Image
Product
Price
- Intermediate Steering Shaft
- U-Joint
- Product Attributes:
- Mounting Hardware Included: No
- Package Contents: 1 Steering Shaft
- Length: 1.42
- Installation Instructions Included: No
- Spline Quantity: 27
-
Features:
- Precise fit - this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
- Safety tested - each design meets rigorous regulatory standards to ensure driver safety in a collision
- Trustworthy performance - built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
- Corrosion resistant - salt spray testing and premium coating help ensure future longevity
- This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.
This Part Fits the Following OEM/Substitute Numbers:
4526033031, JCCA92
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1996 - Toyota Camry | Lower |
- Tie Rod End
- MOOG ES3547 Tie Rod End
- Product Attributes:
- End 2 Thread Pitch: 1.5
- Dust Boot Included: Yes
- End 2 Thread Diameter: 14.0
- End 1 Thread Direction: Clockwise
- End 1 Gender: Female
- Greaseable: Yes
- End 1 Thread Diameter: 20.0
- End 1 Thread Pitch: 1.5
- End 2 Gender: Male
- Length - Stud Center to End: 8.650
-
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
101-4818, 269-3139, 269-3140, 401-1803, 401-1803B, 45046-39335, 45A0802, 45A0803, 46A0803A, 534-644, 612.44044, 61344044, ES3547, ES4023, ES4024, JTE796, MES3547, T3547...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1996 - Toyota 4Runner | Right Outer |
- Tie Rod End
- Includes Greasable Socket Design to Reduce Corrosion and Wear
- MOOG ES3547 Tie Rod End
- Product Attributes:
- End 2 Thread Pitch: 1.5
- Dust Boot Included: Yes
- End 2 Thread Diameter: 14.0
- End 1 Thread Direction: Clockwise
- End 1 Gender: Female
- Greaseable: Yes
- End 1 Thread Diameter: 20.0
- End 1 Thread Pitch: 1.5
- End 2 Gender: Male
- Length - Stud Center to End: 8.650
-
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1996 - Toyota 4Runner | Right Outer |
- Tie Rod End
- MOOG ES3548 Tie Rod End
- Product Attributes:
- End 2 Thread Pitch: 1.5
- Dust Boot Included: Yes
- End 2 Thread Diameter: 14.0
- End 1 Thread Direction: Clockwise
- End 1 Gender: Male
- Greaseable: Yes
- End 1 Thread Diameter: 20.0
- End 1 Thread Pitch: 1.5
- End 2 Gender: Male
- Length - Stud Center to End: 8.650
-
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
101-4434, 269-3139, 269-3140, 401-1802, 401-1802B, 4504739215, 45A0802, 45A0803, 46A0802A, 534-645, 612.44045, 61344045, ES3548, ES4023, ES4024, JTE800, MES3548, T3548...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1996 - Toyota 4Runner | Left Outer |
- Tie Rod End
- Includes Greasable Socket Design to Reduce Corrosion and Wear
- MOOG ES3548 Tie Rod End
- Product Attributes:
- End 2 Thread Pitch: 1.5
- Dust Boot Included: Yes
- End 2 Thread Diameter: 14.0
- End 1 Thread Direction: Clockwise
- End 1 Gender: Male
- Greaseable: Yes
- End 1 Thread Diameter: 20.0
- End 1 Thread Pitch: 1.5
- End 2 Gender: Male
- Length - Stud Center to End: 8.650
-
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1996 - Toyota 4Runner | Left Outer |
- Single Steering Damper Must Use with RS5573 Mounting Kit
- Rancho RS5000 Steering Damper
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1996 - Toyota T100 | Front | 4WD |
- Tie Rod End
- MOOG ES3306 Tie Rod End
- Product Attributes:
- Dust Boot Included: Yes
- End 2 Thread Diameter: 12.0
- End 1 Thread Direction: Clockwise
- End 1 Gender: Female
- Greaseable: Yes
- End 1 Thread Diameter: 15.0
- End 1 Thread Pitch: 1.5
- End 2 Gender: Female
- Length - Stud Center to End: 3.300
-
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1996 - Toyota Camry | Outer |
- Tie Rod End
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG ES3306 Tie Rod End
- Product Attributes:
- Dust Boot Included: Yes
- End 2 Thread Diameter: 12.0
- End 1 Thread Direction: Clockwise
- End 1 Gender: Female
- Greaseable: Yes
- End 1 Thread Diameter: 15.0
- End 1 Thread Pitch: 1.5
- End 2 Gender: Female
- Length - Stud Center to End: 3.300
-
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
03-56046, 101-4291, 101-6185, 269-2843, 356046, 401-1525, 401-1525B, 45046-29255, 4504609020, 4504609700, 45A0525, 46A0525A, 534-543, 612.44119, ES3306, ES3306E, JTE683, MES3306...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1996 - Toyota Camry | Outer |
- Tie Rod End
- MOOG EV433 Tie Rod End
- Product Attributes:
- End 2 Gender: Male
-
Features:
- EASY TO INSTALL -- Wrench flats on housing and stud provide easy installation and alignment adjustment
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
101-4435, 101-4460, 101-4462, 269-3192, 269-3220, 401-1855, 401-1883, 401-1883B, 4550339075, 45A0855, 45A0883, 46A0883A, 535-157, 612.44059, 61344059, ES3663, ES4084, EV433...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1996 - Toyota 4Runner | Inner |
- Power Steering Oil Cooler
- Power Steering Oil Cooler
- Pwr Strg Oil Cooler
- Product Attributes:
- Depth IN: 0.750
- Height IN: 2.500
- Outlet Size IN: 0.375
- Connector Fitting: 3/8
- Fittings Included?: Included
- Hose Length FT: 4.500
- Length IN: 9.000
- Gasket / Seals?: Not Included
- Mounting Hardware?: Included
- Description: Power Steering Oil Cooler
- Hose Size Number: 11/32
- Contains Spring?: Not Included
- Row Quantity: 2
- With Electric Fan?: Not Included
- O.E. Replacement?: No
- Bracket?: Not Included
This Part Fits the Following OEM/Substitute Numbers:
1009, 11153019, 13213, 14866, 1534157, 212, 241009, 53019, 6919, 77430, 911009, CWK911009
Additional Fitment Information:
| Vehicle |
|---|
| 1996 - Toyota Paseo |
Showing 1 - 10 of 395 products
Loading...