Image
Product
Price
- Active Off Road Bumpstops;
- Active Off Road Bumpstops
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Designed To Maximize Axle Travel
- Progressive Spring Rate
- Absorbs Energy
- Allows Smooth Axle Engagement
- Easy Installation
- Satisfaction Guarantee
- The Active Off-Road Bumpstops offer off-road enthusiasts greater control over their vehicles' suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable and quiet axle engagement and disengagement. Unlike the OEM bumpstops, Timbren uses superior natural rubber compound ensuring the Active Off-Road Bumpstops will continue to operate even after a lifetime of off-road abuse. Similar to our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee. The ABSTORSEQ replaces the rear bumpstops on the Toyota 4Runner, Toyota FJ Cruiser and the Toyota Landcruiser 100 Series. Install an off-road bumpstop kit and experience the difference.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Lexus GX460 | Rear |
- Weight Capacity 6000 lbs.
- Suspension Enhancement System; Weight Capacity 6000 lbs.; Rear;
- Suspension Enhancement System
- Product Attributes:
- Usage: Light Duty Truck
- Axle Style: N/a
-
Features:
- Eliminate Suspension Sag And Cushion Road Shock
- Reduce Sway And Improve Roll Stability
- Easy To Install With Basic Hand Tools
- Improves Roll Control
- Trouble And Maintenance Free
- Satisfaction Guarantee And Lifetime Warranty
- Used To Carry Heavy Cargo Or Towing Trailers
- Leaders In Rubber Spring Technology Since 1965
- Timbren Suspension Kits (SES Kits) are designed to enhance the suspension of your vehicle. Easiest to use: Rubber cushions absorb road shocks and automatically adjust to uneven loads or road conditions. Easiest to maintain: There are no airlines or fittings to allow leaks. Simply bolt the kit on and you are set for a lifetime of trouble free suspension.Easiest to install: There are no holes to drill, no airlines to route and SES Kits can be installed in a matter of minutes using basic hand tools. The softer ride quality of todays trucks and the mediocre suspensions found on most trailers can cause excessive trailer sway, instability and suspension settling.Timbrens high performance suspension packages will ensure added safety and peace of mind.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Lexus GX460 | Rear |
- B12 (Special) - Coil Spring Set
- For 150-200 lbs additional front weight Fits Bilstein 8112 shocks only Not for use with OEM style shocks
- Front Suspension Kit
- B12 (Special)
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Kit Contents: Pair Of Coil Springs, Pair Of Bump Stop Extension Washers
- Bilstein B12 (Special) suspension kits are designed to alter the vehicles ride height for optimum performance. Utilizing various different technologies to achieve the optimum ride height for a specific requirement. Bilstein B12 (Special) suspension kits provide the perfect combination of suspension dynamics, quality and aesthetics.
This Part Fits the Following OEM/Substitute Numbers:
53-291394
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2022 - Lexus GX460 | Front | Base |
- B12 (Special)-Suspension Kit
- Rear Lift Height: 1.5"
- Rear Suspension Kit
- B12 (Special)
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Kit Contents: Pair Of Coil Springs
-
Features:
- Designed To Alter Vehicles Ride Height For Optimum Performance
- Different Technologies Utilized To Achieve Optimum Ride Height
- The Perfect Combo Of Suspension Dynamics
- Quality And Aesthetics
- Bilstein B12 (Special) suspension kits are designed to alter the vehicles ride height for optimum performance. Utilizing various different technologies to achieve the optimum ride height for a specific requirement. Bilstein B12 (Special) suspension kits provide the perfect combination of suspension dynamics, quality and aesthetics.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2022 - Lexus GX460 | Rear | Base |
- B12 (Special)-Suspension Kit
- Rear Lift Height: 1.5" Heavy Load PKG; 400 lb Constant Weight
- Rear Suspension Kit
- B12 (Special)
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Kit Contents: Pair Of Coil Springs
-
Features:
- Designed To Alter Vehicles Ride Height For Optimum Performance
- Different Technologies Utilized To Achieve Optimum Ride Height
- The Perfect Combo Of Suspension Dynamics
- Quality And Aesthetics
- Bilstein B12 (Special) suspension kits are designed to alter the vehicles ride height for optimum performance. Utilizing various different technologies to achieve the optimum ride height for a specific requirement. Bilstein B12 (Special) suspension kits provide the perfect combination of suspension dynamics, quality and aesthetics.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2022 - Lexus GX460 | Rear | Base |
- B8 6112 - Suspension Kit
- Front Lift Height: 0-2.8"
- Front Suspension Kit
- B8 6112
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Boot Included: No
- Internal Design: Monotube
- Reservoir: No
- Body Design: Snap Ring Grooved Body (coilover)
- Body Diameter (ID): 60mm
- Spring Seat Included: Yes
- Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.
This Part Fits the Following OEM/Substitute Numbers:
47-259768
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2022 - Lexus GX460 | Front | Base |
- B12 (Special)-Suspension Kit
- Rear Lift Height: 1"
- Rear Suspension Kit
- B12 (Special)
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Kit Contents: Pair Of Coil Springs
-
Features:
- Designed To Alter Vehicles Ride Height For Optimum Performance
- Different Technologies Utilized To Achieve Optimum Ride Height
- The Perfect Combo Of Suspension Dynamics
- Quality And Aesthetics
- Bilstein B12 (Special) suspension kits are designed to alter the vehicles ride height for optimum performance. Utilizing various different technologies to achieve the optimum ride height for a specific requirement. Bilstein B12 (Special) suspension kits provide the perfect combination of suspension dynamics, quality and aesthetics.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2022 - Lexus GX460 | Rear | Base |
- B8 5100 (Ride Height Adjustable) - Suspension Shock Absorber
- Front Lift Height: 0-2.5"
- 46mm Monotube Shock Absorber
- B8 5100 (Ride Height Adjustable)
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Internal Design: Monotube
- Upper Mount Type: Stem
- Extended Length (MM): 566.8
- Reservoir: No
- Body Design: Snap Ring Grooved Body (coilover)
- Spring Seat Included: Yes
- Collapsed Length (MM): 444.6
- Boot Included: Black Straight
- Lower Mount Type: Eye 14.2mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Bilstein B8 5100 (Ride Height Adjustable) shock absorbers are designed for trucks and SUVs with a front OE coilover style suspension. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-3 inches of front lift with OE springs (depending on application). The monotube shock absorbers feature a 46mm digressive piston a with self-adjusting deflective disc valve setting. Bilstein B8 5100 (Ride Height Adjustable) shock absorbers provide increased wheel travel and improved handling. Utilizing a B8 5100 (Ride Height Adjustable) shock absorber is the easiest way to level out your vehicle.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
24-196499
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2022 - Lexus GX460 | Front | Base |
- Camber Adjusting Kit
- From Minus 1-3/4 to Plus 1-3/4 Degrees of Change Single Offset Adjuster with 17 (mm) Bolts
- MOOG K90477 Camber Adjusting Kit
-
Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
13325A, 264-3645, 41217, 45K18039, 616-1039, 6161028, 756501, AA3645, MS86017, VV13325A
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Lexus UX250h | Front |
- Weight Capacity 1800 lbs.
- Suspension Enhancement System; Weight Capacity 1800 lbs.; Front;
- Suspension Enhancement System
- Product Attributes:
- Usage: Light Duty Truck
- Axle Style: N/a
-
Features:
- Eliminate Suspension Sag And Cushion Road Shock
- Reduce Sway And Improve Roll Stability
- Easy To Install With Basic Hand Tools
- Improves Roll Control
- Trouble And Maintenance Free
- Satisfaction Guarantee And Lifetime Warranty
- Used To Carry Heavy Cargo Or Towing Trailers
- Leaders In Rubber Spring Technology Since 1965
- Timbren Suspension Kits (SES Kits) are designed to enhance the suspension of your vehicle. Easiest to use: Rubber cushions absorb road shocks and automatically adjust to uneven loads or road conditions. Easiest to maintain: There are no airlines or fittings to allow leaks. Simply bolt the kit on and you are set for a lifetime of trouble free suspension.Easiest to install: There are no holes to drill, no airlines to route and SES Kits can be installed in a matter of minutes using basic hand tools. The softer ride quality of todays trucks and the mediocre suspensions found on most trailers can cause excessive trailer sway, instability and suspension settling.Timbrens high performance suspension packages will ensure added safety and peace of mind.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Lexus GX460 | Front |
Showing 1 - 10 of 251 products
Loading...