler on specified vehicles. Made of quality materials, it is engineered for reliable performance and durability.
This Part Fits the Following OEM/Substitute Numbers:
15009093, SKTOC049
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Isuzu Ascender | L | - | 6 Cyl 4.2L | 256 |
- Tie Rod End
- MOOG ES3676 Tie Rod End
- Product Attributes:
- End 2 Thread Pitch: 2.0
- Dust Boot Included: Yes
- End 2 Thread Diameter: 14.0
- End 1 Thread Direction: Clockwise
- End 1 Gender: Male
- Greaseable: Yes
- End 1 Thread Diameter: 16.0
- End 1 Thread Pitch: 1.5
- End 2 Gender: Male
- Length - Stud Center to End: 11.090
-
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Isuzu Ascender | Right Outer |
- Tie Rod End
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG ES3676 Tie Rod End
- Product Attributes:
- End 2 Thread Pitch: 2.0
- Dust Boot Included: Yes
- End 2 Thread Diameter: 14.0
- End 1 Thread Direction: Clockwise
- End 1 Gender: Male
- Greaseable: Yes
- End 1 Thread Diameter: 16.0
- End 1 Thread Pitch: 1.5
- End 2 Gender: Male
- Length - Stud Center to End: 11.090
-
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
101-6756, 26100287, 269-3224, 401-1887B, 4011887, 45A0887, 46A0887A, 534-709, 612.66032, 61366032, 8261002870, ES3676, ES4080, ES4080E, JTE1288, MES3676, TO90044, TO91092...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Isuzu Ascender | Right Outer |
- Tie Rod End
- MOOG ES3675 Tie Rod End
- Product Attributes:
- End 2 Thread Pitch: 2.0
- Dust Boot Included: Yes
- End 2 Thread Diameter: 14.0
- End 1 Thread Direction: Clockwise
- End 1 Gender: Male
- Greaseable: Yes
- End 1 Thread Diameter: 16.0
- End 1 Thread Pitch: 1.5
- End 2 Gender: Male
- Length - Stud Center to End: 11.090
-
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Isuzu Ascender | Left Outer |
- Tie Rod End
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG ES3675 Tie Rod End
- Product Attributes:
- End 2 Thread Pitch: 2.0
- Dust Boot Included: Yes
- End 2 Thread Diameter: 14.0
- End 1 Thread Direction: Clockwise
- End 1 Gender: Male
- Greaseable: Yes
- End 1 Thread Diameter: 16.0
- End 1 Thread Pitch: 1.5
- End 2 Gender: Male
- Length - Stud Center to End: 11.090
-
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
101-6508, 26100286, 269-3223, 401-1886B, 4011886, 45A0886, 46A0886A, 534-708, 612.66031, 61366031, 8261002860, ES3675, ES4079, ES4079E, JTE1280, MES3675, TO90043, TO91091...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Isuzu Ascender | Left Outer |
- Tie Rod End
- MOOG EV80965 Tie Rod End
- Product Attributes:
- End 2 Gender: Male
-
Features:
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Wrench flats on housing and stud provide easy installation and alignment adjustment
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
101-5598, 26100288, 269-3225, 401-1888B, 4011888, 45A0888, 46A0888A, 535-322, 612.66033, 61366033, 8261002880, ES4081, ES4081E, ES80965, EV80965, JAR1138, MEV80965, TI90060...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Isuzu Ascender | Inner |
- Tie Rod End
- MOOG ES800464 Tie Rod End
- Product Attributes:
- End 2 Thread Pitch: 1.5
- Dust Boot Included: Yes
- End 2 Thread Diameter: 14.0
- End 1 Thread Direction: Clockwise
- End 2 Thread Direction: Clockwise
- End 1 Gender: Female
- Greaseable: Yes
- End 1 Thread Diameter: 16.0
- End 1 Thread Pitch: 1.5
- End 2 Gender: Female
- Length - Stud Center to End: 4.540
-
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Isuzu i-290 | Outer |
- Tie Rod End
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG ES800464 Tie Rod End
- Product Attributes:
- End 2 Thread Pitch: 1.5
- Dust Boot Included: Yes
- End 2 Thread Diameter: 14.0
- End 1 Thread Direction: Clockwise
- End 2 Thread Direction: Clockwise
- End 1 Gender: Female
- Greaseable: Yes
- End 1 Thread Diameter: 16.0
- End 1 Thread Pitch: 1.5
- End 2 Gender: Female
- Length - Stud Center to End: 4.540
-
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
101-7650, 19152655, 2693471, 4012134, 45A1390, 534-900, 612.66036, 8191526550, ES4347, ES800464, JTE1257, MES800464, TO91115
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Isuzu i-290 | Outer |
- Steering Tie Rod End
- 16 mm Thread at Outer End
-
Features:
- Trustworthy replacement - this steering tie rod end assembly directly replaces the original equipment on specific vehicle applications
- Durably designed - factory-sealed and precision-forged housing resists future corrosion
- Reliably engineered - built to decrease wear rate and ensure overall strength
- Trustworthy quality - backed by team of professional engineers and quality control specialists in the United States
- This steering tie rod end directly replaces the original equipment tie rod on specific vehicle applications. It has undergone an industry-leading evaluation process to ensure smooth, safe operation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1017068, 1303031, 19152664, 45A1350, 612.66034, ES4351, ES800300, EV800300, JAR1178, MS50728, TA5504
Additional Fitment Information:
| Vehicle | Position | Front Spring | Drive Type |
|---|---|---|---|
| 2007 - Isuzu i-370 | Front Inner | Torsion Bar | RWD |
- Power Steering Oil Cooler
- Power Steering Oil Cooler
- Pwr Strg Oil Cooler
- Product Attributes:
- Depth IN: 0.750
- Height IN: 2.500
- Outlet Size IN: 0.375
- Connector Fitting: 3/8
- Fittings Included?: Included
- Hose Length FT: 4.500
- Length IN: 9.000
- Gasket / Seals?: Not Included
- Mounting Hardware?: Included
- Description: Power Steering Oil Cooler
- Hose Size Number: 11/32
- Contains Spring?: Not Included
- Row Quantity: 2
- With Electric Fan?: Not Included
- O.E. Replacement?: No
- Bracket?: Not Included
This Part Fits the Following OEM/Substitute Numbers:
1009, 11153019, 13213, 14866, 1534157, 212, 241009, 53019, 6919, 77430, 911009, CWK911009
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - Isuzu i-290 |
Showing 1 - 10 of 60 products
Loading...