Image
Product
Price
- ACOS Front Adjustable Coil Spacer
- MJ Comanche: Installation may require minor vehicle modifications. Wrangler TJ: Compatible with Rubicon and Unlimited models. XJ Cherokee: Installation may require minor vehicle modifications.
- Ride height adjustment has never been easier than with the Adjustable Coil Over Spacer (ACOS) for Jeep JT/XJ/ZJ. Whether you are adding clearance for larger tires, compensating for heavy accessories, or level out the vehicle at either corner, these fine threaded adjustable spacers provide convenient control of ride height without removing any suspension components. Front ride height can be adjusted safely between 1-3.5" and ACOS provides built-in bump stop extensions.
- In the box: ACOS Adjustable Coil Spring Spacers
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Installation Time: 2-3
- Diameter: N/a
- Horizontal Position: Front
- Installation Difficulty: Moderate
- Is Adjustable: Yes
- Title: Acos Front Adjustable Coil Spacer
- Height: 1-1/2" - 3-3/4"
-
Features:
- Variable length coil spring spacer allows convenient ride height adjustments without removing any suspension components
- Adjustable lift height from 1-1/2" to 3-3/4
- Compensates for uneven load distribution, spring settling, and sagging
- Instantly increases vehicle ride height upon installation for immediate benefits
- Eliminates need to replace coil springs to accommodate future modifications
- Technically advanced design and billet construction dramatically enhances suspension appearance
- New Dura-Thane isolators utilized to prevent noise transfer, and bump stops for durability
- Dial in ride height on your Jeep Wrangler TJ or LJ with JKS ACOS adjustable front coil spring spacers. The range of ride height adjustment is from 1-1/2" to 3-3/4" -- without taking apart suspension components. ACOS adjustable coil spring spacers compensate for uneven load distribution and spring settling. They can save you from having to replace coil springs as you add equipment weight. The high-tech, billet design looks great, too. Dura-Thane isolators prevent noise transfer.
Additional Fitment Information:
| Vehicle |
|---|
| 2005 - Jeep Wrangler (TJ) |
- Quicker Disconnect Sway Bar Links
- Min. Adjusted Length - 8" Max Adjusted Length - 11.625" *See Instructions for further details. Not compatible with aftermarket sway bars. Some vehicles may require extended front brake hoses or other modifications to compensate for additional suspension travel.
- Get up to 30% better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. Sold in pairs. JKS Quicker Disconnect sway bar end links fits various models and lift heights. See list below
- In the box: All Necessary Mounting / Installation Hardware Sway Bar Links
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 8.00
- For Use With Lift Heights: 2.5"-6"
- Installation Time: 1-2
- Horizontal Position: Front
- Installation Difficulty: Moderately Easy
- Is Adjustable: Yes
- Length: 8 To 11-5/8
- Maximum Adjusted Length: 11.625
- Title: Quicker Disconnect Sway Bar Links
- Installation Tools Requirements: 15/16" X 18tpi Tap; Angle Measuring Tool; Grease Gun With Zerk Fitting Coupler; Tie Rod End Separator (recommended); Torque Wrench; Wheel Bearing Grease
-
Features:
- Gain 30 percent more axle articulation by disconnecting your front sway bar
- Dramatically improve off-road performance on stock or modified Jeeps
- Variable length design adapts to your vehicle and future modifications
- Convenient grease fittings ensure easy bushing lubrication for smooth, silent operation
- Stainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces
- Spherical bushings provide unrestricted 360 degrees of rotation and 11 degrees of misalignment capability
- Get up to 30% better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. Sold in pairs.
Additional Fitment Information:
| Vehicle |
|---|
| 2005 - Jeep Wrangler TJ/LJ |
- Budget Motor Mount Lift
- Compatible with 4.2L, 4.0L or 2.5L engine only.
- The right way to install a body lift on your Jeep Wrangler YJ is with a JKS budget motor mount lift kit. Simple, 1 in. spacers raise OE front motor mounts on chassis. Improves rear driveline angle by tilting transfer case output shaft towards the rear axle. Re-aligns engine fan with radiator shroud for proper cooling efficiency. Retains OE rubber bushings for vibration absorption. Machined from solid premium T6061-T6 aluminum and anodized to prevent oxidation. The complete, bolt-on kit includes zinc-plated hardware. Compatible with 4.0L, 4.2L and 2.5L engines.
- In the box: All Necessary Mounting / Installation Hardware Motor Mount Lift Blocks
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Title: Budget Motor Mount Lift
- Height: 1"
-
Features:
- Simple, unique 1 in. spacer raises OE front motor mounts on chassis
- Improves rear driveline angles by tilting transfer case output shaft towards the rear axle
- Re-aligns engine fan with radiator shroud for maximum cooling efficiency
- Provides the benefits of raised motor mounts while retaining the soft OE rubber bushings for maximum vibration absorption
- Machined from a solid block of premium T061-T6 aluminum alloy and anodized to prevent oxidation
- Easily installed, bolt-on kit includes zinc-plated hardware for corrosion resistance
- Compatible with 4.0L, 4.2L and 2.5L engines
- The right way to install a body lift on your Jeep Wrangler YJ is with a JKS budget motor mount lift kit. Simple, 1 in. spacers raise OE front motor mounts on chassis. Improves rear driveline angle by tilting transfer case output shaft towards the rear axle. Re-aligns engine fan with radiator shroud for proper cooling efficiency. Retains OE rubber bushings for vibration absorption. Machined from solid premium T6061-T6 aluminum and anodized to prevent oxidation. The complete, bolt-on kit includes zinc-plated hardware. Compatible with 4.0L, 4.2L and 2.5L engines.
Additional Fitment Information:
| Vehicle |
|---|
| 2005 - Jeep Wrangler TJ/LJ |
- Spare Tire License Plate Mount
- TJ and YJ installations will require additional wiring for license plate light installation. Can be used on other application with spare carriers that have 5on4.5 or 5on5 lug patterns and a wheel hub diameter of at least 1.75".
- Relocate your JK, TJ, YJ Jeep Wrangler?s license plate to the center of the spare tire. A solution for aftermarket bumpers without license plate provisions it also eliminates potential damage typical in the stock position. Made from heavy duty, laser cut 10 ga. steel and powder coated. Includes high-quality waterproof polycarbonate license plate light with 2 high power SMD LEDs. Can be used on other applications with 5 on 4.5? or 5 on 5? lug patterns and a wheel hub diameter of at least 1.75". Works great!
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Horizontal Position: Rear
- Title: Spare Tire License Plate Mount
-
Features:
- Relocates license plate to the center of the spare tire, mounted off of the existing spare tire mount studs
- Works with stock and most aftermarket spare tire mounts
- Eliminates the factory plastic license plate mount
- Laser cut and CNC formed using 10 gauge steel
- Durable gloss black powder coat
- Includes high-quality waterproof polycarbonate license plate light with 2 high power SMD LEDs
- Relocate your JK, TJ, YJ Jeep Wrangler’s license plate to the center of the spare tire. A solution for aftermarket bumpers without license plate provisions it also eliminates potential damage typical in the stock position. Made from heavy duty, laser cut 10 ga. steel and powder coated. Includes high-quality waterproof polycarbonate license plate light with 2 high power SMD LEDs. Can be used on other applications with 5 on 4.5” or 5 on 5” lug patterns and a wheel hub diameter of at least 1.75". Works great!
Additional Fitment Information:
| Vehicle |
|---|
| 2005 - Jeep Wrangler TJ/LJ |
- Budget Motor Mount Lift
- Compatible with 4.2L, 4.0L or 2.5L engine only
- Budget Motor Mount Lift | Wrangler YJ / TJ
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Title: Budget Motor Mount Lift
-
Features:
- Simple, unique 1 in. spacer raises OE front motor mounts on chassis
- Improves rear driveline angles by tilting transfer case output shaft towards the rear axle
- Re-aligns engine fan with radiator shroud for maximum cooling efficiency
- Provides the benefits of raised motor mounts while retaining the soft OE rubber bushings for maximum vibration absorption
- Machined from a solid block of premium T061-T6 aluminum alloy and anodized to prevent oxidation
- Easily installed, bolt-on kit includes zinc-plated hardware for corrosion resistance
- Compatible with 4.0L, 4.2L and 2.5L engines
- The right way to install a body lift on your Jeep Wrangler YJ is with a JKS budget motor mount lift kit. Simple, 1 in. spacers raise OE front motor mounts on chassis. Improves rear driveline angle by tilting transfer case output shaft towards the rear axle. Re-aligns engine fan with radiator shroud for proper cooling efficiency. Retains OE rubber bushings for vibration absorption. Machined from solid premium T6061-T6 aluminum and anodized to prevent oxidation. The complete, bolt-on kit includes zinc-plated hardware. Compatible with 4.0L, 4.2L and 2.5L engines.
Additional Fitment Information:
| Vehicle | Region |
|---|---|
| 2005 - Jeep Wrangler | United States |
- Rear Track Bar Relocation Bracket
- Not compatible with right hand drive vehicles Requires 3.0 in. suspension lift or greater Vehicle must be equipped with CV-type driveshaft
- Rear Track Bar Relocation Bracket | Wrangler TJ and LJ
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Title: Rear Track Bar Relocation Bracket
-
Features:
- Heavy-duty reinforcement bracket attaches directly to factory track bar mount on axle housing
- Angled design corrects geometry on lifted vehicles with rotated axle housing or CV-type driveshaft
- Premium steel construction is laser cut, formed and folded for maximum strength
- Economical bolt-on solution minimizes risk of track bar failure on the trail
- Protective powder coat finish resists corrosion
- Correct Jeep Wrangler TJ or LJ rear suspension geometry with a JKS Rear Track Bar Relocation Bracket. The design compensates for improper track bar alignment / orientation after adjusting rotation of the axle housing. Requires at least a 3 inch suspension lift. Correction improves driveline angles after suspension has been lifted and a CV-type driveshaft installed. The heavy duty steel bracket attaches directly to factory track bar mount on your Jeep's axle housing. It relocates the mounting point 4.0 in. higher to reduce track bar operating angle and improve handling at speed. Eliminates binding and premature bushing wear. Minimizes risk of track bar failure. Protective powder coat finish resists corrosion.
Additional Fitment Information:
| Vehicle | Position | Region |
|---|---|---|
| 2005 - Jeep Wrangler | Rear | United States |
- Quicker Disconnect Sway Bar Links
- Not compatible with aftermarket sway bars Some vehicles may require extended front brake hoses or other modifications to compensate for additional suspension travel 2.5-6" Lift
- Quicker Disconnect Sway Bar Links | 2.5"-6.0" Lift | Wrangler TJ, Cherokee XJ, Comanche MJ & Grand Cherokee ZJ
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 8.00
- Installation Time: 1-2
- Installation Difficulty: Moderately Easy
- Maximum Adjusted Length: 11.625
- Title: Quicker Disconnect Sway Bar Links
- Installation Tools Requirements: 15/16" X 18tpi Tap; Angle Measuring Tool; Grease Gun With Zerk Fitting Coupler; Tie Rod End Separator (recommended); Torque Wrench; Wheel Bearing Grease
-
Features:
- Gain 30 percent more axle articulation by disconnecting your front sway bar
- Dramatically improve off-road performance on stock or modified Jeeps
- Variable length design adapts to your vehicle and future modifications
- Convenient grease fittings ensure easy bushing lubrication for smooth, silent operation
- Stainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces
- Spherical bushings provide unrestricted 360 degrees of rotation and 11 degrees of misalignment capability
- Get up to 30% better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. Sold in pairs.
Additional Fitment Information:
| Vehicle | Region |
|---|---|
| 2005 - Jeep Wrangler | United States |
- Adjustable Front Track Bar
- Not compatible with right hand drive vehicles 4"+ Lift Vehicles with Dana 30 axle, aftermarket diff. cover and less than 3.0 in. lift may require bump stop adjustment to prevent interference
- Adjustable Front Track Bar | 4"+ Lift | Wrangler TJ & LJ, Cherokee XJ & Comanche MJ, Grand Cherokee ZJ
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 32.91
- Installation Time: 2-3
- Installation Difficulty: Moderate
- Maximum Adjusted Length: 35.91
- Title: Adjustable Front Track Bar
- Suggested Starting Length: 33.00
-
Features:
- Fits vehicles with more than 4" Lift
- Superior quality replacement for original fixed length panhard rod
- Variable length design properly aligns axle housing with chassis and prevents undue stress on related components
- Fine adjustment threads enable ultra precise axle positioning
- Extremely strong DOM tube construction utilizes OE bends for correct geometry and clearance
- Spherical urethane bushing for unrestricted travel and premium rubber bushing for comfort and quietness
- Zinc plated and powder coated for protection from corrosion and debris
- Correct front axle centering on your lifted Jeep Wrangler TJ or LJ by installing a JKS Adjustable Track Bar. For use with Jeeps with a 4" plus lift, JKS front track bars feature rubber and poly bushings to isolate noise and vibration. CNC bent DOM tubing is powder coated and zinc coated. Vehicles with Dana 30 axle, aftermarket diff. cover and less than 3.0 in. lift may require bump stop adjustment to prevent interference.
Additional Fitment Information:
| Vehicle | Position | Region |
|---|---|---|
| 2005 - Jeep Wrangler | Front | United States |
- Adjustable Bump Stop Extensions
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Title: Adjustable Bump Stop Extensions
-
Features:
- Adjustable design ensures correct bump stop clearance for virtually any application
- Conveniently allows changes to bump stop clearance without removing coils from vehicle
- Easily compensates for vehicle changes, spring settling and sagging
- Ensures proper bump stop operation to prevent suspension from bottoming out
- Practical upgrade for inferior bump stop extensions and fixed-length designs
- Three unique sizes provide six possible lengths ranging from 3/4" to 4
- Increase your Jeep Wrangler TJ or LJ off-road performance with stackable rear bump stop spacers. This variable height landing pad spacer system ensures correct bump stop clearance for virtually any lift and tire combination. Includes three interlocking and interchangeable spacers. This solution allows you to tune for shock length, tire clearance, suspension bind and prevents damage to components from improper geometry. Conveniently allows for changes to bump stop clearance without removing coils from vehicle. It’s a practical upgrade for inferior bump stop extensions and fixed-length designs six possible length combinations - 0.75”, 1.25”, 2.00”, 2.75”, 3.25” 4.00”.
Additional Fitment Information:
| Vehicle | Region |
|---|---|
| 2005 - Jeep Wrangler | United States |
- 1.25" Body Lift
- 1.25" Body Lift | Wrangler TJ
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Title: 1.25" Body Lift
-
Features:
- Premium grade body lift kit provides 1.25 in. additional tire clearance without affecting spring rate or suspension geometry
- Raises vehicle body relative to chassis and drivetrain for minimal effect on center of gravity
- Vehicle specific design ensures proper fitment and safe, dependable operation
- Dura-Thane poly spacers encapsulate OE body mounts for ultra secure installation
- Includes soft urethane grill supports to prevent it from cracking under stress
- Easy to install kit includes all hardware necessary for each application
- Requires no modifications to fuel tank, air conditioning, radiator, or brakes, unlike other lift kits
- JKS makes it easy to lift your Jeep TJ body 1.25" for increased tire clearance. As opposed to a suspension lift kit, a body lift consists of puck-shaped spacers that raise the vehicle body in relation to the frame. Includes pucks and hardware. Bolt-on installation. Vehicle specific design ensures proper fitment and safe, dependable operation. Dura-Thane poly spacers encapsulate OE body mounts for ultra-secure installation. Includes soft urethane grill supports to prevent it from cracking under stress. Easy to install kit includes all hardware necessary for each application. Requires no modifications to fuel tank, air conditioning, radiator, or brakes.
Additional Fitment Information:
| Vehicle | Region |
|---|---|
| 2005 - Jeep Wrangler | United States |
Showing 1 - 10 of 23 products
Loading...