2005 Chrysler Engine Coolant Thermostat Parts
Choose a Model for your 2005 Chrysler
Image
Product
Price
- Thermostat-195 Degrees
- Temperature 195F OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 1.89
- Flange Thickness: 0.05 In
- Jiggle Pin Weep Hole: Yes
- Temperature (Degree): 195
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12T107E, 14789, 1601-290250, 33952, 36789, 387-195, 4573560AC, 465-195, 46789, 4789, 4789-TS, 56595, 68210217AA, 9465195, P4789, QRT38
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - Chrysler Voyager | V | 3301 | 6 Cyl 3.3L | 201 |
- Thermostat-195 Degrees
- Temperature 195F Includes thermostat and seal Thermostat only OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 1.81
- Flange Thickness: 0.05 In
- Gasket/Seal Material: Rubber
- Jiggle Pin Weep Hole: Yes
- Temperature (Degree): 195
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - Chrysler PT Cruiser | L | 2429 | 4 Cyl 2.4L | 148 |
- Thermostat-195 Degrees
- Temperature 195F Includes thermostat and seal OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 1.81
- Flange Thickness: 0.05 In
- Gasket/Seal Material: Rubber
- Jiggle Pin Weep Hole: Yes
- Temperature (Degree): 195
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12T57E, 14209, 15209, 1601-24339, 208, 33849, 340-195, 34095, 34299, 35209, 4209, 4495721, 4573560, 4573560AB, 4573560AE, 4663565, 5278144AA, 9340195...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - Chrysler Sebring | L | 2429 | 4 Cyl 2.4L | 148 |
- Thermostat-180 Degrees
- Temperature 180F Includes thermostat and seal Alternate Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 1.81
- Flange Thickness: 0.05 In
- Gasket/Seal Material: Rubber
- Jiggle Pin Weep Hole: Yes
- Temperature (Degree): 180
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12T57D, 1601-24338, 180-043, 340-180, 34080, 4208, 9340180, NI, P4208
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - Chrysler Sebring | L | 2429 | 4 Cyl 2.4L | 148 |
- Thermostat-180 Degrees
- Temperature 180F Includes thermostat and seal Thermostat only Alternate Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 1.81
- Flange Thickness: 0.05 In
- Gasket/Seal Material: Rubber
- Jiggle Pin Weep Hole: Yes
- Temperature (Degree): 180
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - Chrysler PT Cruiser | L | 2429 | 4 Cyl 2.4L | 148 |
- Thermostat-192 Degrees
- Temperature 190F Includes seal OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.2
- Flange Thickness: 0.05 In
- Bypass Diameter: 1.18 In
- Gasket/Seal Material: Rubber
- Jiggle Pin Weep Hole: Yes
- Bypass Length: 1.60 In
- Temperature (Degree): 192
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12T91E, 14389, 1601-90716, 33921, 33993, 36389, 384-190, 422-190, 42290, 48239, 52290, 9422190, MD328070, P42290, QRT46
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Engine VIN | CID |
|---|---|---|---|---|---|
| 2005 - Chrysler Sebring | L | 2351 | 4 Cyl 2.4L | G | - |
- Dodge Charger / Challenger Hemi Racing Thermostat, 2006-2012
- Racing Thermostat, fits Dodge Charger/Challenger 5.7L/6.1L/6.4L Hemi 2006-2019
- Product Attributes:
- SellingPoint04: Mishimoto Lifetime Warranty
- SellingPoint05: N/a
- SellingPoint06: N/a
- SellingPoint07: N/a
- SellingPoint01: Fits The 2006-2019 Dodge Charger/challenger Hemi
- SellingPoint02: Activates At Lower Temperature So Coolant Flows Through System Earlier
- SellingPoint03: Allows For Cooler Engine Temperatures
- TechSpec Chassis Codes: N/a
- SellingPoint08: N/a
- SellingPoint09: N/a
- TechSpec OEM Activation Temperature (F): 203
- SellingPoint10: N/a
- TechSpec Note: N/a
- Prop 65 (C, R or CR): Cr
- SellingPoint15: N/a
- Install Difficulty: 2
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: 5.7l Hemi--6.1l Hemi--6.4l Hemi
- SellingPoint13: N/a
- SellingPoint14: N/a
- Prop 65 - Short Label: Prop65_warning.jpg
- TechSpec Applications: 2005-2019 Chrysler 300 5.7l/6.1l/6.4l--2007-2009 Chrysler Aspen 5.7l--2008-2019 Dodge Challenger 5.7l/6.1l/6.4l--2006-2019 Dodge Charger 5.7l/6.1l/6.4l--2004-2019 Dodge Durango 5.7l--2005-2008 Dodge Magnum 5.7l/6.1l--2003-2019 Dodge Ram 1500 5.7l--2003-20
- TechSpec Includes: (1) Mishimoto Thermostat--mishimoto Lifetime Warranty
- TechSpec Mishimoto Activation Temperature (F): 180
- Your high-performance Hemi needs a reliable and effective cooling system to extend engine life and perform at its absolute best.Mishimoto is proud to introduce a racing thermostat specifically designed for the 5.7L/6.1L/6.4L Hemi engine.Mishimoto racing thermostats promote greater cooling efficiency by significantly decreasing high engine temperatures.Once the engine is fully warmed up, the Mishimoto low-temperature racing thermostat will open at a lower temperature (180 F) compared to standard thermostats (203 F).This allows coolant to flow through the engine sooner, thus reducing and maintaining cooler engine temperatures.Whether your vehicle is stock, cammed, or blown, the Mishimoto racing thermostat will provide superior cooling efficiency to keep your vehicle on the road and out of the shop.As with all our products, this thermostat includes the Mishimoto lifetime warranty.
Additional Fitment Information:
| Vehicle | Region | Sub Model |
|---|---|---|
| 2005 - Chrysler 300 | United States | C |
- Dodge Charger / Challenger Hemi Racing Thermostat, 2006-2012
- Racing Thermostat, fits Dodge Charger/Challenger 5.7L/6.1L/6.4L Hemi 2006-2019
- Product Attributes:
- SellingPoint04: Mishimoto Lifetime Warranty
- SellingPoint15: N/a
- SellingPoint05: N/a
- SellingPoint06: N/a
- SellingPoint07: N/a
- Install Difficulty: 2
- SellingPoint11: N/a
- SellingPoint01: Fits The 2006-2019 Dodge Charger/challenger Hemi
- SellingPoint12: N/a
- TechSpec Engine Codes: 5.7l Hemi--6.1l Hemi--6.4l Hemi
- SellingPoint02: Activates At Lower Temperature So Coolant Flows Through System Earlier
- SellingPoint13: N/a
- SellingPoint03: Allows For Cooler Engine Temperatures
- SellingPoint14: N/a
- TechSpec Chassis Codes: N/a
- SellingPoint08: N/a
- SellingPoint09: N/a
- TechSpec Applications: 2005-2019 Chrysler 300 5.7l/6.1l/6.4l--2007-2009 Chrysler Aspen 5.7l--2008-2019 Dodge Challenger 5.7l/6.1l/6.4l--2006-2019 Dodge Charger 5.7l/6.1l/6.4l--2004-2019 Dodge Durango 5.7l--2005-2008 Dodge Magnum 5.7l/6.1l--2003-2019 Dodge Ram 1500 5.7l--2003-20
- TechSpec Includes: (1) Mishimoto Thermostat--mishimoto Lifetime Warranty
- TechSpec OEM Activation Temperature (F): 203
- SellingPoint10: N/a
- TechSpec Mishimoto Activation Temperature (F): 180
- TechSpec Note: N/a
- Your high-performance Hemi needs a reliable and effective cooling system to extend engine life and perform at its absolute best.Mishimoto is proud to introduce a racing thermostat specifically designed for the 5.7L/6.1L/6.4L Hemi engine.Mishimoto racing thermostats promote greater cooling efficiency by significantly decreasing high engine temperatures.Once the engine is fully warmed up, the Mishimoto low-temperature racing thermostat will open at a lower temperature (180 F) compared to standard thermostats (203 F).This allows coolant to flow through the engine sooner, thus reducing and maintaining cooler engine temperatures.Whether your vehicle is stock, cammed, or blown, the Mishimoto racing thermostat will provide superior cooling efficiency to keep your vehicle on the road and out of the shop.As with all our products, this thermostat includes the Mishimoto lifetime warranty.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2005 - Chrysler 300 | Limited |
- Thermostat-180 Degrees
- Temperature 180F OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.51
- Flange Thickness: 0.05 In
- Bypass Diameter: 1.18 In
- Jiggle Pin Weep Hole: Yes
- Bypass Length: 1.66 In
- Temperature (Degree): 180
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12T40D, 14128, 1601-290219, 165, 19300PR7A02, 19300PV1003, 19300PV1013, 19301PV1Y00, 19301R8AA00, 212001LA0A, 212001LA1A, 21200AD201, 302-180, 30280, 30720083, 307200832, 33878, 35128...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Engine VIN | CID |
|---|---|---|---|---|---|
| 2005 - Chrysler Sebring | V | 2972 | 6 Cyl 3.0L | H | 181 |
- Fail-Safe Thermostat-180 Degrees
- "The patented Fail-Safe (R) thermostat is the only thermostat on the market designed to lock in the open position, allowing coolant to continue to flow in the event of overheating." Temperature 180F OEM Recommended Temp
- Fail-Safe
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.51
- Flange Thickness: 0.068 In
- Bypass Diameter: 1.18 In
- Jiggle Pin Weep Hole: No
- Bypass Length: 1.66 In
- Temperature (Degree): 180
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
1601-291006, 7302-180, 73028, 97302180, NI, P7302-180, SS180-2037
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Engine VIN | CID |
|---|---|---|---|---|---|
| 2005 - Chrysler Sebring | V | 2972 | 6 Cyl 3.0L | H | 181 |
Showing 1 - 10 of 41 products
Loading...