2012 Chevrolet Cheyenne Rack and Pinion Assembly Cardone

★★★★☆ 4.5/5 36 ratings
  • Features:
  • Protective coating applied to each unit to extend the life of the unit (where applicable).
  • 100% performance testing to ensure perfect fit, function and reliable performance.
  • 100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
  • Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
  • 100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
  • All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
  • Valve housings have polished micro-finish sleeves for durability (where applicable).
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
with Hydraulic Power
Includes Inner Tie Rods
For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system
In-Line Filter available
Remanufactured Rack and Pinion Assembly
This Part Fits the Following OEM/Substitute Numbers:
15254060, 15254062, 19133646, 19133648, 19133648, 19153072, 19153072, 19153073, 19153074, 19153074, 19153075, 19178559, 19178559, 19178561, 19207489, 19207490, 19207491, 19207491, 19207492
Best Price:
USD
BrandCardone
Part #22-1036
ConditionNew
UPC082617791205
Cheyenne Cardone Rack and Pinion Assembly 2012 Chevrolet
Additional Fitment Information:
Vehicle
2012 Chevrolet Cheyenne
  • with Hydraulic Power
    Includes Inner Tie Rods
    For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system
    In-Line Filter available
  • Remanufactured Rack and Pinion Assembly
Cardone is one of the world's premier manufacturers and Re-manufacturers. These two major product lines are defined as the famous remanufactured auto parts brand called A1 Cardone and the selection of brand new auto parts from Cardone Select. Since day one, remanufacturing auto parts (the renewal of worn parts back to new or better performance), has been the core of Cardone's business.
A1 Cardone products are the highest quality remanufactured parts in the automotive aftermarket because they don't just replace broken components. They completely disassemble every worn part, also known as a "core", and thoroughly clean and inspect every component. Through reverse engineering, they pinpoint original equipment design weaknesses through examining common wear areas to incorporate fixes into the remanufacturing process as needed to produce reliable products.
The same reverse-engineering experience that comes from the remanufacturing process is the foundation of Cardone Select's premium, all-new auto parts. Since they've seen where and why the original parts typically fail, Cardone's engineers include improvements into the Cardone Select new product designs. Cardone Select products are literally "built better from the start".


General

Bellows Color
Black
Contains Electronic Components
No
Does it require SDS
No
End To End Length
  • 1393.82
  • 54.875
FAA A1
The Most Likely Cause Of A Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled. This May Take A Few Attempts Depending On The Design Of The System.
FAA A2
The Geometry Of The Front Suspension Is Designed To Return The Steering Wheel To Center Coming Out Of A Turn. If The Steering Wheel Is Not Returning To Center On Its Own When Coming Out Of A Turn, Check The Front-end Alignment Settings And Inspect For Bin
FAA A3
No. The Rack And Pinion Has Been Adjusted At The Factory. No Additional Adjustment Is Necessary. Try Isolating The Rack To Find Out Where The Play Exists. If You Hold The Inner Tie Rod And Have Someone Turn The Wheel, Does The Play Disappear? If So, The P
FAA A4
Yes, The Boot Clamps Must Be Loosened To Set The Toe Adjustment When Performing A Front-end Alignment. Failure To Loosen The Clamps Will Twist The Boots During Turning Maneuvers Causing Cracks To Form On Boot. Once The Boot Is Torn, Road Debris And Water
FAQ Q1
I Replaced The Rack And Now The Power Steering Pump Is Whining. It Never Did This Before! What Happened?
FAQ Q2
The Steering Wheel Is Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
FAQ Q3
The Replacement Rack And Pinion Is Installed And The Steering Wheel Has Too Much Play. Should I Adjust The Rack?
FAQ Q4
Are There Any Steps That Should Be Done Prior To Alignment?
Gasket Or Seal Included
Yes
Grade Type
Regular
Inlet Line Fitting Diameter
  • 0.462
  • 11.73
Inlet Line Fitting Gender
Male
Inner Tie Rods Included
Yes
Input Shaft Type
Double Flat
Is Item A Chemical
No
Is Or Contains A Battery
No
Is Or Contains A Bulb
No
Is Prop Sixty Five Affected
No
Is the item CARB affected
No
Mounting Brackets Included
No
Mounting Hardware Included
No
Mounting Hole Quantity
4
Outer Tie Rods Included
No
Outlet Line Fitting Diameter
  • 0.451
  • 11.46
Outlet Line Fitting Gender
Male
Product Condition
Remanufactured
Steering Input Shaft Diameter
  • 0.785
  • 19.93
Total Turns Lock To Lock
3
Type
Hydraulic
Information on technical characteristics, the delivery set, the country of manufacture and the appearance of the goods is for reference only and is based on the latest information available at the time of publication.
  1. There are no active reviews for this product yet.

Loading...