Image
Product
Price
- Yukon Positraction internals for Dana 44 Dura Grip Posi; 30 spline.
- Dana 44; 30 Splines Dana 44; Non-Rubicon JK; 30 Splines~Dura Grip Posi Carrier Gear Kit
- Yukon Positraction internals for Dana 44 Dura Grip Posi; 30 spline. Does not include clutches. Does NOT fit Trac Loc or Power Lok. Fits Dura Grip ONLY.
- Spider Gear Set
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fits Dana Spicer 44 w/Dura Grip Positraction
- Spider Gear Kit
- Includes Two Side Gears
- Four Pinion Gears
- Cross Pin Shaft
- Roll Pin And Spider Gear Thrust Washers
- Yukon Gear & Axle spider gear kits utilize the highest quality materials and best production techniques in the industry to ensure a longer lasting spider gear set. Kit delivers everything needed for a complete and proper spider gear set replacement.
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - Jeep Wrangler |
- Yukon Rear Axle Bearing/Seal Kit for Dana 44JK
- Dana 44; One Side; Replacement Dana 44; JK Rubicon; One Side; Replacement~Dana 44; Non-Rubicon JK; One Side; Replacement~Dana 44 JK Rear; Axle Bearing and Seal; One Side; Replacement;
- Yukon axle bearing/seal kits are specially designed for each application/use all high quality bearings/seals.
- Axle Bearing/Seal Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Includes Axle Bearing And Seal
- Services One Side
- Yukon Provides Top Quality Replacement Bearings For Front And Rear Applications
- Yukon axle bearing and seal kits are specially designed for each application and use high-quality bearings and seals.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Jeep Wrangler | Rear |
- Yukon bearing install kit for Dana 44 JK non-Rubicon rear differential.
- Dana 44 Dana 44; Non-Rubicon JK; Rear
- Yukon Bearing installation kits are perfect for shops/builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit.
- Differential Bearing Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
-
Features:
- Fits Dana Spicer 44 JK Non-Rubicon Rear
- Includes Are Carrier Bearings/Races
- Pinion Bearings/Races
- Pinion Seal
- Crush Sleeve
- Includes Are Oil Baffles/Slingers
- Marking Compound/Brush
- Yukon Bearing Installation Kits are perfect for shops and builders who have shims on the shelf and are looking to save cost over a Master Overhaul Kit. This kit uses Timken bearings and races along with all high-quality small parts. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to properly install your ring and pinion gear set.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2008 - Jeep Wrangler | V | 3778 | Rear | 6 Cyl 3.8L | 4WD | 231 |
- Dana 44 3.73/Down Dura Grip Limited; Slip 30spl; IFS w/YSPSPR-001 Spring Kit
- GM 12 Bolt; 30 Spline; 3.73 And Down Dana 44; Non-Rubicon JK; 30 Spline; 3.73 And Down~Yukon Dura Grip Positraction; Dana 44 Rear. JK Non-Rubicon; 30 Spline;
- Dana 44 3.73/Down Yukon Dura Grip Limited Slip; 30 Spline; Will Fit Applications with Independent Front Suspension with YSPSPR-001 Spring Kit
- Dura Grip Positraction
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
-
Features:
- Fits Dana Spicer 44 w/30 Spline Axles
- Fits 3.73 Gear Ratio Down [Also Fits Thick Gears]
- Fully Rebuildable Design And Proudly Assembled In The USA
- Limited Slip Differential w/Composite Clutches
- All Units Are Backed By Extensive Product Testing And State-Of-The-Art Software Design
- Yukon Dura Grips Feature 4320 Chromoly Spider Gears For Ultimate Durability
- Gears Are Cut To Provide The Strongest Teeth Possible In Any Terrain
- Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains. The Dura Grip is engineered for long life and is completely rebuildable. Dura Grips are constructed with a high strength nodular case, forged 4320 chromoly spider gears, and composite clutches. For unmatched positraction performance, the Dura Grip is the ultimate choice. When your vehicle demands performance, durability and strength, choose Yukon Dura Grip.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2008 - Jeep Wrangler | V | 3778 | Rear | 6 Cyl 3.8L | RWD | 231 |
- Yukon Chromoly Rear Axle Kit; Dana 44; Jeep JK Non-Rubicon; 30 Spline; 32in. Lon
- Dana 44; Left Hand Or Right Hand; 30 Spline; 32 in. Long Dana 44; Non-Rubicon JK; Left Hand Or 30 Spline; 32 in. Long~Dana 44; JK Non-Rubicon; 4340 Chromoly Rear Axle Kit; 30 Spline; 32 in. Long; 5 x 5.0 in. Bolt Pattern; Includes Axle Bearing. Seal. Retainer. Studs. and ABS Ring (1 Side)
- Yukon performance axles are built with high-tensile strength 4340 chromoly; use superior production methods that include cold roll formed splines; and feature advanced heat treating to create an axle of unmatched quality and durability.
- Axle Shaft
- Product Attributes:
- Axle Type: Dana 44
- WARNING CA Proposition 65: No
-
Features:
- Fits Dana 44 Differential
- For Left Or Right Side
- Measures 32 in. Long
- 30 Spline
- 5 X 5.0 in. Bolt Pattern
- Heavy Duty 4340 Chromoly Construction
- Includes Axle Shaft
- Axle Bearing And Seal
- ABS Ring
- Retainer
- And Studs
- Yukon high-performance axles are built with high-tensile strength 4340 chromoly, use superior production methods that include cold roll formed splines, and feature advanced induction coil heat treating to create an axle of unmatched quality and durability.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2008 - Jeep Wrangler | Rear | Sahara |
- Yukon Chromoly Front Axle Kit; JK Rubicon Dana 44; 30/32 Spline; 7166 U-Joint
- Front; 4340 Chrome-Moly Replacement; 30 Spline Inner; 32 Spline Outer; Fits Dana 44; Includes Spicer U-Joints Dana 44; Reverse Rotation; 4340 Chrome-Moly Replacement; 30 Spline Inner; 32 Spline Outer; Fits Includes Spicer U-Joints~Dana 44. JK Rubicon; Front Axle Kit; 4340 Chrome-Moly; 30 Spline Inner; 32 Spline Outer; Includes Spicer U-Joints
- Yukon performance axles are built with high-tensile strength 4340 chromoly; use superior production methods that include cold roll formed splines; and feature advanced heat treating to create an axle of unmatched quality and durability.
- Axle Kit
- Product Attributes:
- Axle Type: Dana 44
- WARNING CA Proposition 65: No
-
Features:
- Fits Dana Spicer 44 in. JK Rubicon
- 30 Spline Inner And 32 Spline Outer
- Includes Inner And Outer 4340 Chromoly Axles And Spicer U-Joints
- Yukon high-performance axles are built with high-tensile strength 4340 chromoly, use superior production methods that include cold roll formed splines, and feature advanced induction coil heat treating to create an axle of unmatched quality and durability.
This Part Fits the Following OEM/Substitute Numbers:
ZA W24168
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2008 - Jeep Wrangler | Front Inner | Unlimited Rubicon |
- High performance Yukon Ring/Pinion gear set Dana 30 JK Short Rev Pinion; 4.56
- Dana 30; 4.56 Ratio; Short Reverse Dana 30; High Performance Replacement; Short Reverse Pinion; 4.56 Gear Ratio~Dana 30. JK Front; Short Reverse; Ring and Pinion Set; 4.56 Gear Ratio
- Yukon Gear/Axle high performance ring/pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat; and use high grade steel in both the ring/pinion; with fitment designed to OEM spec
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type:
- Dana 30
- Dana 30 Rev.
- Gear Ratio: 4.56
- WARNING CA Proposition 65: No
- Axle Type:
-
Features:
- Fits Reverse Rotation Dana Spicer 30 in. Jeep JK
- 24 Spline Pinion
- 4.56 Ratio
- 10 Ring Gear Bolts
- 7.33 in. Ring Gear Diameter
- Short Pinion
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
This Part Fits the Following OEM/Substitute Numbers:
ZG D30SR-456JK
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2008 - Jeep Wrangler | V | 3778 | Front | 6 Cyl 3.8L | Unlimited X | 231 |
- High performance Yukon Ring/Pinion gear set Dana 30 JK Short Rev Pinion 5.13
- Dana 30; 5.13 Ratio; Short Reverse Dana 30; Short Reverse Pinion; 5.13 Ratio~Dana 30. JK Front; Short Reverse; Ring and Pinion Set; 5.13 Gear Ratio
- Yukon Gear/Axle high performance ring/pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat; and use high grade steel in both the ring/pinion; with fitment designed to OEM spec
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type:
- Dana 30
- Dana 30 Rev.
- Gear Ratio: 5.13
- WARNING CA Proposition 65: No
- Axle Type:
-
Features:
- Fits Reverse Rotation Dana Spicer 30 in. Jeep JK
- 24 Spline Pinion
- 5.13 Ratio
- 10 Ring Gear Bolts
- 7.33 in. Ring Gear Diameter
- Short Pinion
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
This Part Fits the Following OEM/Substitute Numbers:
ZG D30SR-513JK
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2008 - Jeep Wrangler | V | 3778 | Front | 6 Cyl 3.8L | Unlimited X | 231 |
- Yukon Master Overhaul kit for Dana 30 reverse rotation diff for use with+07 JK
- Dana; For Use w/Reverse Rotation Diff Dana 30~Dana 30 JK Front; Differential Rebuild Kit; Timken Bearings; Includes Inner Axle Seals
- Yukon Master Overhaul kits give you all the high quality parts you need to start/finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
- Yukon Differential Master Overhaul Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
- Model:
- Dana 30 Reverse
- Dana 30 Standard
-
Features:
- Fits Dana Spicer 30 JK
- Includes Are Timken Bearings And Races Along w/High Quality Seals And Small Parts
- Includes Carrier Bearings/Races
- Pinion Bearings/Races
- Pinion Seal
- Axle Seals
- Complete Shim Kit
- Ring Gear Bolts
- Includes Pinion Nut
- Crush Sleeve
- Oil Baffles/Slingers
- Thread Locker
- Marking Compound w/Brush And Gasket
- Yukon Master Overhaul Kits give you all the high-quality parts you need to start and finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Yukon Master Overhaul Kits are the most comprehensive and complete kits on the market because Yukon does extensive research to ensure that every kit has everything you need for your application.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2008 - Jeep Wrangler | V | 3778 | 6 Cyl 3.8L | X | 231 |
- Yukon Chromoly Rear Axle Kit; Dana 44; Jeep JK Rubicon; RH; 32 Spline; 32.6in.
- Dana 44 Rear; 32.6 in. Long Dana 44. JK Rubicon; Right Rear Axle Kit; 32 5/8 in. Long; 5 x 5.0 in. Bolt Pattern; Includes Axle Bearing. Seal. Retainer. Studs. and ABS Ring (1 Side)
- Yukon performance axles are built with high-tensile strength 4340 chromoly; use superior production methods that include cold roll formed splines; and feature advanced heat treating to create an axle of unmatched quality and durability.
- Axle Shaft
- Product Attributes:
- Axle Type: Dana 44
- WARNING CA Proposition 65: No
-
Features:
- Fits Dana 44 Differential
- For Right-Hand Side
- Measures 32.6 in
- 32 Spline
- 5 X 5.0 in. Bolt Pattern
- Heavy Duty 4340 Chromoly Construction
- Includes Axle Bearing And Seal
- ABS Ring
- Retainer
- And Studs
- Yukon Gear & Axle offers an extensive line of general replacement and high-performance axles for passenger car, truck and SUV applications. High quality alloys and the latest in heat-treating technologies provide a stronger-than-stock axle for off-road, on the street, or at the track.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2008 - Jeep Wrangler | Rear Right | Rubicon |
Showing 1 - 10 of 266 products
Loading...