Image
Product
Price
- For GM 9.5" (14 Bolt); 3.73 Ratio; Requires a 3.42 and Numerically Higher Ratio Carrier
- Motive Gear - Differential Ring and Pinion
- Differential Ring and Pinion
- Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type: Gm 9.5
- Ring Gear Diameter: 9.5
- Ring & Pinion Gear Ratio: 3.73
- Pinion Shaft Diameter: 1.876
- Ring Gear Material: 8620 Steel
- Ring Gear Rotation: Standard
- Ring Gear Bolt Quantity: 12
- Differential Carrier Break: 3.42 Ratio And Higher
- Pinion Spline Count: 30
- Cover Bolt Quantity: 14
- Pinion Gear Tooth Quantity: 11
- Ring Gear Tooth Quantity: 41
- Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
This Part Fits the Following OEM/Substitute Numbers:
1-2010-373, 14037999, 2-2010-373, 24166, 26015719, 26016527, 26054981, 26060556, 26066802, 40033264, 697-322, 743B730A, 88965785, GM9.5-373-NG, GM95373, SGM9502, YG GM9.5-373
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2003 - Hummer H2 | Rear |
- For GM 9.5" (14 Bolt); 3.42 Ratio; Requires a 3.42 and Numerically Higher Ratio Carrier
- Motive Gear - Differential Ring and Pinion
- Differential Ring and Pinion
- Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type: Gm 9.5
- Ring Gear Diameter: 9.5
- Ring & Pinion Gear Ratio: 3.42
- Pinion Shaft Diameter: 1.876
- Ring Gear Material: 8620 Steel
- Ring Gear Rotation: Standard
- Ring Gear Bolt Quantity: 12
- Differential Carrier Break: 3.42 Ratio And Higher
- Pinion Spline Count: 30
- Cover Bolt Quantity: 14
- Pinion Gear Tooth Quantity: 12
- Ring Gear Tooth Quantity: 41
- Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
This Part Fits the Following OEM/Substitute Numbers:
1-2010-342, 14038000, 20914868, 24502, 26015981, 26016526, 26058344, 26060559, 40051784, 40173817, 743B730, 84032508, G895342, GM9.5-342-NG, GM95342, SGM9501, YG GM9.5-342
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2003 - Hummer H2 | Rear |
- Differential Master Bearing Kit - Koyo
- For GM 9.5" (14 Bolt); Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
- Motive Gear - Differential Master Bearing Kit - Koyo
- Differential Bearing Kit
- Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type: Gm 9.5
- Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
This Part Fits the Following OEM/Substitute Numbers:
83-1067-1, R9.5GRLMKT, XL-1067-1, ZK GM9.5-B
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2003 - Hummer H2 | Rear |
- Greaseable Super Strength Universal Joint
- Greasable Super Strength U-Joint
- MOOG Greaseable Super Strength 235 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Grooved Round Bearings
- Bearing Cap Axis 2 Diameter:
- 1.125
- 28.6
- Bearing Diameter A - mm: 28.5
- Length Axis 1:
- 2.557
- 64.9
- Length Axis 2:
- 2.557
- 64.9
- Length A - Inch: 2.557
- OE Series: Mechanics 3, Saginaw 44 And American Axle 1344
- Length A - mm: 64.9
- Bearing Diameter A - Inch: 1.125
- Bearing Type B: Round Grooved
- Bearing Cap Axis 1 Diameter:
- 1.125
- 28.5
- Bearing Diameter B - Inch: 1.125
- Bearing Type A: Round Grooved
- Greaseable: Yes
- U-Joint Identification: 4 Grooved Round Bearings
- Image: Ujoint_4grooved.tif
- Length B - Inch: 2.557
- Length B - mm: 64.9
- Length Measurement B: Inside Of Groove To Inside Of Groove Plus Thickness Of 2 Lock Rings
- Bearing Diameter B - mm: 28.6
- Lube Fitting Location: Flush-type Lube Fitting In Bearing
- Lubricateable: Yes
- Length Measurement A: Outside Of Groove To Outside Of Groove
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- GREASABLE DESIGN -- Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
2157105, 45U0110
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2003 - Hummer H2 | Front Driveshaft at Transfer Case | AWD |
- Greaseable Premium Universal Joint
- 0.056 (in) Ring Thickness Premium with .056 (in) Snap Ring Dimension
- MOOG Greaseable Premium 331A U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.188
- 30.1
- Bearing Diameter A - mm: 30.2
- Length Axis 1:
- 3.625
- 92.1
- Length Axis 2:
- 3.625
- 92.1
- Length A - Inch: 3.625
- OE Series: Spicer 1350 (spl30)
- Length A - mm: 92.1
- Bearing Diameter A - Inch: 1.188
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.188
- 30.2
- Bearing Diameter B - Inch: 1.188
- Bearing Type A: Round Plain
- Greaseable: Yes
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.625
- Length B - mm: 92.1
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 30.1
- Lube Fitting Location: Regular Lube Fitting In Cross
- Lubricateable: Yes
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- GREASABLE DESIGN -- Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT -- Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2003 - Hummer H2 | Rear Driveshaft at Transmission | AWD |
- Greaseable Premium Universal Joint
- 0.056 (in) Ring Thickness Premium with .056 (in) Snap Ring Dimension
- MOOG Greaseable Premium 331A U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.188
- 30.1
- Bearing Diameter A - mm: 30.2
- Length Axis 1:
- 3.625
- 92.1
- Length Axis 2:
- 3.625
- 92.1
- Length A - Inch: 3.625
- OE Series: Spicer 1350 (spl30)
- Length A - mm: 92.1
- Bearing Diameter A - Inch: 1.188
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.188
- 30.2
- Bearing Diameter B - Inch: 1.188
- Bearing Type A: Round Plain
- Greaseable: Yes
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.625
- Length B - mm: 92.1
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 30.1
- Lube Fitting Location: Regular Lube Fitting In Cross
- Lubricateable: Yes
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- GREASABLE DESIGN -- Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT -- Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
21355, 5142222AA, 68004848AC, 88964507
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2003 - Hummer H2 | Rear Driveshaft at Rear Axle | AWD |
- Greaseable Premium Universal Joint
- Premium with .056 (in) Snap Ring Dimension
- MOOG Greaseable Premium 331A U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.188
- 30.1
- Bearing Diameter A - mm: 30.2
- Length Axis 1:
- 3.625
- 92.1
- Length Axis 2:
- 3.625
- 92.1
- Length A - Inch: 3.625
- OE Series: Spicer 1350 (spl30)
- Length A - mm: 92.1
- Bearing Diameter A - Inch: 1.188
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.188
- 30.2
- Bearing Diameter B - Inch: 1.188
- Bearing Type A: Round Plain
- Greaseable: Yes
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.625
- Length B - mm: 92.1
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 30.1
- Lube Fitting Location: Regular Lube Fitting In Cross
- Lubricateable: Yes
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- GREASABLE DESIGN -- Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT -- Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2003 - Hummer H2 | Rear Driveshaft at Transmission | AWD |
- Greaseable Premium Universal Joint
- Premium with .056 (in) Snap Ring Dimension
- MOOG Greaseable Premium 331A U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.188
- 30.1
- Bearing Diameter A - mm: 30.2
- Length Axis 1:
- 3.625
- 92.1
- Length Axis 2:
- 3.625
- 92.1
- Length A - Inch: 3.625
- OE Series: Spicer 1350 (spl30)
- Length A - mm: 92.1
- Bearing Diameter A - Inch: 1.188
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.188
- 30.2
- Bearing Diameter B - Inch: 1.188
- Bearing Type A: Round Plain
- Greaseable: Yes
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.625
- Length B - mm: 92.1
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 30.1
- Lube Fitting Location: Regular Lube Fitting In Cross
- Lubricateable: Yes
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- GREASABLE DESIGN -- Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT -- Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2003 - Hummer H2 | Rear Driveshaft at Rear Axle | AWD |
- New CV Axle Shaft
- New CV Axle Shaft
- CV Axle Shaft
- Product Attributes:
- Outboard Bolt Head Size (mm): N/a
- Axle Nut Height (in): 6/7
- Axle Bolt Hex Size (mm): N/a
- Axle Nut Head Type: Hex
- Number Of Inboard Joint Bolt Holes: N/a
- Outboard Bolt Length (mm): N/a
- Outboard Bolt Head Type: N/a
- Inboard Shaft Connection Style: Flange
- Inboard Bolt Length (in): N/a
- Axle Nut Thread Size: M24*2
- Axle Bolt Thread Size: N/a
- Number Of Outboard Joint Bolt Holes: N/a
- Axle Nut Length (mm): 41.5
- Axle Nut Locking Type: Self-lock
- Boot Material: Neoprene
- Inboard Bolt Head Size (in): N/a
- Number Of Inboard Shaft Bolts: N/a
- Outboard Bolt Head Size (in): N/a
- Inboard Joint Type: Flange
- Overall Compressed Length (in): 21.65
- Abs Ring Type: N/a
- Axle Nut Hex Size (in): 1 3/7
- Number Of Inboard Splines: N/a
- Axle Nut Height (mm): 21.5
- Number Of Outboard Shaft Bolts: N/a
- Outboard Joint Bolt Thread Size: N/a
- Outboard Bolt Length (in): N/a
- Outboard Joint Type: Conventional
- Axle Nut Included: Yes
- Inboard Bolt Head Size (mm): N/a
- Number Of Outboard Splines: 33
- Axle Bolt Length (mm): N/a
- Inboard Bolt Length (mm): N/a
- Outboard Shaft Connection Style: Conventional
- Inboard Bolt Head Type: N/a
- Axle Nut Length (in): 1 5/8
- Overall Compressed Length (mm): 550
- Inboard Bolt Thread Size: N/a
- Limited Lifetime Warranty. ABS axles fit non-ABS applications unless otherwise noted. ISO 9001:1007 and TS 16949:2009 Certified Company
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2003 - Hummer H2 | Front Left | AWD |
- New CV Axle Shaft
- New CV Axle Shaft
- CV Axle Shaft
- Product Attributes:
- Outboard Bolt Head Size (mm): N/a
- Axle Nut Height (in): 6/7
- Axle Bolt Hex Size (mm): N/a
- Axle Nut Head Type: Hex
- Number Of Inboard Joint Bolt Holes: N/a
- Outboard Bolt Length (mm): N/a
- Outboard Bolt Head Type: N/a
- Inboard Shaft Connection Style: Flange
- Inboard Bolt Length (in): N/a
- Axle Nut Thread Size: M24*2
- Axle Bolt Thread Size: N/a
- Number Of Outboard Joint Bolt Holes: N/a
- Axle Nut Length (mm): 41.5
- Axle Nut Locking Type: Self-lock
- Boot Material: Neoprene
- Inboard Bolt Head Size (in): N/a
- Number Of Inboard Shaft Bolts: N/a
- Outboard Bolt Head Size (in): N/a
- Inboard Joint Type: Flange
- Overall Compressed Length (in): 21.65
- Abs Ring Type: N/a
- Axle Nut Hex Size (in): 1 3/7
- Number Of Inboard Splines: N/a
- Axle Nut Height (mm): 21.5
- Number Of Outboard Shaft Bolts: N/a
- Outboard Joint Bolt Thread Size: N/a
- Outboard Bolt Length (in): N/a
- Outboard Joint Type: Conventional
- Axle Nut Included: Yes
- Inboard Bolt Head Size (mm): N/a
- Number Of Outboard Splines: 33
- Axle Bolt Length (mm): N/a
- Inboard Bolt Length (mm): N/a
- Outboard Shaft Connection Style: Conventional
- Inboard Bolt Head Type: N/a
- Axle Nut Length (in): 1 5/8
- Overall Compressed Length (mm): 550
- Inboard Bolt Thread Size: N/a
- Limited Lifetime Warranty. ABS axles fit non-ABS applications unless otherwise noted. ISO 9001:1007 and TS 16949:2009 Certified Company
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1208, 15868120, 179026, 20875738, 26069242, 40-16117, 410273, 5270N, 60-1325, 66-1325, 70151, 706735, 70975, 70975XD, 80-1516, 80-5091, 800273, 9421...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2003 - Hummer H2 | Front Right | AWD |
Showing 1 - 10 of 126 products
Loading...