Image
Product
Price
- steel flywheel
- 6 Bolt ; 130 Teeth; 10.5 in. Borg/Beck And Diaphragm; Zero Balance
- Steel flywheel Chrysler 318-440/64-99/0 bal./except 360/6 bolt/130T/10.5 Borg/Beck/Diaphragm
- Steel Flywheel
-
Features:
- Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
- Surface Ground For Optimum Disc Mating Surface
- Strictly Factory Warranty Only
- The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1972 - Plymouth Fury | V | - | 8 Cyl 6.6L | 400 |
- aluminum flywheel
- 0 Balance; 168 Teeth
- Aluminum flywheel Chevy 1955-85/262-427/0 bal./168T
- Aluminum Flywheel
-
Features:
- Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
- .250 in. Thick Steel Friction Insert
- Surface Ground For Optimum Disc Mating Surface
- Strictly Factory Warranty
- The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1972 - Chevrolet P20 Van | V | - | 8 Cyl 5.7L | 350 |
- steel flywheel
- 168 Teeth; Zero Balance
- Steel flywheel Chevy 1955-85/262-427/0 bal./168T
- Steel Flywheel
-
Features:
- Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
- Surface Ground For Optimum Disc Mating Surface
- Strictly Factory Warranty Only
- The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1972 - Chevrolet Bel Air | V | 6588 | 8 Cyl 6.6L | 402 |
- steel flywheel
- 153 Teeth; 10.5 B/B And Diaphragm
- Lightweight Steel flywheel Chevy 305-350/63-85/0 balance/153T/10.5 B/B/Diaphragm
- Steel Flywheel
-
Features:
- Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
- Surface Ground For Optimum Disc Mating Surface
- Strictly Factory Warranty Only
- The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1972 - Chevrolet C10 Pickup | V | - | 8 Cyl 5.0L | 307 |
- pilot bushing/bearing
- 0.592 in. ID; 1.094 in. OD; 0.75 in. Length
- Pilot bushing/bearing AMC; General Motors; Jeep
- Product Attributes:
- Inside Diameter: 0.592 In.
- Outside Diameter: 1.094 In.
- Overall Length: 0.750 In.
-
Features:
- Pilot Bushing/Bearing
- Strictly Factory Warranty Only
- Premium replacement pilot bearings and bushings complete your clutch install for a long, trouble free life of operation.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1972 - Chevrolet Blazer | V | 5031 | 8 Cyl 5.0L | 307 |
- 10.5 x 1 1/8-10 Spline
- Replacement clutch set 1955-85 GM Diaphragm 10.5 x 1 1/8-10
- Replacement Clutch Set
-
Features:
- Replacement Clutch Set
- OEM Quality Replacement Components
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
- RAM replacement clutch sets use oem components for a hassle free installation. Each set includes the pressure plate, clutch disc, release bearing (where applicable), and alignment tool. These clutches are for use in stock vehicles used solely on the street.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1972 - Chevrolet Bel Air | V | - | 8 Cyl 6.6L | 400 |
- HDX clutch set
- 11 x 1 1/8-10 Spline
- HDX clutch set 1955-85 GM Diaphragm 11 x 1 1/8-10
- HDX Clutch Set
-
Features:
- Built With 30 Percent More Clamp Pressure Than Stock
- Smooth
- Chatter Free Operation
- Premium Organic Composite Disc Friction Material
- Exclusive 8-Spring Hub Assembly Where Applicable
- Great Drivability
- Use For Power Levels To 450 HP
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
- The basic RAM concept of clutch performance is simple: Increased clamp pressure is the single most effective way to manage high horsepower or load, especially in street driven performance cars. We purpose build RAM HDX pressure plates with 30% more clamp pressure than stock. The second important feature is smooth, chatter free operation, which we achieve with premium organic composite disc friction material. Also, HDX discs feature our exclusive 8-spring hub assembly for added load capacity. HDX. Great driveability and control for power levels to 450 horsepower. Sets include pressure plate, disc, release bearing, and alignment tool unless otherwise noted.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1972 - Chevrolet C10 Pickup | V | - | 8 Cyl 5.7L | 350 |
- 11 x 1 1/8-26 Spline
- Replacement clutch set 1955-85 GM 11 Diaphragm 1 1/8-26
- Replacement Clutch Set
-
Features:
- Replacement Clutch Set
- OEM Quality Replacement Components
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
- RAM replacement clutch sets use oem components for a hassle free installation. Each set includes the pressure plate, clutch disc, release bearing (where applicable), and alignment tool. These clutches are for use in stock vehicles used solely on the street.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 1972 - Chevrolet Chevelle | V | - | 8 Cyl 5.7L | Malibu | H | 350 |
- Size: 11 in.; 26 Spline By 1-1/8 in.; 168 Teeth Count
- Concept 10.5 dual disc 1 1/8-26; Chevy 168T
- Concept 10.5 Organic Dual Disc Clutch Assembly
-
Features:
- Clampload Of 2400 lbs
- 800-1200HP
- Smooth Engagement
- RAM Concept 10.5 dual disc clutches offer upgrades from existing designs while keeping your budget in mind. A 10.5 inch cover with 2400 pounds of clampload offers more holding power and a larger surface area to dissipate heat, while maintaining an easy pedal effort. The stronger, billet modular mounting ring is machined with multiple bolt patterns to adapt to most any flat flywheel. Larger, 10.5 inch discs are available in either organic or metallic friction material, and the top disc is spring dampened to soften engagement. RAM Concept 10.5 dual disc units ship with all high grade fasteners included to complete your install.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 1972 - Chevrolet Camaro | V | - | 8 Cyl 5.7L | Z28 | K | 350 |
- Powergrip HD Clutch set
- 11 x 1 1/8-26 Spline
- Powergrip HD clutch set 1955-85 GM 11 Diaphragm 1 1/8-26
- Powergrip HD Clutch Set
-
Features:
- True Strip/Street Competition Clutch System To The 650 HP Level
- 8 Spring Hum Is Equipped w/Ram Polycoil Damper Springs
- Sintered metallic Friction Material
- For Vehicles That See Frequent Track Duty
- Meets SFI Specifications
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
- POWERGRIP HD is a true "strip/street" competition clutch system that can handle the rigors of weekend racing and spirited street driving. This system has the same components as standard POWERGRIP above with the exception that the disc friction surfaces are both sintered iron. Sintered iron provides a degree of slippage on vehicle launch to prevent the violent and uncontrollable engagement characteristics of paddle type metallic discs. This firm consistent engagement is easy to control. Some chatter is likely on engagement with rear gearing less than 3.73 in street applications. Each set includes the pressure plate, clutch disc, release bearing, and alignment tool unless otherwise noted. Use Powergrip HD for power levels to 650 horsepower, or lower powered vehicles that see frequent track duty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 1972 - Chevrolet Camaro | V | - | 8 Cyl 5.7L | Base | H | 350 |
Showing 1 - 10 of 37 products
Loading...