Image
Product
Price
- Axle Hsg. Cover or Diff. Seal
- with 10 Bolt Holes Spicer 60 with 9.75in Ring Gear
- FEL-PRO RDS 6095-1 Axle Hsg. Cover or Diff. Seal
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
1685555, 1795158, 1922270, 2231855, 2232311, 2358865, 2428499, 2494737, 2515343, 2952471, 30281, 31978, 31979, 33232, 345660, 34686, 34687, 36016...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1969 - Plymouth Road Runner | Rear |
- Differential Drive Pinion Gear Nut
- with Dana 60 Axle
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
- Thread Size: .875-14
- Self Locking: Y
- Shaft Not Torque (Ft/Lbs): 47 Nm/20 To 35 Lbs
- Hex: 32.815mm
- Flange Diameter: 32.515mm
- Thickness: 15.875mm
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.
This Part Fits the Following OEM/Substitute Numbers:
2510524C1, DS30271, SP 30271
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1969 - Plymouth GTX | Rear Differential |
- Differential Pinion Seal
- with Dana 60 Axle
- FSGR
- Product Attributes:
- Inside Diameter (In): 1.860
- Axle Model: Dana 60, Dana 70
-
Features:
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
816675, DS42449, SP 42449
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1969 - Plymouth Fury | Rear |
- Differential Cover Gasket
- with 10 Bolt Holes with 8.25in Ring Gear ; Chrysler
- FEL-PRO RDS 55047 Differential Cover Gasket
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
2852922, 36012, 4049689, DS14211, DT007, P18564, P18564TC
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1969 - Plymouth Fury | Rear |
- Greaseable Premium Universal Joint
- with 2-1/8 (in) Outside Diameter Yoke Span with Lube Fitting in Body Premium with Lube Fitting in Body
- MOOG Greaseable Premium 315G U-joint
- Product Attributes:
- Bearing Cap Type: 4 Grooved Round Bearings
- Bearing Cap Axis 2 Diameter:
- 1.078
- 27.4
- Bearing Diameter A - mm: 27.3
- Length Axis 1:
- 2.125
- 54.0
- Length Axis 2:
- 2.125
- 54.0
- Length A - Inch: 2.125
- OE Series: Detroit 7260
- Length A - mm: 54.0
- Bearing Diameter A - Inch: 1.078
- Bearing Type B: Round Grooved
- Bearing Cap Axis 1 Diameter:
- 1.078
- 27.3
- Bearing Diameter B - Inch: 1.078
- Bearing Type A: Round Grooved
- Greaseable: Yes
- U-Joint Identification: 4 Grooved Round Bearings
- Image: Ujoint_4grooved.tif
- Length B - Inch: 2.125
- Length B - mm: 54.0
- Length Measurement B: Inside Of Groove To Inside Of Groove Plus Thickness Of 2 Lock Rings
- Bearing Diameter B - mm: 27.4
- Lube Fitting Location: Regular Lube Fitting In Cross
- Lubricateable: Yes
- Length Measurement A: Outside Of Groove To Outside Of Groove
-
Features:
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- GREASABLE DESIGN -- Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT -- Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
1-6301, 114-266, 114-267, 114-2HD, 114-2HP, 1306, 2-6302, 20030, 20205, 210-1306, 215-1306, 26302, 286300G, 45U0117, 5-1306X, 51306XU, 5589X, 5789X...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1969 - Plymouth Fury | At Rear Axle |
- Greaseable Premium Universal Joint
- with 2-1/8 (in) Outside Diameter Yoke Span with Lube Fitting in Body Premium with Lube Fitting in Body
- MOOG Greaseable Premium 315G U-joint
- Product Attributes:
- Bearing Cap Type: 4 Grooved Round Bearings
- Bearing Cap Axis 2 Diameter:
- 1.078
- 27.4
- Bearing Diameter A - mm: 27.3
- Length Axis 1:
- 2.125
- 54.0
- Length Axis 2:
- 2.125
- 54.0
- Length A - Inch: 2.125
- OE Series: Detroit 7260
- Length A - mm: 54.0
- Bearing Diameter A - Inch: 1.078
- Bearing Type B: Round Grooved
- Bearing Cap Axis 1 Diameter:
- 1.078
- 27.3
- Bearing Diameter B - Inch: 1.078
- Bearing Type A: Round Grooved
- Greaseable: Yes
- U-Joint Identification: 4 Grooved Round Bearings
- Image: Ujoint_4grooved.tif
- Length B - Inch: 2.125
- Length B - mm: 54.0
- Length Measurement B: Inside Of Groove To Inside Of Groove Plus Thickness Of 2 Lock Rings
- Bearing Diameter B - mm: 27.4
- Lube Fitting Location: Regular Lube Fitting In Cross
- Lubricateable: Yes
- Length Measurement A: Outside Of Groove To Outside Of Groove
-
Features:
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- GREASABLE DESIGN -- Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT -- Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1969 - Plymouth Fury I | At Transmission |
- Greaseable Premium Universal Joint
- Conventional Lube Fitting In Body with 2-1/8 (in) Outside Diameter Yoke Span Premium with Lube Fitting in Body
- MOOG Greaseable Premium 315G U-joint
- Product Attributes:
- Bearing Cap Type: 4 Grooved Round Bearings
- Bearing Cap Axis 2 Diameter:
- 1.078
- 27.4
- Bearing Diameter A - mm: 27.3
- Length Axis 1:
- 2.125
- 54.0
- Length Axis 2:
- 2.125
- 54.0
- Length A - Inch: 2.125
- OE Series: Detroit 7260
- Length A - mm: 54.0
- Bearing Diameter A - Inch: 1.078
- Bearing Type B: Round Grooved
- Bearing Cap Axis 1 Diameter:
- 1.078
- 27.3
- Bearing Diameter B - Inch: 1.078
- Bearing Type A: Round Grooved
- Greaseable: Yes
- U-Joint Identification: 4 Grooved Round Bearings
- Image: Ujoint_4grooved.tif
- Length B - Inch: 2.125
- Length B - mm: 54.0
- Length Measurement B: Inside Of Groove To Inside Of Groove Plus Thickness Of 2 Lock Rings
- Bearing Diameter B - mm: 27.4
- Lube Fitting Location: Regular Lube Fitting In Cross
- Lubricateable: Yes
- Length Measurement A: Outside Of Groove To Outside Of Groove
-
Features:
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- GREASABLE DESIGN -- Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT -- Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1969 - Plymouth Fury II | At Rear Axle |
- Greaseable Premium Universal Joint
- with 2-5/8 (in) Outside Diameter Yoke Span Greasable Premium
- MOOG Greaseable Premium 316 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Grooved Round Bearings
- Bearing Cap Axis 2 Diameter:
- 1.125
- 28.6
- Bearing Diameter A - mm: 28.5
- Length Axis 1:
- 2.625
- 66.7
- Length Axis 2:
- 2.625
- 66.7
- Length A - Inch: 2.625
- OE Series: Detroit 7290
- Length A - mm: 66.7
- Bearing Diameter A - Inch: 1.125
- Bearing Type B: Round Grooved
- Bearing Cap Axis 1 Diameter:
- 1.125
- 28.5
- Bearing Diameter B - Inch: 1.125
- Bearing Type A: Round Grooved
- Greaseable: Yes
- U-Joint Identification: 4 Grooved Round Bearings
- Image: Ujoint_4grooved.tif
- Length B - Inch: 2.625
- Length B - mm: 66.7
- Length Measurement B: Inside Of Groove To Inside Of Groove Plus Thickness Of 2 Lock Rings
- Bearing Diameter B - mm: 28.6
- Lube Fitting Location: Regular Lube Fitting In Cross
- Lubricateable: Yes
- Length Measurement A: Outside Of Groove To Outside Of Groove
-
Features:
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- GREASABLE DESIGN -- Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT -- Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1969 - Plymouth Satellite | At Transmission |
- Greaseable Premium Universal Joint
- Conventional Lube Fitting In Body with 2-1/8 (in) Outside Diameter Yoke Span Premium with Lube Fitting in Body
- MOOG Greaseable Premium 315G U-joint
- Product Attributes:
- Bearing Cap Type: 4 Grooved Round Bearings
- Bearing Cap Axis 2 Diameter:
- 1.078
- 27.4
- Bearing Diameter A - mm: 27.3
- Length Axis 1:
- 2.125
- 54.0
- Length Axis 2:
- 2.125
- 54.0
- Length A - Inch: 2.125
- OE Series: Detroit 7260
- Length A - mm: 54.0
- Bearing Diameter A - Inch: 1.078
- Bearing Type B: Round Grooved
- Bearing Cap Axis 1 Diameter:
- 1.078
- 27.3
- Bearing Diameter B - Inch: 1.078
- Bearing Type A: Round Grooved
- Greaseable: Yes
- U-Joint Identification: 4 Grooved Round Bearings
- Image: Ujoint_4grooved.tif
- Length B - Inch: 2.125
- Length B - mm: 54.0
- Length Measurement B: Inside Of Groove To Inside Of Groove Plus Thickness Of 2 Lock Rings
- Bearing Diameter B - mm: 27.4
- Lube Fitting Location: Regular Lube Fitting In Cross
- Lubricateable: Yes
- Length Measurement A: Outside Of Groove To Outside Of Groove
-
Features:
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- GREASABLE DESIGN -- Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT -- Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1969 - Plymouth Fury | At Transmission |
- Greaseable Premium Universal Joint
- with 2-5/8 (in) Outside Diameter Yoke Span Greasable Premium
- MOOG Greaseable Premium 316 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Grooved Round Bearings
- Bearing Cap Axis 2 Diameter:
- 1.125
- 28.6
- Bearing Diameter A - mm: 28.5
- Length Axis 1:
- 2.625
- 66.7
- Length Axis 2:
- 2.625
- 66.7
- Length A - Inch: 2.625
- OE Series: Detroit 7290
- Length A - mm: 66.7
- Bearing Diameter A - Inch: 1.125
- Bearing Type B: Round Grooved
- Bearing Cap Axis 1 Diameter:
- 1.125
- 28.5
- Bearing Diameter B - Inch: 1.125
- Bearing Type A: Round Grooved
- Greaseable: Yes
- U-Joint Identification: 4 Grooved Round Bearings
- Image: Ujoint_4grooved.tif
- Length B - Inch: 2.625
- Length B - mm: 66.7
- Length Measurement B: Inside Of Groove To Inside Of Groove Plus Thickness Of 2 Lock Rings
- Bearing Diameter B - mm: 28.6
- Lube Fitting Location: Regular Lube Fitting In Cross
- Lubricateable: Yes
- Length Measurement A: Outside Of Groove To Outside Of Groove
-
Features:
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- GREASABLE DESIGN -- Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT -- Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
114-1HD, 114-1HP, 114-231, 114-232, 1309, 2-1175, 20059, 20206, 210-1309, 215-1309, 281175, 45U0124, 5-1309X, 5636X, 5811X, DT1309, G5-1309X, SPL25-9X...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1969 - Plymouth Belvedere | At Rear Axle |
Showing 1 - 10 of 64 products
Loading...