Image
Product
Price
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Acura RDX | Front |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Acura TSX | Front |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- This bearing is equipped with an internal ABS sensor magnet. Care must be taken during installation to insure that the sensor magnet is located on the correct side of the bearing housing. Failure to do so may cause a malfunction in the ABS system. For more info, refer to the appropriate section of your service manual or check with your local dealer.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Acura TSX | Front |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- This bearing is equipped with an internal ABS sensor magnet. Care must be taken during installation on vehicles with ABS to insure that the sensor magnet is located on the correct side of the bearing housing. Failure to do so may cause a malfunction in the ABS system. For more info, refer to the factory service information or check with your local dealer.
- Front
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Acura RDX | Front |
- Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
- Transit Auto
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive G3000 heat-flowed castings steel give our rotors the ideal balance between tensile and hardness and provide consistent wear, long life, and quiet operation
- SIM Exclusive low-resin Semi-Metallic formula eliminates brake fade and glazing for optimal braking power
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- INCLUDES: 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Top Quality Disc Brake Rotor (Both Side) + 1x Front Semi-Metallic SIM Brake Pad Set (Hardware Included)
- Kit variations : KBB-100158 KBB-101376 KBB-101681 KBB-101975 KBB-102310 KBB-115493 KBB-115570 KBB-115644 KBB-117711 KBB-118316 KBB-118576
This Part Fits the Following OEM/Substitute Numbers:
120.40046, 121.40046, 125674, 24886795, 248880666, 31275, 31519, 4886795, 48880666, 510073, 510098, 74886795, 748880666, 7656, 787, 96795, 980666, AG31275...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Acura TSX | Front |
- Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
- Transit Auto
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive G3000 heat-flowed castings steel give our rotors the ideal balance between tensile and hardness and provide consistent wear, long life, and quiet operation
- SIM Exclusive low-resin Semi-Metallic formula eliminates brake fade and glazing for optimal braking power
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- INCLUDES: 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Top Quality Disc Brake Rotor (Both Side) + 1x Front Semi-Metallic SIM Brake Pad Set (Hardware Included)
- Kit variations : KBB-100157 KBB-100998 KBB-101091 KBB-101178 KBB-101375 KBB-101680 KBB-101974 KBB-102309 KBB-117697 KBB-118281 KBB-118578
This Part Fits the Following OEM/Substitute Numbers:
120.40036, 121.40036, 125669, 24886711, 31257, 4886711, 510073, 510098, 74886711, 7857, 8392, 959, 96711, AD7857, AG31257, ASR-HO-574, BD125669, BR31257...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2008 - Acura CSX | Front | Touring |
- Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
- Transit Auto
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive Drill and Slot design for left or right installation
- SIM Exclusive low-resin Semi-Metallic formula eliminates brake fade and glazing for optimal braking power
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- INCLUDES: 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Coated Drilled Slotted DS-One Disc Brake Rotor (Both Side) + 1x Front Semi-Metallic SIM Brake Pad Set (Hardware Included)
- Kit variations : KBB-100158 KBB-101376 KBB-101681 KBB-101975 KBB-102310 KBB-102665 KBB-115493 KBB-115644 KBB-117711 KBB-118316 KBB-118576
This Part Fits the Following OEM/Substitute Numbers:
120.40046, 121.40046, 125674, 2164608, 24886795, 248880666, 31275, 31519, 4886795, 48880666, 510073, 510098, 74886795, 748880666, 7656, 787, 96795, 980666...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Acura TSX | Front |
- Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
- Transit Auto
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive Drill and Slot design for left or right installation
- PPF USA-engineered low-resin Semi-Metallic formula eliminates brake fade and glazing for optimal braking power
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- INCLUDES: 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Coated Drilled Slotted DS-One Disc Brake Rotor (Both Side) + 1x Front Semi-Metallic Positive Plus Brake Pad Set (Hardware Included)
- Kit variations : KBB-100158 KBB-101376 KBB-101681 KBB-101975 KBB-102310 KBB-102665 KBB-115570 KBB-115644 KBB-117711 KBB-118316 KBB-118576
This Part Fits the Following OEM/Substitute Numbers:
120.40046, 121.40046, 125674, 2164608, 24886795, 248880666, 31275, 31519, 4886795, 48880666, 510073, 510098, 74886795, 748880666, 7656, 787, 96795, 980666...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Acura TSX | Front |
- Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
- Transit Auto
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive Drill and Slot design for left or right installation
- Exclusive high-density ceramic formula for optimal braking power and quietness. Our formula provides unmatched braking power in hot or cold weather with optimal pad life
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- INCLUDES: 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Coated Drilled Slotted DS-One Disc Brake Rotor (Both Side) + 1x Front Ceramic TEC Brake Pad Set (Hardware Included)
- Kit variations : KBB-100158 KBB-101376 KBB-101681 KBB-101975 KBB-102310 KBB-102665 KBB-115493 KBB-115570 KBB-117711 KBB-118316 KBB-118576
This Part Fits the Following OEM/Substitute Numbers:
120.40046, 121.40046, 125674, 2164608, 24886795, 248880666, 31275, 31519, 4886795, 48880666, 510073, 510098, 74886795, 748880666, 7656, 787, 96795, 980666...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Acura TSX | Front |
- Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
- Transit Auto
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive G3000 heat-flowed castings steel give our rotors the ideal balance between tensile and hardness and provide consistent wear, long life, and quiet operation
- Exclusive high-density ceramic formula for optimal braking power and quietness. Our formula provides unmatched braking power in hot or cold weather with optimal pad life
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- INCLUDES: 2x Rear Kugel Wheel Bearing and Hub Assembly (Both Side) + 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Top Quality Disc Brake Rotor (Both Side) + 1x Front Ceramic TEC Brake Pad Set (Hardware Included) + 2x Rear Top Quality Disc Brak
- Kit variations : KBB-106171 KBB-106561 KBB-107643 KBB-107987 KBB-108328 KBB-117071 KBB-118046
This Part Fits the Following OEM/Substitute Numbers:
120.40046, 120.40047, 120.40061, 121.40046, 121.40047, 121.40061, 125670, 125674, 126209, 24886795, 24886849, 248880151, 248880666, 31275, 31286, 31316, 31519, 4886795...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2008 - Acura TL | Front and Rear | Base |
Showing 1 - 10 of 100 products
Loading...