Image
Product
Price
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1997 - Volkswagen EuroVan | V | 2771 | Center | 6 Cyl 2.8L | - |
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1997 - Volkswagen EuroVan | L | 2390 | Center | 5 Cyl 2.4L | 146 |
- Chas: -000 800, Dual Hanger Mount Clam Shape
- Dual Hanger Design
Additional Fitment Information:
| Vehicle | Position | Chassis Range |
|---|---|---|
| 1997 - Volkswagen Cabrio | Center | up to 000 800 |
- Single Hanger Mount Oval Shape Also use 1, 1H0 253 144C mount and 2, N 010 242 22 (8x25mm) bolts.
- These mufflers have two bracket and are intended to accomodate the retrofit application models. The hanger should not interfere with installation Description of "HANGER": A 'Straight Bar' under the front part of muffler = one hanger (original design); while a Hook' design has been added, making it a Dual design; Ansa accomodated both in one w/o compromising install
- Single Hanger Design
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1997 - Volkswagen Cabrio | Center |
- Single Hanger Mount Oval Shape
- These mufflers have two bracket and are intended to accomodate the retrofit application models. The hanger should not interfere with installation Description of "HANGER": A 'Straight Bar' under the front part of muffler = one hanger (original design); while a Hook' design has been added, making it a Dual design; Ansa accomodated both in one w/o compromising install
- Single Hanger Design
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1997 - Volkswagen Jetta | L | 1984 | Center | 4 Cyl 2.0L | 121 |
Additional Fitment Information:
| Vehicle | Position | Engine Designation |
|---|---|---|
| 1997 - Volkswagen Passat | Rear | AHU |
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1997 - Volkswagen EuroVan | L | 2390 | Center | 5 Cyl 2.4L | 146 |
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1997 - Volkswagen EuroVan | V | 2771 | Center | 6 Cyl 2.8L | - |
- 2.25 in. Center Inlet/Offset Outlet; Case Dimensions 4 in. x 9.75 in. x 17 in.; 23 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
- 50 Series™ Delta Flow Muffler; 2.25 in. Center Inlet/Offset Outlet; Case Dimensions 4 in. x 9.75 in. x 17 in.; 23 in. Overall Length; Aluminized Steel;
- 50 Series™ Delta Flow Muffler
- Product Attributes:
- Tip Quantity: 0
- Muffler Type: Reflection
- Outlet Position: Offset
- Inlet Diameter: 2.250 In.
- Sound Level: Moderate
- WARNING CA Proposition 65: No
- Fitment: Universal
- Body Width: 9.750 In.
- Inlet Type: Single Center
- Body Length: 17.000 In.
- Inlet Outside Diameter: 2.250 In.
- Inlet Connection Type: Pipe
- Outlet Diameter: 2.500 In.
- Mount Type: Uses New Hangers (not Included)
- Automotive Item Grade: High Performance
- Outlet Connection Type: Pipe
- Muffler Series: 50 Series Delta Flow
- Overall Length: 23.000 In.
- Inlet Inside Diameter: 2.250 In.
- Outlet Outside Diameter: 2.250 In.
- Main Piping Diameter: 2.250 In.
- Shape: Oval
- Inlet Position: Center
- Outlet Type: Single Center Outlet
-
Features:
- Durable Fully Welded 16ga Aluminized Steel
- 3 Year Limited Warranty
- Mild to Moderate Exterior Exhaust Tone
- Minimal Interior Resonance
- Excellent Choice For Street Rods Cars and Trucks
- Improved HP/TQ and Potential Mileage Improvement
- Race Proven Patented Delta Flow® Technology
- Premium Flowmaster Quality
- The three chamber design utilizes Flowmasters Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1997 - Volkswagen Jetta | L | 1984 | 4 Cyl 2.0L | GT | 121 |
- 50 Series™ Delta Flow Muffler
- 2.25 in. Center Inlet/Offset Outlet; Case Dimensions 4 in. x 9.75 in. x 17 in.; 23 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
- 50 Series™ Delta Flow Muffler; 2.25 in. Center Inlet/Offset Outlet; Case Dimensions 4 in. x 9.75 in. x 17 in.; 23 in. Overall Length; Aluminized Steel;
- 50 Series(TM) Delta Flow Muffler
- Product Attributes:
- Tip Quantity: 0
- Muffler Type: Reflection
- Outlet Position: Offset
- Inlet Diameter: 2.250 In.
- Sound Level: Moderate
- WARNING CA Proposition 65: No
- Fitment: Universal
- Body Width: 9.750 In.
- Inlet Type: Single Center
- Body Length: 17.000 In.
- Inlet Outside Diameter: 2.250 In.
- Inlet Connection Type: Pipe
- Outlet Diameter: 2.500 In.
- Mount Type: Uses New Hangers (not Included)
- Automotive Item Grade: High Performance
- Outlet Connection Type: Pipe
- Muffler Series: 50 Series Delta Flow
- Overall Length: 23.000 In.
- Inlet Inside Diameter: 2.250 In.
- Outlet Outside Diameter: 2.250 In.
- Main Piping Diameter: 2.250 In.
- Shape: Oval
- Inlet Position: Center
- Outlet Type: Single Center Outlet
-
Features:
- Durable Fully Welded 16ga Aluminized Steel
- 3 Year Limited Warranty
- Mild to Moderate Exterior Exhaust Tone
- Minimal Interior Resonance
- Excellent Choice For Street Rods Cars and Trucks
- Improved HP/TQ and Potential Mileage Improvement
- Race Proven Patented Delta Flow® Technology
- Premium Flowmaster Quality
- The three chamber design utilizes Flowmasters Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1997 - Volkswagen Jetta | L | 1984 | 4 Cyl 2.0L | GT | 121 |
Showing 1 - 10 of 10 products
Loading...