Image
Product
Price
- Oil Filter
- H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: M20 X 1.500 In.
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 0.600 Lbs. (0.2 Kg)
- Product Box Height: 3.630 In. (92mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Outside Diameter: 2.688 In. (68mm)
- Removal Nut: Yes
- Item Height: 2.875 In. (73mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - INFINITI QX56 |
- Oil Filter
- H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: M20 X 1.500 In.
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 0.600 Lbs. (0.2 Kg)
- Product Box Height: 3.630 In. (92mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Outside Diameter: 2.688 In. (68mm)
- Removal Nut: Yes
- Item Height: 2.875 In. (73mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
1173228, 11930535150, 11930535151, 1321800010, 1520831UOB, 1520865F0C, 1520865F0E, 15208AA12A, 15208K010, 15400PFB004, 15400PFB014, 15400PJ7005, 15400PM3004, 15410MFJD01, 158332430, 1585332430, 1585399179, 1857444...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - INFINITI G25 | V | 2496 | 6 Cyl 2.5L | 152 |
- Nissan VQ35HR/VQ37VHR Cylinder Head Gasket
- 0.075 in. Multi-Layer Steel-5; 97mm Bore
- Nissan VQ35DE Version 2/VQ35HR/VQ37VHR .075in. MLS Cylinder Head Gasket; 97mm Bore; RHS
- Cylinder Head Gasket
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
- Engine Make/Size: Nissan Gen 3 Vq35hr 3.5l/vq37vhr 3.7l
-
Features:
- Utilizes Stainless Steel For Increased Strength
- Embossed Outer Layers Coated w/Viton Rubber Material
- Designed To Meet The Demands Of A Variety Of Harsh Sealing Cond.
- The Cometic MLS gasket is comprised of three to five layers of stainless steel. Cometic uses stainless steel for increased strength, its ability to rebound and resist corrosion. The outer layers of the gasket are embossed and coated on both sides with a Viton rubber material designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 250°C or 482°F.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - INFINITI G37 | Right |
- Nissan VQ35HR/VQ37VHR Cylinder Head Gasket
- 0.075 in. Multi-Layer Steel-5; 97mm Bore
- Nissan VQ35DE Version 2/VQ35HR/VQ37VHR .075in. MLS Cylinder Head Gasket; 97mm Bore; LHS
- Cylinder Head Gasket
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
- Engine Make/Size: Nissan Gen 3 Vq35hr 3.5l/vq37vhr 3.7l
-
Features:
- Utilizes Stainless Steel For Increased Strength
- Embossed Outer Layers Coated w/Viton Rubber Material
- Designed To Meet The Demands Of A Variety Of Harsh Sealing Cond.
- The Cometic MLS gasket is comprised of three to five layers of stainless steel. Cometic uses stainless steel for increased strength, its ability to rebound and resist corrosion. The outer layers of the gasket are embossed and coated on both sides with a Viton rubber material designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 250°C or 482°F.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - INFINITI G37 | Left |
- Nissan VQ35HR/VQ37VHR Cylinder Head Gasket
- 0.075 in. Multi-Layer Steel-5; 97mm Bore; Left Hand Side
- Nissan VQ35DE Version 2/VQ35HR/VQ37VHR .075in. MLS Cylinder Head Gasket; 97mm Bore; LHS
- Cylinder Head Gasket
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
- Engine Make/Size: Nissan Gen 3 Vq35hr 3.5l/vq37vhr 3.7l
-
Features:
- Utilizes Stainless Steel For Increased Strength
- Embossed Outer Layers Coated w/Viton Rubber Material
- Designed To Meet The Demands Of A Variety Of Harsh Sealing Cond.
- The Cometic MLS gasket is comprised of three to five layers of stainless steel. Cometic uses stainless steel for increased strength, its ability to rebound and resist corrosion. The outer layers of the gasket are embossed and coated on both sides with a Viton rubber material designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 250°C or 482°F.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - INFINITI G37 | Left |
- Nissan VQ35HR/VQ37VHR Cylinder Head Gasket
- 0.075 in. Multi-Layer Steel-5; 97mm Bore; Right Hand Side
- Nissan VQ35DE Version 2/VQ35HR/VQ37VHR .075in. MLS Cylinder Head Gasket; 97mm Bore; RHS
- Cylinder Head Gasket
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
- Engine Make/Size: Nissan Gen 3 Vq35hr 3.5l/vq37vhr 3.7l
-
Features:
- Utilizes Stainless Steel For Increased Strength
- Embossed Outer Layers Coated w/Viton Rubber Material
- Designed To Meet The Demands Of A Variety Of Harsh Sealing Cond.
- The Cometic MLS gasket is comprised of three to five layers of stainless steel. Cometic uses stainless steel for increased strength, its ability to rebound and resist corrosion. The outer layers of the gasket are embossed and coated on both sides with a Viton rubber material designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 250°C or 482°F.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - INFINITI G37 | Right |
- Nissan VQ35HR/VQ37VHR Cylinder Head Gasket
- 0.075 in. Multi-Layer Steel-5; 97mm Bore; Left Hand Side
- Nissan VQ35DE Version 2/VQ35HR/VQ37VHR .075in. MLS Cylinder Head Gasket; 97mm Bore; LHS
- Cylinder Head Gasket
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
- Engine Make/Size: Nissan Gen 3 Vq35hr 3.5l/vq37vhr 3.7l
-
Features:
- Utilizes Stainless Steel For Increased Strength
- Embossed Outer Layers Coated w/Viton Rubber Material
- Designed To Meet The Demands Of A Variety Of Harsh Sealing Cond.
- The Cometic MLS gasket is comprised of three to five layers of stainless steel. Cometic uses stainless steel for increased strength, its ability to rebound and resist corrosion. The outer layers of the gasket are embossed and coated on both sides with a Viton rubber material designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 250°C or 482°F.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - INFINITI G37 | Left |
- Nissan VQ35HR/VQ37VHR Cylinder Head Gasket
- 0.075 in. Multi-Layer Steel-5; 97mm Bore; Right Hand Side
- Nissan VQ35DE Version 2/VQ35HR/VQ37VHR .075in. MLS Cylinder Head Gasket; 97mm Bore; RHS
- Cylinder Head Gasket
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
- Engine Make/Size: Nissan Gen 3 Vq35hr 3.5l/vq37vhr 3.7l
-
Features:
- Utilizes Stainless Steel For Increased Strength
- Embossed Outer Layers Coated w/Viton Rubber Material
- Designed To Meet The Demands Of A Variety Of Harsh Sealing Cond.
- The Cometic MLS gasket is comprised of three to five layers of stainless steel. Cometic uses stainless steel for increased strength, its ability to rebound and resist corrosion. The outer layers of the gasket are embossed and coated on both sides with a Viton rubber material designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 250°C or 482°F.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - INFINITI G37 | Right |
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - INFINITI M56 |
- Oil Filter
- H-3.75 in.; PD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 0.600 Lbs. (0.3 Kg)
- Product Box Height: 4.130 In. (105mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 2.810 In. (71 Mm)
- Package Material: Paperboard
- Product Box Length: 2.880 In. (73mm)
- PSI Relief Valve: 11-17
- Outside Diameter: 2.688 In. (68mm)
- Removal Nut: Yes
- Item Height: 3.750 In. (95mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
0410755, 0410769, 0410789, 0410797, 0410812, 0418064, 0418075, 0418076, 0418135, 0986452036, 102827901, 1041426, 1041427, 11715829, 11715849, 120137, 120722, 122497...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - INFINITI QX56 | V | 5552 | 8 Cyl 5.6L | - |
Showing 1 - 10 of 247 products
Loading...