1960 Chevrolet Transmission Parts
Choose a Model for your 1960 Chevrolet
Image
Product
Price
- Centerforce(R) Accessories; Clutch Pilot Bearing
- 0.715 in. Height; 1.094 in. Major Outside Diameter; 0.615 in. Inside Diameter
- Each pilot bearing or bushing sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement.
- Pilot Bearing
- Product Attributes:
- Inside Diameter: 0.612 In.
- WARNING CA Proposition 65: Yes
- Outside Diameter: 1.094 In.
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
- Overall Length: 0.720 In.
-
Features:
- Pilot Bearing
- Pilot bearing or bushing sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement. Centerforce recommends changing the pilot bearing/bushing and release bearing during every clutch install.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1960 - Chevrolet El Camino | V | 4638 | 8 Cyl 4.6L | 283 |
- Centerforce(R) Accessories; Throw Out Bearing/Clutch Release Bearing
- Flat Face; 0.665 in. Height; 2.740 in. Major Outside Diameter; 1.380 in. Inside Diameter; Groove Retension
- Each Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement.
- Throwout Bearing
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
-
Features:
- Throwout Bearing
- Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement. Centerforce recommends changing the pilot bearing/bushing and release bearing during every clutch install.
Additional Fitment Information:
| Vehicle |
|---|
| 1960 - Chevrolet Corvette |
- SST 10.4; Clutch and Flywheel Kit
- 10.4 in. Dia.; 1 1/8 in.; 10 Spline; 925 ft/lbs Torque Cap.; Solid Full Face Organic Twin Disc/Floater/Pilot Bearing/Bolts/Alignment Tool
- The Centerforce(R) SST (Solid Street Twin) 10.4 Inch multi-disc clutch offers smooth engagement; light pedal; and high-end holding capacity for engine torque levels from 400 to 925 ft/lbs.
- Centerforce I Clutch And Flywheel Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning - Includes Nickel - Cancer. Www.p65warnings.ca.gov.
-
Features:
- 10.4 in. Diameter
- Introducing the NEW Centerforce(R) SST (Solid Street Twin). The SST clutch system has been engineered and developed for vehicles producing 400 to 925 ft/lbs of torque. The SST 10.4 in. discs utilize solid hubs (possible gear noise) to reduce the rotational weight on the input shaft for quick clean shifts. The discs in this assembly are built using high quality friction materials, for smooth engagement and longevity. The SST features a lightened billet steel flywheel, providing low inertia resulting in quicker RPM and the Centerforce anti-rattle system to reduce floater rattle/noise. No complicated setup or adjustments required, just bolt it in and "Get a Grip". The Centerforce SST includes a billet steel flywheel, 2 discs, floater plate, pressure plate, pilot bearing, alignment tool, and ARP pressure plate and flywheel hardware. The SST clutch system is an economical choice for streetcar enthusiasts looking for a complete high-quality twin disc clutch system. This new clutch assembly can be used for everyday use and spirited days on the track.
Additional Fitment Information:
| Vehicle |
|---|
| 1960 - Chevrolet Corvette |
- Dual Friction(R); Clutch Pressure Plate and Disc Set
- 10.4 in. Dia.; 2 Bolt Pattern; 10 Spline; 1 1/8 in. Input Shaft; 590ft/lbs Torque; Includes Pressure Plate/Clutch Disc
- The Centerforce Dual Friction(R) Clutch Series uses patented technologies for an ultimate pressure plate and disc combination.
- Dual Friction® Clutch Pressure Plate And Disc Set
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
-
Features:
- Patented Centrifugal Weight Design [where Applicable]
- Patented Dual Friction[r] Design
- Patented Ball Bearing Pressure Plate [where Applicable]
- Light Pedal Effort
- High Quality Friction Material
- Increased Holding Capacity
- Smooth Engagement
- The Centerforce(R) Dual Friction(R) Clutch Series is a performance matched pressure plate & disc combination featuring the patented Centerforce centrifugal weight system (where applicable) and specialized machining processes to provide a performance clutch that offers exceptional street characteristics, while offering outstanding holding-capacity and durability. Furthermore, the Centerforce Dual Friction disc has an organic full facing on one side for longevity and an organic segmented facing on the other side providing increased holding capacity. Some applications have the organic segmented facings of both sides. The Dual Friction clutch is engineered for those who are looking for the ultimate in street/strip holding power and performance without sacrificing pedal effort and driver control. While the Dual Friction has been engineered primarily as a street clutch it can be used in mild competition applications.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1960 - Chevrolet Impala | V | 4638 | 8 Cyl 4.6L | 283 |
- Centerforce(R) Flywheels; Steel
- 168 Teeth; Weight 31.2 lbs.; 2/3 Bolt Pattern; 14.096 in. Outside Diameter; w/o Counter Balance
- Centerforce(R) SFI-certified steel flywheels are CNC-machined from billet steel for precise; no-hassle; bolt-in installation.
- Billet Steel Flywheel
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
-
Features:
- High Quality Billet Steel
- Cad/cam Designed And Cnc Machined
- Precision Balanced
- No-hassle Bolt-in
- Domestic And Import Applications
- Centerforce(R) steel flywheels are manufactured from high quality billet steel and match closely to the original equipment flywheel weight. Billet steel flywheels are available for popular import and domestic vehicles, including trucks. Centerforce steel flywheels are CAD/CAM-designed and CNC-machined from billet steel for precise, no-hassle, bolt-in installation. Centerforce billet steel flywheels are SFI-certified, so you know that you can count on them, on the street and on the track.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1960 - Chevrolet El Camino | V | 4638 | 8 Cyl 4.6L | 283 |
- SST 10.4; Clutch and Flywheel Kit
- 10.4 in. Dia.; 26 Spline; 1 1/8 in. Input Shaft; 925ft/lbs Trq.; 168 Teeth; Includes Cluth Disc/Flywheel/Bolts/Pilot Bearing/Alignment Tool
- The Centerforce(R) SST (Solid Street Twin) 10.4 Inch multi-disc clutch offers smooth engagement; light pedal; and high-end holding capacity for engine torque levels from 400 to 925 ft/lbs.
- SST Clutch And Flywheel Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts Which Are Known To The State Of California To Cause Cancer. For More Information Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
-
Features:
- Simple Install
- Introducing the NEW Centerforce(R) SST (Solid Street Twin). The SST clutch system has been engineered and developed for vehicles producing 400 to 925 ft/lbs of torque. The SST 10.4 in. discs utilize solid hubs (possible gear noise) to reduce the rotational weight on the input shaft for quick clean shifts. The discs in this assembly are built using high quality friction materials, for smooth engagement and longevity. The SST features a lightened billet steel flywheel, providing low inertia resulting in quicker RPM and the Centerforce anti-rattle system to reduce floater rattle/noise. No complicated setup or adjustments required, just bolt it in and "Get a Grip". The Centerforce SST includes a billet steel flywheel, 2 discs, floater plate, pressure plate, pilot bearing, alignment tool, and ARP pressure plate and flywheel hardware. The SST clutch system is an economical choice for streetcar enthusiasts looking for a complete high-quality twin disc clutch system. This new clutch assembly can be used for everyday use and spirited days on the track.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1960 - Chevrolet Biscayne | V | 4638 | 8 Cyl 4.6L | 283 |
- SST 10.4; Clutch and Flywheel Kit
- 10.4 in. Dia.; 1 1/8 in.; 10 Spline; 925 ft/lbs Torque Cap.; Solid Full Face Organic Twin Disc/Floater/Pilot Brg./Bolts/Alignment Tool
- The Centerforce(R) SST (Solid Street Twin) 10.4 Inch multi-disc clutch offers smooth engagement; light pedal; and high-end holding capacity for engine torque levels from 400 to 925 ft/lbs.
- Centerforce I Clutch And Flywheel Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning - Includes Nickel - Cancer. Www.p65warnings.ca.gov.
-
Features:
- 10.4 in. Diameter
- Introducing the NEW Centerforce(R) SST (Solid Street Twin). The SST clutch system has been engineered and developed for vehicles producing 400 to 925 ft/lbs of torque. The SST 10.4 in. discs utilize solid hubs (possible gear noise) to reduce the rotational weight on the input shaft for quick clean shifts. The discs in this assembly are built using high quality friction materials, for smooth engagement and longevity. The SST features a lightened billet steel flywheel, providing low inertia resulting in quicker RPM and the Centerforce anti-rattle system to reduce floater rattle/noise. No complicated setup or adjustments required, just bolt it in and "Get a Grip". The Centerforce SST includes a billet steel flywheel, 2 discs, floater plate, pressure plate, pilot bearing, alignment tool, and ARP pressure plate and flywheel hardware. The SST clutch system is an economical choice for streetcar enthusiasts looking for a complete high-quality twin disc clutch system. This new clutch assembly can be used for everyday use and spirited days on the track.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1960 - Chevrolet Biscayne | V | 4638 | 8 Cyl 4.6L | 283 |
- Street Pro: Kit:1957-85 GM 11" x 1-1/8x10
- Street Pro: Kit:1957-85 GM 11" x 1-1/8x10
- Product Attributes:
- Pilot Bushing Material: Bronze Oilite
- Pressure Plate Style: Diaphragm
- Application: 1957-85 Gm
- Alignment Tool Included: Yes
- Disc Material: Organic
- Pilot Bushing Included: Yes
- Horsepower Rating: 425
- Make: Gm
- Number of Discs: Single
- Disc Diameter: 11in.
- Spline: 1-1/8 X 10
- Throwout Bearing Included: Yes
- Flywheel Included: No
-
Features:
- McLeod Racing offers 4 levels of single disc clutches based on power and torque needs. The Street Level, Street Pro, Super Street Pro & the Street Extreme.
- The Street Pro is the perfect choice for an entry level performance clutch for the street. We recommend it for cars up to 400hp (depending on part number) with mild engine mods and street tires. Included is a high clamp load pressure plate, an organic disc for smooth and even engagement with increased holding power over stock. Our kits are complete with Pressure Plate, Disc, throw out bearing (where applicable) pilot bushing (where applicable) and alignment tool. If you are looking for a clutch that's a great step up from your stock set up, the McLeod Street Pro is the clutch for you.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1960 - Chevrolet P30 Series | V | 5704 | Manual | 8 Cyl 5.7L | Base | 348 |
- aluminum flywheel
- 0 Balance; 168 Teeth
- Aluminum flywheel Chevy 1955-85/262-427/0 bal./168T
- Aluminum Flywheel
-
Features:
- Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
- .250 in. Thick Steel Friction Insert
- Surface Ground For Optimum Disc Mating Surface
- Strictly Factory Warranty
- The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1960 - Chevrolet C20 Pickup | V | 4638 | 8 Cyl 4.6L | 283 |
- Centerforce(R) I and II; Clutch Friction Disc
- 10.4 in. Dia.; 10 Spline; 1 1/8 in. Input Shaft; Organic Friction
- The Centerforce I and II Discs are made from full high-quality friction full facings. These discs are made for Centerforce I and II pressure plates.
- Clutch Disc
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
- Diameter (in.): 10.400 In.
- Spline Size: 1.03125 In. - 10
-
Features:
- High Quality Friction Material
- Smooth Engagement
- Centerforce brings together high-quality friction materials and patented processes to give you top-of-the-line discs. Centerforce offers discs for the Centerforce I, Centerforce II, Dual Friction, LMC, and DFX series clutches. Each disc is designed to work best with a corresponding Centerforce pressure plate.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1960 - Chevrolet El Camino | V | 4638 | 8 Cyl 4.6L | 283 |
Showing 1 - 10 of 60 products
Loading...