2021 Chrysler Suspension Parts
Choose a Model for your 2021 Chrysler
Image
Product
Price
- Coil Capacity Increase 15-30 Percent; Fill Out Coil SumoSprings Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 1.68 in.
- Coil SumoSprings; Coil Capacity Increase 15-30 Percent; Fill Out Coil SumoSprings Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 1.68 in.;
- Coil SumoSprings
-
Features:
- Sold as a pair left and right
- Requires no maintenance
- Proudly made in the U.S.A.
- Fit Both Front And Rear Coil Springs
- Coil SumoSprings Simply Slide Between The Turns Of Coil Springs
- Enhance Front Suspension When Fitting Snow Plow/Winch/Bumper
- Enhance Rear Suspension When Adding Tow Hitch
- Reduces Side To Side Body Roll And Front End Dip
- Produced From SumoSprings Closed Cell Microcellular Urethane
- Progressive Spring Rate
- Coil Capacity Increased By 15 To 30 Percent
- Typical Installation Completed In Less Than 30 Minutes
- Never Load Any Vehicle Beyond The Manufacturers GVWR
- Coil SumoSprings(R) improve the load leveling ability of original equipment front and rear coil springs. Manufactured from micro-cellular urethane, the material's progressive spring rate creates a cushion effect, enhancing capacity and ride comfort. They install by simply being slid between the turns of the coil spring.
Additional Fitment Information:
| Vehicle | Sub Model | Drive Type |
|---|---|---|
| 2021 - Chrysler Pacifica | Touring | FWD |
- Coil Capacity Increase 15-30 Percent; Fill Out Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 1.68 in.
- Coil SumoSprings; Coil Capacity Increase 15-30 Percent; Fill Out Coil SumoSprings Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 1.68 in.;
- Coil SumoSprings
-
Features:
- Sold as a pair left and right
- Requires no maintenance
- Proudly made in the U.S.A.
- Fit Both Front And Rear Coil Springs
- Coil SumoSprings Simply Slide Between The Turns Of Coil Springs
- Enhance Front Suspension When Fitting Snow Plow/Winch/Bumper
- Enhance Rear Suspension When Adding Tow Hitch
- Reduces Side To Side Body Roll And Front End Dip
- Produced From SumoSprings Closed Cell Microcellular Urethane
- Progressive Spring Rate
- Coil Capacity Increased By 15 To 30 Percent
- Typical Installation Completed In Less Than 30 Minutes
- Never Load Any Vehicle Beyond The Manufacturers GVWR
- Coil SumoSprings(R) improve the load leveling ability of original equipment front and rear coil springs. Manufactured from micro-cellular urethane, the material's progressive spring rate creates a cushion effect, enhancing capacity and ride comfort. They install by simply being slid between the turns of the coil spring.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2021 - Chrysler Pacifica | Front | Touring L | FWD |
- Suspension Lateral Arm
- Toe Link
- Product Attributes:
- Ball Joint Included: No
- Control Arm Type: Casting/forged
- Grade Type: Regular
- Mounting Hardware Included: No
- Package Contents: 1 Arm
- Bushing Color: Black
- Mounting Hole Diameter: 12.2
- Pre Greased: No
- Length: 494.6
- End 1 Type: Bushing
- Item Grade: Standard
- Bushings Included: Yes
- Attachment Type: Press In
- Mount Stud Quantity: 0
- End 2 Type: Mounting Hole
- Adjustable: No
- Bushing Material: Rubber
- Ball Joint Installed: No
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
This Part Fits the Following OEM/Substitute Numbers:
1506115, 2606505, 2606509, 4782537AB, 4782937AA, 4782937AB, 4782947AC, 68051639AA, 68051639AB, CA1237, CA1259, CA81547, CA81547PR, CB25132, CB25136, CMS251010, CMS251014, MS251010...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Chrysler 300 | Rear Left Lower Rearward |
- Suspension Lateral Arm
- Toe Link
- Product Attributes:
- Ball Joint Included: No
- Control Arm Type: Casting/forged
- Mounting Hardware Included: No
- Package Contents: 1 Arm
- Bushing Color: Black
- Mounting Hole Diameter: 12.2
- Pre Greased: No
- Length: 494.6
- End 1 Type: Bushing
- Item Grade: Standard
- Bushings Included: Yes
- Attachment Type: Bolt In
- Mount Stud Quantity: 0
- End 2 Type: Mounting Hole
- Adjustable: No
- Bushing Material: Rubber
- Ball Joint Installed: No
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
This Part Fits the Following OEM/Substitute Numbers:
1506114, 2606506, 2606510, 4782536AB, 4782936AA, 4782936AB, 4782946AC, 68051638AA, 68051638AB, CA1238, CA1260, CA81548, CA81548PR, CB25133, CB25137, CMS251011, CMS251015, MS251011...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Chrysler 300 | Rear Right Lower Rearward |
- Suspension Lateral Arm
- Camber Link
- Product Attributes:
- Ball Joint Included: No
- Control Arm Type: Casting/forged
- Grade Type: Regular
- Mounting Hardware Included: No
- Package Contents: Control Arm
- Bushing Color: Black
- Mounting Hole Diameter: 12.2
- Pre Greased: No
- Length: 321.8
- End 1 Type: Bushing
- Item Grade: Standard
- Bushings Included: Yes
- Attachment Type: Bolt In
- Grease Fitting Included: No
- Mount Stud Quantity: 0
- End 2 Type: Mounting Hole
- Adjustable: No
- Bushing Material: Rubber
- Ball Joint Installed: No
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
This Part Fits the Following OEM/Substitute Numbers:
1506122, 2606506, 4895543AA, 5180564AA, 5180566AA, 624.63020, 68184782AB, 68241572AB, CA81518, CA81518PR, CMS251013, RK640722, RK641519, RK642576, WC1-12750
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Chrysler 300 | Rear Right Upper Rearward |
- Suspension Control Arm
- Product Attributes:
- Ball Joint Included: Yes
- Control Arm Type: Casting/forged
- Grade Type: Regular
- Mounting Hardware Included: Yes
- Package Contents: Suspension Control Arm And Ball Joint Assembly
- Mounting Hole Diameter: 12.3
- Bushings Included: Yes
- Control Arm Material: Steel
- Ball Joint Stud Type: Threaded
- Control Arm Maximum Length: 237
- Grease Fitting Included: No
- Adjustable: No
- Pre-Greased: Yes
- Suspension Grade Type: Light
- Ball Joint Mounting Type: Press In
- Ball Joint Thread Diameter: 14
- Control Arm Color: Black
- Control Arm Maximum Width: 288.5
- Bushing Material: Rubber
- Ball Joint Installed: Yes
-
Features:
- Trustworthy replacement - this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair - each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering - underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed - additional coatings offer long-lasting rust and corrosion resistance
- This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
This Part Fits the Following OEM/Substitute Numbers:
2608477, 5168282AB, CB81444, CB81444PR, CMS251163, NI, TC6013, WC1-14054
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2021 - Chrysler 300 | Front Right Lower | AWD |
- Coil Capacity Increase 15-30 Percent; Fill Out Coil SumoSprings Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 1.45 in.
- Coil SumoSprings; Coil Capacity Increase 15-30 Percent; Fill Out Coil SumoSprings Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 1.45 in.;
- Coil SumoSprings
-
Features:
- Sold as a pair left and right
- Requires no maintenance
- Proudly made in the U.S.A.
- Fit Both Front And Rear Coil Springs
- Coil SumoSprings Simply Slide Between The Turns Of Coil Springs
- Enhance Front Suspension When Fitting Snow Plow/Winch/Bumper
- Enhance Rear Suspension When Adding Tow Hitch
- Reduces Side To Side Body Roll And Front End Dip
- Produced From SumoSprings Closed Cell Microcellular Urethane
- Progressive Spring Rate
- Coil Capacity Increased By 15 To 30 Percent
- Typical Installation Completed In Less Than 30 Minutes
- Never Load Any Vehicle Beyond The Manufacturers GVWR
- Coil SumoSprings(R) improve the load leveling ability of original equipment front and rear coil springs. Manufactured from micro-cellular urethane, the material's progressive spring rate creates a cushion effect, enhancing capacity and ride comfort. They install by simply being slid between the turns of the coil spring.
Additional Fitment Information:
| Vehicle | Sub Model | Drive Type |
|---|---|---|
| 2021 - Chrysler Pacifica | Pinnacle | FWD |
- Coil Capacity Increase 15-30 Percent; Fill Out Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 1.45 in.
- Coil SumoSprings; Coil Capacity Increase 15-30 Percent; Fill Out Coil SumoSprings Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 1.45 in.;
- Coil SumoSprings
-
Features:
- Sold as a pair left and right
- Requires no maintenance
- Proudly made in the U.S.A.
- Fit Both Front And Rear Coil Springs
- Coil SumoSprings Simply Slide Between The Turns Of Coil Springs
- Enhance Front Suspension When Fitting Snow Plow/Winch/Bumper
- Enhance Rear Suspension When Adding Tow Hitch
- Reduces Side To Side Body Roll And Front End Dip
- Produced From SumoSprings Closed Cell Microcellular Urethane
- Progressive Spring Rate
- Coil Capacity Increased By 15 To 30 Percent
- Typical Installation Completed In Less Than 30 Minutes
- Never Load Any Vehicle Beyond The Manufacturers GVWR
- Coil SumoSprings(R) improve the load leveling ability of original equipment front and rear coil springs. Manufactured from micro-cellular urethane, the material's progressive spring rate creates a cushion effect, enhancing capacity and ride comfort. They install by simply being slid between the turns of the coil spring.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2021 - Chrysler Pacifica | Rear | Touring | FWD |
- Suspension Control Arm
- Product Attributes:
- Ball Joint Included: Yes
- Control Arm Type: Casting/forged
- Grade Type: Regular
- Mounting Hardware Included: Yes
- Package Contents: Suspension Control Arm And Ball Joint Assembly
- Mounting Hole Diameter: 12.3
- Bushings Included: Yes
- Control Arm Material: Steel
- Ball Joint Stud Type: Threaded
- Control Arm Maximum Length: 237
- Grease Fitting Included: No
- Adjustable: No
- Pre-Greased: Yes
- Suspension Grade Type: Light
- Ball Joint Thread Diameter: 14
- Control Arm Color: Black
- Control Arm Maximum Width: 288.5
- Bushing Material: Rubber
- Ball Joint Installed: Yes
-
Features:
- Trustworthy replacement - this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair - each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering - underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed - additional coatings offer long-lasting rust and corrosion resistance
- This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2021 - Chrysler 300 | V | 3604 | Front Left Lower Forward | 6 Cyl 3.6L | RWD | 220 |
- Suspension Control Arm
- wo/High Performance Suspension
- Product Attributes:
- Ball Joint Included: Yes
- Control Arm Type: Casting/forged
- Grade Type: Regular
- Mounting Hardware Included: Yes
- Package Contents: Suspension Control Arm And Ball Joint Assembly
- Mounting Hole Diameter: 12.3
- Bushings Included: Yes
- Control Arm Material: Steel
- Ball Joint Stud Type: Threaded
- Control Arm Maximum Length: 237
- Grease Fitting Included: No
- Adjustable: No
- Pre-Greased: Yes
- Suspension Grade Type: Light
- Ball Joint Thread Diameter: 14
- Control Arm Color: Black
- Control Arm Maximum Width: 288.5
- Bushing Material: Rubber
- Ball Joint Installed: Yes
-
Features:
- Trustworthy replacement - this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair - each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering - underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed - additional coatings offer long-lasting rust and corrosion resistance
- This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
This Part Fits the Following OEM/Substitute Numbers:
1506109, 2607225, 4670509AD, 4670509AE, 4670509AF, 5168653AC, CB81473, CB81473PR, CK620258, CK622225, CMS251123, MS251123, SK522801, TC5738, WC1-12801
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2021 - Chrysler 300 | V | - | Front Left Lower Forward | 8 Cyl 5.7L | RWD | 345 |
Showing 1 - 10 of 150 products
Loading...